| Search | Login/Register
   Home » Melquiades Amplifier » Single-stage Melquiades vs. DHT amps (398 posts, 19 pages)
  Print Thread | 1st Post |  
Page 4 of 16 (398 items) Select Pages:  « First ... « 2 3 4 5 6 » ... Last »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  DHT driver & input..  Effects of radiation...  Melquiades Amplifier  Forum     25  237803  02-01-2007
  »  New  The one-stage Melquiades...  It's time, what amorphous opt...  Melquiades Amplifier  Forum     74  654916  04-21-2007
  »  New  The single-stage Milq and power Supplies...  Just the tank...  Melquiades Amplifier  Forum     10  95682  05-03-2007
  »  New  The 6E5P tube data...  Bartola Valves: 6e5p beam tetrode SPICE model...  Melquiades Amplifier  Forum     44  463867  07-23-2007
  »  New  6 Channel Version of Super Melquiades..  The first Milq screw up....  Melquiades Amplifier  Forum     131  1202736  08-08-2007
  »  New  My (Amplification + Acoustic System): what is next?..  Macondo and Melquiades in the NEW room....  Audio Discussions  Forum     41  301281  01-10-2008
  »  New  Incorporating active crossovers into DSET..  Thanks...  Melquiades Amplifier  Forum     2  43991  07-22-2008
  »  New  About the life-expectancy of the new production tubes...  Stressing the damn contemporary tubes....  Audio Discussions  Forum     9  89600  12-29-2008
  »  New  Small SET’s bass, besides everything- is it about power..  Importance of OPT and type of tube for SET amp bass per...  Audio Discussions  Forum     4  82724  01-12-2009
  »  New  Macondo: new horizons. A few thoughts in context Zander..  What does make a playback to stop?...  Playback Listening  Forum     9  72238  02-02-2009
  »  New  The period DHT tubes and Swastika..  Maybe there is another solution...  Melquiades Amplifier  Forum     1  27264  04-30-2009
  »  New  Some thoughts about Milq’s MF filter..  High-Pass RL Filter calculator....  Melquiades Amplifier  Forum     2  33396  05-02-2009
  »  New  The DHOFT topology? Do not try it home...  A medley of slow-cooked triodes....  Melquiades Amplifier  Forum     3  46631  05-04-2009
  »  New  Why the tubes shall be the same?..  Not optional anymore?...  Melquiades Amplifier  Forum     7  61913  05-11-2009
  »  New  Valve Technology Timeline..  A good video about tubes making....  Audio Discussions  Forum     5  95305  06-18-2006
  »  New  The DSET perspective examines the Herb Reichert article..  Are you still in Reutlingen, Germany?...  Melquiades Amplifier  Forum     5  93872  07-01-2009
  »  New  About the Critical Audio Tune ™..  “Critical Audio Tune” bay-leave in the soup......  Playback Listening  Forum     5  50593  08-29-2009
  »  New  A full-range quality-triode? Does Size mater?..  A full-range quality-triode? Does Size mater?...  Melquiades Amplifier  Forum     0  16917  12-02-2009
  »  New  About Stupid Dynamic..  Misplaced dynamics....  Playback Listening  Forum     1  20944  08-21-2011
12-26-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 76
Post ID: 9272
Reply to: 9271
6SN7-2A3 amps?
fiogf49gjkf0d

 drdna wrote:
I also use the 6SN7-2A3 DHT for my system (except subwoofer). Did you use the Electrocubes for the coupling capacitors? Was the internal wiring regular copper?

The coupling capacitor is critical, of course.

Also, I will say that silver wire, which many people hate: the fact is that it is a better conductor. My opinion is that the silver wire reveals a problem that is creating harshness and brightness from the OTHER parts of the system, perhaps from bad electricity as well.

In my amplifier, careful choice of the coupling capacitor and using silver wire in the signal path corrected the problem of the sound being syrupy like in a dream where you are running is low motion.

