| Search | Login/Register
   Home » Horn-Loaded Speakers» Synergy Horn (1 post, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (1 items) Select Pages: 
07-28-2012 Post does not mapped to Knowledge Tree
rowuk


Germany
Posts 454
Joined on 07-05-2012

Post #: 1
Post ID: 18455
Reply to: 18455
Synergy Horn
fiogf49gjkf0d
If you read Danleys paper, you see that the lower you go in frequency, the more this device turns into a direct radiator. He just vents the HF drivers from the throat, more or less optimised, the midrange drivers a bit further out and the LF drivers very close to the mouth.
There is no acoustic time alignment, there is plenty of room for intermodulation as the HF drivers occupy the same (high) pressurized space as the LF and MF drivers. The crossover can get the "alignment", but there is no cure for the IMD.
If point source is your only goal, then this is fine. For those that hear point source for the first time, they are exposed to specific effects that are new and in the beginning, wonderful. This has nothing to do with "higher fidelity" however. I see no advantage in this approach for serious listening over high quality "fullrange" drivers - except perhaps power handling.


Whenever I feel blue, I start breathing again.
Page 1 of 1 (1 items) Select Pages: 
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts