|
Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
|
|
|
Be, thanks for bringing up the "subharmonics" in the way that you have done, for another good look at the elusive-to-hi-fi "undertones". I have been bitching about and futzing with this for ages, and now am I working with the drivers, themselves, t...
|
Well, why not go 1st order with those little "woofers"? And I suppose you will be glad that you've isolated the MF, too.Unless you just get lucky, it looks like the MF/HF XO might be dropping. I am not familiar with the 2105, but dependin...
|
But why would you consider brass connectors because of 95% of boutique RCA if the idea is to wind up with the best signal path?Probably, you will not use continuous wire from the cartridge coil, and you will probably not solder but use some sort of c...
|
Romy's comments in blue :"...Interesting, as all my drivers, the AK151 and K15/40 are high impedance (15R-16R, DCR around 12R). I do not see a lot of difference between AK151 and K15/40..."Apart from the color the baskets were painted (silver Hammeri...
|
Paul, I am no expert on tapped horns but I think the main (40 year old) principle is that you join the back wave of the driver with the front wave, now in order to have the 2 wave fronts meet, the back wave should travel a certain distance depending ...
|
I have had similar impressions to other speakers using these drivers. For example I found the top of the line Avalon Eidolon diamond to be similarly colorless and lifeless. Also a pair of Vaic speakers (designed by the guy from Lumenwhite...
|
In our experiments, the more power we threw at the A7s, the better they worked. I heard some of the original "theater" version Altecs playing with their original "dedicated" Altec amps, and these sounded considerably better; but I never got ahol...
|
Romy, Our bass driver has a 12v field coil motor, it developes just over 20 kilogauss flux density using a low carbon steel pole piece. The exit diameter is 4 inches at the moment. The diaphragm is 6 inches in diameter and mad...
|
[quote user="JLH"] In addition, the idea of an ultimate horn profile does not make any sense. Each and every horn profile has its own strengths and weakness. Depending on your goals, and the drivers you have, one profile will be "bett...
|
It is a good question that I also asked when I saw this speaker. Afterall, everything being equal using the same materials for the drivers is more optimal from a coloration standpoint. My guess is cost. They already had splurged for...
|
I completely agree with what you said. To tell you the truth I was already very satisfied with sound, but I just wanted to make that powerful triode amplifier - I really don't need it. But it's nice to have it. As you know in this hobby it's not so m...
|
hi Dominic i made myself the same question regarding the high frequencies in the orphean horn. the reason is probably because this horn has no compression, and the horn length is not so deep, and the exit diameter is 2 inch, quit big. If you read my ...
|
OK, I have one foot back in the water again, a hand-me-down monoblock from a "well-respected movie sound producer", to whom I am connected through dear friends. Like most "sound professionals", he is fairly dismissive of the way "we" hi-fi nerds go ...
|
Decoud, you will only know if you try it, but my long experience with the Lowther makes me doubt its suitability for your situation. Perhaps there are other, more suitable single drivers, I don't know. While I have no idea at all what you want to w...
|
I would have to believe there were big sonic gains in store before I went through the trouble of designing, building, testing, (and re-building) and integrating giant horns in any house. Romy, as I recall, you already have enough 15" drivers on hand...
|
I agree that the right 15" is a nice size for mid-upper bass. I suppose yours are the 15" Vitavoxes that were made to go in boxes? Of course, the usual reason for ports is to "extend" LF, and most modern LF drivers are used in something like this, ...
|
Haralanov, I've spun this thread off the "Speakers for a Powerful SET" thread, as you suggested. I took a couple of pictures, but I can't figure out how to upload them, just yet. I'm also not sure what you could see from the outside, anyway.As for th...
|
This stuff has been stuck in my mind for some time now, working around in there against my ongoing experience, against what I am now running. The goal is a more dynamic presentation with better spectral balance, with the emphasis on LF and [more] cor...
|
Mani, I am not saying that any driver (let alone any collection of drivers...) will ever be entirely "correct" in terms of acoustical instrumental timbre, no matter the frequency range it attempts to address. I am saying that the sonic "weight balan...
|
Romy, the first time that I noticed that the speaker wires are very important to the sound was when Steve put some very expensive audiophile wires in place of our normal magnet wire. I walked into the room while familiar musi...
|
[quote user="drdna"]Looking again at the EdgarHorns, the placement in the room seems nearly optimal and they are now properly time aligned. Looking at the phase of the individual drivers and listening to each of them individually revealed that ...
|
Romy, it sounds like you are well into this, already. We used to use extremely sheer silk with our "secret" doping formulae. The key is to keep it as thin and flexible as possible. Today, I would look for resin/glue with "fibers" in it to bridge t...
|
Wojtek, I do use 8 Ohm drivers, and I am mildly curious about the "pattern" thing. As I said in posted responses to Bud, I +/- accept the science but suspect the implementation in this case; however, I would be happy to give a listen...
|
The best midrange comes from compression drivers, it has that minuteness, transparency and dynamics that no other topology can offer; the main problem with them is that they only cover a very specific mid frequency ran...
|
Three problems with the Scan-Speak are the low X-max, the built-in response curve, and limited power handling. It will be interesting to see how you juggle these issues if you do use these guys for LF. Obviously, if you bias against the natural ris...
|
Hello guys! I got an old Coral X-VIII from Japan. Its an Onken enclosure with a 400 Hz horn. And I want to give it a second life. The enclosure looks already like new. And the question is about the crossover. What would be the theoretical best points...
|
HI "Hifiordie" I want to tell the readers here that this guy is seriuos and has some serious talent.Unluckily for him he has been bitten by the same insect that got us and is obsessed by horns, please do listen to Romy and try to balance your life b...
|
Robin, your explication already includes a great sense of where you are and what you are after, and this should save you a lot of time. I like Romy's ideas as time savers, as well. On the hardware front, given what you say you are looking for, I thin...
|
Hello , Ive just came across this site , Im an audiophile from Chile . So I decided to join and learn from here . Sorry if my future posts doesnt make sense 100% , it will be because English is not my first language, so youre warned . :-)My last audi...
|
I no doubt fall into the category of the 70%. My playback has not been as satisfying as I would like. Many of us do not know where to turn when we hit a brick wall with extracting the best results. The default reaction is to look for a piece of equ...
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
Last 24-hours posts: |
1 |
|
|
|
Total human visitors: |
43,014,739 |
|
|
|
|
|
|