I did not do anything with San-Audio SV-2A3 amp. I juts built to it original state. The parts in there are crap, including the coupling capacitor, I did not change anything, I need to order the parts to do the change but am not convinced that I will stay with 6SN7. Are you driving your 2A3 right from 6SN7 or you use the second part of 6SN7 as a direct-coupled second gain stage? I would like topologically to stay with 2 channels only as I do not need a lot of gain, quite opposite but  I might keep the 6SN7 – it is a good tube. I might even drop the cap from cathode bias in 2A3 – it shell kill all gain but it is what I might need. I do not know yet.

Can you post or explain the topology of your 6SN7-2A3?

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-26-2008 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,570
Joined on 10-12-2006

Post #: 77
Post ID: 9273
Reply to: 9272
Type Casting
fiogf49gjkf0d
Romy, the 6SN7 with 2A3, per se, even if slower than your 1-stage jobbies, should not be slow in the sense you describe, so something else must be up.

If you get that far, you will eventually want "good" 6SN7s, for color and clarity (yes, they can co-exist)

It's been a couple of years since I tried modern 6SN7s, but they were not good at that time.

Does your amp use sand or tube diodes?

Is it "amp", as in stereo, ar "amps", as in mono?

Best regards,
Paul S
12-26-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 78
Post ID: 9274
Reply to: 9272
Sun Audio SV-2A3
fiogf49gjkf0d

I kind of disagree with Adrian. The wire, the coupling caps, the cathode resistors and many other things are superbly important but it is after the strategic topology is settled. In my view caps, resistor, wire and other things are responsible for the sounds, the minor things, the tactics. The big picture of the sound, the strategy is made by the macro topology. I properly, or I would say sonically-pretentiously, designed amp would sound strategically -properly with any, even with very poor parts and even with not the best assembling methods.

At this point I am not convinced that I will keep the topology of my experimental DH SET, there is a lot of thing that I do not like it.  This amp is Sun Audio SV-2A3. It is very straight forward and simple design.

Sun-Audio_VT-2A3_1.JPG

Sun-Audio_VT-2A3_2.JPG

Sun-Audio_VT-2A3_3.JPG

It is up and running with all default parts, which are very bad I have to say. All tubes are Sovtek, I just took a liberty to put there 3A2 from WWII. I have no good rectifiers and no good 6SN7 and I have order a pair. Still I do not wont to invest a lot of efforts to make this amps to sound better and I most like will go two stage. I have no need for 40 time gain in driver stage. I might get rid of the second stage, make some other changes, or most likely will go with my 6E5P in a driver stge.

For a time being I would like to live with this amp as is for a few days. I drive with it my Tannoy Red full range. In addition I have the channel #3 from my Super Mils is the Injection channel, or a fill range Melquiades amp. So, I might run back and forth two full range amps: 6SN7-2A3/6A3 vs. the 6E5P-1/26C33C into the same speaker. I actually did it today, it was interesting. In a few days the better tubes will came and I might try to change the DHT amp for more sane operation.

So, far the only advantage that I see in my DHT is it boutique quality…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-26-2008 Post does not mapped to Knowledge Tree
drdna
San Francisco, California
Posts 526
Joined on 10-29-2005

Post #: 79
Post ID: 9275
Reply to: 9272
6sn7-2a3
fiogf49gjkf0d
 Romy the Cat wrote:
Can you post or explain the topology of your 6SN7-2A3?
The amplifiers I use started from a kit I bought, the Moondog, so here you can see the basic topology. It is very simple. The first stage here can be eliminated, since the horn speakers are very high efficiency and the grid resistors can be eliminated by using inductors.

Paul is correct that the sound can be very dependent on the parts you are using. I would not make any judgments about the sound. I believe that your impressions are related to the quality of the parts. If you were using, for example, the Kron KR 2A3, you would not be commenting on the sluggish liquid sounds, and it would be very much more competitive with the Melquiades I am sure of it.

Adrian
12-26-2008 Post does not mapped to Knowledge Tree
drdna
San Francisco, California
Posts 526
Joined on 10-29-2005

Post #: 80
Post ID: 9276
Reply to: 9274
Topology vs parts
fiogf49gjkf0d
 Romy the Cat wrote:
The wire, the coupling caps, the cathode resistors and many other things are superbly important but it is after the strategic topology is settled. In my view caps, resistor, wire and other things are responsible for the sounds, the minor things, the tactics. The big picture of the sound, the strategy is made by the macro topology.
All these things determine how the electrons move. Both tactics and strategy are necessary to win a game of chess.
 Romy the Cat wrote:
The 2A3 it feels like heavy-sunk time of tube and it constantly run a fully submerged. It has seriousness but it does not look at this point that it has lightness.
To me I understood this to be a concern of sounds and believe it can be corrected on the parts level. I am saying this basically because it is something very similar to what I experienced with the 2A3 kit I started with, but making the changes I described eliminated the problem and gave the necessary "lightness." Adrian
12-26-2008 Post does not mapped to Knowledge Tree
mumford
Posts 10
Joined on 06-10-2008

Post #: 81
Post ID: 9277
Reply to: 9275
For a DHT amp, you are listening to the power supply
fiogf49gjkf0d
 drdna wrote:
  If you were using, for example, the Kron KR 2A3, you would not be commenting on the sluggish liquid sounds, and it would be very much more competitive with the Melquiades I am sure of it.

Adrian


I doubt swapping an output tube is going to solve your problem.  Measure the dcr of the power supply choke.  Swap it with one having lower DCR, and replace the two 47uf capacitors with ASC motor run capacitors.
12-26-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 82
Post ID: 9278
Reply to: 9274
The vintage tubes syndrome.
fiogf49gjkf0d

I always was kind of afraid of it. Any single zillion years tube I see is “NOS in box”, “measured as new” or “never work”. So, I wonder where those uses up old tubes are gone? Do people trash them or juts sell them “as new”. As many old tubes I ever bought with quoted transconductance figures never were the same after I received the tubes I am not even talking about “match tubes” what is always is a pure BS, they never matched at the necessary for me operational parameter, or gain.

It looks like that with DHT tube it is even worth. I measured the 2A3 and 6A3 that I have and they are so much off the specks what that it is not even funny. When I buy Russian 6C33C then they measure whatever they want then it is fine as they cost nothing. Those DHT tune are expensive but the same crap quality wise – very said. Looking at this I might understand Lamm who sell 6C33C for $100 per tube, assuring it compliance with specs.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-26-2008 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,570
Joined on 10-12-2006

Post #: 83
Post ID: 9279
Reply to: 9274
Parts Frenzy
fiogf49gjkf0d
At this point I feel a little stupid saying that a nice stiff rectifier can help with the speed issues.  I've had not trouble doing better than the Sovtek for rectifiers; even the old winged C Svetlana is better.  I've had the best luck overall with the later US military versions, which in this case would be the 5U4WG, I think.  I remember thinking at first that they lacked subtlty, but it turns out that they do not; they just have notably more guts, and as a bonus they are cheaper than some of the exotic stuff.

Looking at the circuit, I can see why you settled on it as a starting point.  But we might even say, the simpler the circuit, the more important the parts.

Maybe use the driver halves parallel?

Best regards,
Paul S
12-26-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 84
Post ID: 9280
Reply to: 9277
Too many new sounds
fiogf49gjkf0d

Funny, funny but those 2 47uf capacitors are the only eminent the worth to keep in this kit – they looks like very good polypropylene caps. I also a person who go uselessly go for chokes with high DCR not lover. Anyhow, I am not changing any magnetics in there. This kit is an opportunity for me to discover the necessary for me topology and I less concerned with parts at this point. Probably better tubes, better cap in cathode bias and better coupling cap is something that I might change as it will stay anyhow. The driver stage in the San-Audio is really makes me hectic – it has a gain of phonostage. Adrian was right when he got rig one stage in his kit. I would like to do the same but I did not desied if I will keep the 6SN7 of to put in there 6E5P.

I was considering to get the adaptor and to run my 6E5P

http://www.guitarcenter.com/Groove-Tube-Stubti-Tube-1-6SL7-to-12AX7-Octal-to-9-Pin-Adapter-212240-i1389751.gc

but the original tube sockets in the Sun Audio kit just horrible (the worse I even see!) and need to be replaced. If I do so them I might as well pit the 9-pin socket and close the book on 6SN7. Still, sine I have no gain the drive might be DHT as well… I do not know year and frankly I have no a lot of sense of identity how this amp sound as is.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-27-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 85
Post ID: 9289
Reply to: 9280
Milq-Sun-Audio amp, ordinary Sound, 2A3 tubes
fiogf49gjkf0d

Dealing more with Sun Audio SV-2A3 kit it amassed me how bad the kit was. The guys made very cheap, in fact I hardly believe that this company has anything to do with Japan – it looks more like K-Mart level of amplifier. I heard a number of very positive comments about Sun Audio kits, well but who heard from me that the people in audio are mostly Morons…

Anyhow, I trashed everything that comes from Sun Audio besides the chassis, transformers and power resistors. I also got rid one gain stage on 6SN7. I have no idea what they make gain without power but it is another subject. To build the Sun Audio kit took 3 hours. To rebuild if in my way with my parts took 30 min. I was listing it and I did not really like what I heard. It is not that the parts were bad or wires were not “silver enough”. It was all together juts some kind of “Ordinary Sound”.

I was not pleased and I decided to go for what I know/ I got rid of the 6SN7 and put my 6E5P with cathode bias in the driver stage. I did not like the sound as well, in fact I like it even less then with 6SN7. Then I grounded the 6E5P and put it in more Milq-like configuration. I end up with 360V on B+, 15K plate load, grounded cathode, 160V on plate and -3.5V on grid via a series battery. It was slightly better but still I did not like sound.

I recognize that I say “I do not like sound” but I can’t say anything more spastic. All of the sound that I get from it is not right. So, I figured that it is most likely I have no speaker to use with this amp. The Tannoy Red are syrupy crap and I hear nothing with them. I need just another more or less full range speaker to evaluate the way how I might be used the DHT tube to drive my MF channel. I did not drive with the new 6E5P-2A3 Milq-Sun-Audio my MF channel as I would like to make the amps its good and then to apply the presumed success of my Sun-Audio amp to my MF channel with DSET-type transformers. (Most likely it will be inner-stage transformer)

So, with absent of the right speaker I will put the Milq-Sun-Audio journey on hold. This week my mashie pals me to fins the Mini-Me speaker and it might be good for get “clean sound” out of the Milq-Sun-Audio. So, will see how the Mini-Me will turn out.

Now about the contemporary production of 2A3 . Adrian, you proposed the KR tubes as good contemporary tubes:

http://www.kraudioproducts.com/Kr/ProductDetail.aspx?CatID=13&ProductID=114

There are also the Emission Labs:

http://www.emissionlabs.com/datasheets/EML2A3-mesh.htm

and Sofia Electric

http://www.sophiaelectric.com/pages/se/2a3.htm

Did anyone have any experience with them?

The CaT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-28-2008 Post does not mapped to Knowledge Tree
drdna
San Francisco, California
Posts 526
Joined on 10-29-2005

Post #: 86
Post ID: 9291
Reply to: 9289
New tubes
fiogf49gjkf0d
 Romy the Cat wrote:
I was listing it and I did not really like what I heard. It was all together juts some kind of “Ordinary Sound”. I recognize that I say “I do not like sound” but I can’t say anything more spastic. All of the sound that I get from it is not right.
I think this 2A3 must have a specific set-up to sound its best. You have not found it yet. To begin with and familiarize yourself with the sound of it, I suggest sticking with the topology that has been tested by amplifier designers, since they have tried many configurations before releasing their design. Let them do the work for you. Get to know it before a lot of experimenting. It is like swimming in the ocean at night.

 Romy the Cat wrote:
Now about the contemporary production of 2A3 . Adrian, you proposed the KR tubes as good contemporary tubes. There are also the Emission Labs and Sofia Electric. Did anyone have any experience with them?
I built this amplifier more than ten years ago, before these other tube companies were in business. I know the Vaic tubes, which the EL tubes are related to. However, I have not tried either tube. Maybe it is a good idea (and I can always use some spares). I will order some of these tubes tomorrow, so I can compare side by side with the KR tubes. I will post the results here if anyone is interested.

Adrian
12-28-2008 Post does not mapped to Knowledge Tree
be
Copenhagen, Denmark
Posts 86
Joined on 02-12-2007

Post #: 87
Post ID: 9292
Reply to: 9289
Milq bias vs. batery bias
fiogf49gjkf0d
Hi!

Could you tell a bit about how does this:

"I end up with 360V on B+, 15K plate load, grounded cathode, 160V on plate and -3.5V on grid via a series battery."

sound as compared to the normal Milq bias?

Thanks
be
12-28-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 88
Post ID: 9293
Reply to: 9292
The batteries are a tricky thing.
fiogf49gjkf0d

 be wrote:
Could you tell a bit about how does this:

"I end up with 360V on B+, 15K plate load, grounded cathode, 160V on plate and -3.5V on grid via a series battery."

sound as compared to the normal Milq bias?

I did the following.

BateryBais.jpg

As a battery I use 3.5V Lithium single cell from computer supply. I did not build the Milq-type bias on the 2A3 amp and I can’t compare Milq vs. Battery bias on this amp. In a past, when I made the first Milq I did experiments with Milq vs. Battery. I do not remember the details already but obviously the Milq bias won. With this 6E5P-2A3 amp it looks like the Battery bias is more interesting then cathode bias. However what made me pissed is that the magnitude of details behind that “more interesting” has completely escaped me as my speakers do not handle any “fine moments”. The batteries are a tricky thing. Theoretically battery is an always charged capacitor, so in my case the signal flows via this capacitor. It would makes to compare the battery with fixed bias of non-Milq style, and perhaps a different type of batteries but I really can’t do it with my current full-range speakers.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-28-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 89
Post ID: 9294
Reply to: 9291
Swimming the ocean at night?
fiogf49gjkf0d

 drdna wrote:
I think this 2A3 must have a specific set-up to sound its best. You have not found it yet. To begin with and familiarize yourself with the sound of it, I suggest sticking with the topology that has been tested by amplifier designers, since they have tried many configurations before releasing their design. Let them do the work for you. Get to know it before a lot of experimenting. It is like swimming in the ocean at night.
I am not sure where this comment comes from. The 2A3 might need a specific set-up to sound its best but I do not violate the way how it was for years “tested by amplifier designers, since they have tried many configurations before releasing their design”. I you paid attention my 2A3 us use as it was for many years – with cathode bias and 275V in plate. I do not know what you mean by “specific set-up” and what San Audio did is very orthodox use of 2A3 and I did not change it.

The only change that I made (and I do not know at this point if it was a good change) was the change of the driver tube from 6SN7 to 6E5P. Objectively the 6E5P is way better driver then driver. In fact of you insist that I need to “sticking with the topology that has been tested by amplifier designers, since they have tried many configurations before releasing their design” then the 6E5P way more used tube then 6SN7 as a driver. The 6SN7 is used since 1940 and there were tones of amps built with it where the 6SN7 was a driver, mostly in 3 stages design. When 6E5P was “discovered” for audio use in 1999 than it would be very educational to look what Russians designer and DIYer use as driver. (I say Russians become 6E5P is very popular in there and conceded the king of the drivers). Since 1999-2000 no one use 6SN7 type tube anymore as everyone switched to 6E5P. The 6E5P is objectively ultimate 2 stage driver. It has 10 times more gain then 6SN7 (30 vs. 20 on 6SN7) it can push much more current (3.5W of max single plate dissipation on 6SN7 vs. 8.5W), has much lover plate impedance (7kOhm for 6SN7 vs. 1kOhm), and has higher bias that is very important for sources that swing a lot of voltage foe 2-stage amps. I mean objectively the 6SN7 is not even a competition for 6E5P as they are different level of drivers. Interesting that they were used for the very same purpose – vertical-deflection for TVs and oscilloscopes – it was exactly where Dima discovered it. Anyhow, I think if the 6E5P-class tube was able since WWII as 6SN7 then you would never see the 6SN7 to drive 2A3.

Saying all above I have to aphesis that I DO NOT MAKE ANY CLAIMS about sonic characteristics of 6SN7 vs. 6E5P. I know the 6E5P/6E6P very well but I never played with 6SN7. In fact it shell be a good tube and I heard a lot of good sounding devises with it. Still, as an universal driver and using the only objective data the 6SN7 is different class of driver that not even rivalry with 6E5P/6E6P. It would be interesting is somebody do sonic comparing of the 6E5P/6E6P vs… anything else indirect-heated out there.

Rgs,
The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-28-2008 Post does not mapped to Knowledge Tree
drdna
San Francisco, California
Posts 526
Joined on 10-29-2005

Post #: 90
Post ID: 9296
Reply to: 9294
New 2A3
fiogf49gjkf0d
 Romy the Cat wrote:
I do not know what you mean by “specific set-up” and what San Audio did is very orthodox use of 2A3 and I did not change it. The only change that I made (and I do not know at this point if it was a good change) was the change of the driver tube from 6SN7 to 6E5P. Objectively the 6E5P is way better driver then driver.
Yes, but you also have noted
 Romy the Cat wrote:
I was not pleased and I decided to go for what I know/ I got rid of the 6SN7 and put my 6E5P with cathode bias in the driver stage. I did not like the sound as well, in fact I like it even less then with 6SN7.
so the correct operation for 6E5P-2A3 may require some small changes. I only suggest that you sit with the 2A3 for some time to get used to the sound and allow the amplifier to break in. It was just soldered together after all!

Adrian
12-29-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 91
Post ID: 9300
Reply to: 9289
To kill of do not kill the capacitor.
fiogf49gjkf0d

I am taking about coupling capacitor between driver tube and the DHT. There are zillion way to do it and no one said that they need to be used. No one proved yet that a very good quality of caps shell be worse than other methods. In my case since the amp will be ultimately only HF it might use any coupling with equal success.

Since I might keep with 2A3 a very high grid resistor then I might use a very little cap. Furthermore if I want I might use the coupling cap as the high-path filter for my MF channel (it is 3200Hz electrical and 1000Hz acoustical). If so then the cap would be in nF level and it might be some kind of crazy expensive cupper in Teflon for instance… or even air. With 250K on 2A3 grid we arrive to 0.00018uf... what is 180pF – very much the capacitance that air cap can handle if they will be able to care the couponing voltage. I am a bit suspicion with this approach as in the past what I was wring the DSET curve with coupling capacitor in Mild I was not able to get my MF to sound right. I do not know what the reason was.

Alternately, since my driver stage has a very good RL filter in it’s grid and all the rest MF amps will run no bass I might use galvanic coupling. The problem with transformers is also bandwidth and phase distortion but in my care it might not be the factor (the beauty of DSET topology). Since my MF amp will not care LF the intestate transformer might have no inductance and to have as few tune as it need to do the coupling. I have ordered a very fast 1H transformer with 80% nickel core, 50ma gap, that shell theoretically run TV signal. OK, I am kidding about TV but it will have no phase problems under 100K. The transformer is made by a quite knowledgeable person, so it might be very interesting.

Probably I shell give a try to one of the direct-coupling versions. If I have higher voltage in super Milq then 400V then I might try the Jack Elliano’s idea of reactance coupling.

http://www.electra-print.com/2a3drd.php

Still, my leading at this point are air cap or a small and very none-inductive transformer that at HF shell be as good as a straight wire.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-30-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 92
Post ID: 9303
Reply to: 9296
The JJ Electronic amp.
fiogf49gjkf0d

This is the idea that I like. It looks like it is a Slovakian company and this amps is two stage with a reasonable driver and it looks like they make their own 2A3.

http://www.jj-electronic.com/index.php?option=com_content&task=view&id=2&Itemid=31

I have no idea how it sounds. I their des description the target this mps for WLM, Lowther, Fostex, Cabasse, Loth-X users, that pertly makes me to want vomit. I do not know also about 10W from a single 2A3. I do not feel good about DC voltage for heater supplies. There is something “white-flagish” in DC in out tube.  Still, I welcome the des that has no extra stages… I wonder how the JJ Electronic in the pantheon of new production of the 2A3 tubes?

Is something brewing in the former Czechoslovakia? The whole country is the size of a half of New Jersey but they have 3 manufactures that do “objectionable” tube today. Is it the same rebranded group of people behind of all of them?

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-30-2008 Post does not mapped to Knowledge Tree
JJ Triode
Posts 99
Joined on 09-12-2007

Post #: 93
Post ID: 9306
Reply to: 9303
JJ 2A3 and amp
fiogf49gjkf0d
Romy, don't be so sure the amp is 2-stage. The ECC99 is a twin triode (mu=22, Rp around 2k) so the two sections could be cascaded, paralleled or the second section used as a CF or several other possible topologies.

Their 2A3 is rated up to 40W plate dissipation so 10W is quite possible (without even going much in A2). It is said to be a good tube, I have not used it yet.

I think Vaic/EML, KR and JJ share some roots but have gone their separate ways. Also, I think the JJ factory is actually in Slovakia.
01-01-2009 Post mapped to one branch of Knowledge Tree
drdna
San Francisco, California
Posts 526
Joined on 10-29-2005

Post #: 94
Post ID: 9321
Reply to: 9303
Czech tubes
fiogf49gjkf0d
 Romy the Cat wrote:
Is something brewing in the former Czechoslovakia? The whole country is the size of a half of New Jersey but they have 3 manufactures that do “objectionable” tube today. Is it the same rebranded group of people behind of all of them?
For those who do not know, Riccardo Kron and Alessa Vaic went into business to make tubes, this was the original Vaic company. They parted ways, and the designer, Vaic, formed the AVVT company. Meanwhile Kron formed the KR company and they both made similar tubes. Vaic, and later his other business partners, outsourced tube manufacture to the Slovakian Tesla factory, who also began to market the tubes under the JJ brand.

Are they all the same tubes? Not exactly, but honestly they are all quite similar. The KR tubes are the most robustly built and in my opinion have a clarity and focus to the sound that the others lack.

However all the 2A3 tubes are much better that the Chinese made tubes, which sound by comparison like a cat stuck in the mud howling.

I will soon be getting some new tubes which Romy pointed out and let you know how theses sound as well.

Adrian
01-01-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 95
Post ID: 9322
Reply to: 9321
Single plated vs Double plated?
fiogf49gjkf0d

Adrian,

Are any of those new tubes besides the Chinese tubes are single plated?  I have bought some very nice 2A3 and 6A3 double plated from 1942 and 1944 and it will give me an ability to see what is going on with vintage tubes.

2A3_Old.jpg

I was not pleased with advertised vs. actual measurement of those tubes, even those the tubes I got were “new”. The most interest probably shell be belong the single plated tubes but they are very pricy, more expensive then the new production of the tubes. The good part is that with the new production it is possible to have assured and stable measurement of the tubes and the only concern would be this one:

http://www.goodsoundclub.com/Forums/ShowPost.aspx?postID=9301#9301

There is something else.  If you look at the Srajan Ebaen’s pictures:

http://6moons.com/audioreviews/jj2a3/40.html

then you will see something that really makes me conserved. Srajan shoots it for the same of sexy look and he does not understand it but is anything in there that make you nervous? Look at the second image from the bottom where the amp is shot in dark. The blue light radiated from the sake around the filaments is OK in DHT. If the covers around cathodes have some hole then the projection of the whole to the glass might also pick up some blue light – that is normal as well. However if the whole balloon on the perimeter of the glass turns bleu then it is a very high evidence that the tube is filled with crap gas and shell be conceded faulty.  If I paid money for the blue aura tube I would return it and would ask for refund.

BTW, what you will be commenting on your new tubes then can you for me to  pay less attention to their bass and more pay attention to  texture and tone in the upper region?

The CaT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-01-2009 Post does not mapped to Knowledge Tree
drdna
San Francisco, California
Posts 526
Joined on 10-29-2005

Post #: 96
Post ID: 9323
Reply to: 9322
Mono plate 2A3 tubes
fiogf49gjkf0d
 Romy the Cat wrote:
Are any of those new tubes besides the Chinese tubes are single plated?
I believe they are all single plated.

 Romy the Cat wrote:
I have bought some very nice 2A3 and 6A3 double plated from 1942 and 1944 and it will give me an ability to see what is going on with vintage tubes.
Appear to be some nice double filament tubes. My recollection of the RCA was a very nice smooth midrange but lacking a bit of the sparkle and life you referred to. However, not the color-drained-out lifelessness of the Chinese tubes. Tung Sol I tried the 2A3 and found it to be very close to RCA, very musical and enjoyable "tube" sound, Koetsu-like in a certain way.

Adrian
01-02-2009 Post does not mapped to Knowledge Tree
Wojtek
Pinckney (MI), United States
Posts 178
Joined on 09-01-2005

Post #: 97
Post ID: 9325
Reply to: 9323
I suggested once VT52 tube
fiogf49gjkf0d

I assembled SUN 2A3 amp for my friend and found it to be quality kit  and very easy assemble. Kit was old .I think late 90's so maybe quality deteriorated since then. I have variety of 300b Czech tubes and (Eml 300b , KR 300BLX 842VHD ) bought them to build 300b Melquiades but compression drivers buing frenzy is draining all modest resources I have. Lstening to those tubes I have to agree with Adrian assesment . The thing which attracted me to them was AA tube guys opinion that they sound solid state . They expressed the same opinion about6C33C so I fthght that this DHT will fit in the schema of things.
Back to topic I found VT52 to be the best sounding tube, harmonically rich, dimmensional with full seductive midrange withouto little histerical qualities of tubes like 45, 6A3 . In Sun kit it sounded considerably better (to me ) with simple DC 6.3V filament than 6A3 and 45 amp .

01-02-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 98
Post ID: 9326
Reply to: 9325
The 800R vs. 1800R vs. 5500R
fiogf49gjkf0d

 Wojtek wrote:

I assembled SUN 2A3 amp for my friend and found it to be quality kit  and very easy assemble. Kit was old .I think late 90's so maybe quality deteriorated since then. I have variety of 300b Czech tubes and (Eml 300b , KR 300BLX 842VHD ) bought them to build 300b Melquiades but compression drivers buing frenzy is draining all modest resources I have. Lstening to those tubes I have to agree with Adrian assesment . The thing which attracted me to them was AA tube guys opinion that they sound solid state . They expressed the same opinion about6C33C so I fthght that this DHT will fit in the schema of things.
Back to topic I found VT52 to be the best sounding tube, harmonically rich, dimmensional with full seductive midrange withouto little histerical qualities of tubes like 45, 6A3 . In Sun kit it sounded considerably better (to me ) with simple DC 6.3V filament than 6A3 and 45 amp .

At this point I do not particularly case about the out tube. Milq has 200V supply and 400V supply, so I will able to accommodate whatever I want. I more concern about driver as I would like to have assurance that the Milq’s drive will be Ok to drive DHT sound-wise.

About the out tubes I have a strong bias to 6.3 as Milq has already a very good a 14A supply for ½ 6C33S and to hook up one more amp for something like 6A3 will be very easy and comfortable. To be persevered I have order a transformer with 6.3 primaries and multiple secondarys:  2.5V, 5V, 7.5V. Still I would like do not have any AC transformers in the Milq chassis. People usually do not like 6A3 and any high voltage DHT time as they are too loud with AC supplies. However, in my case the amp will be DSET, high-passed at 3.2kHz, and I do not think that it will be a problem with noise at all. I did not feel that any modulation would be a problem as well. I might stay with 2.5V if the 2A3 turn out to be better than 6A3, I do not know at this point.

There are 3 basic groups of those tubes as I see them. First one has plate of sub 1000R: 2A3/6A3, AD1 and many others. The second has plate between 1500R and 2000R: 45, VT52 and many others. And the third one has plate above 5K: 10, VT25 and many others. Each groups need own transformer, I have a few for the first gas and none for the last groups. I personally would like to use something like 10Y and with my DSET setting it would not be a problem to wide a high-ratio transformer.  So, if I go for none-2A3 solution then it would be most likely not the second group but the third one. It is possible that the first group will be enough for me, of even that my single-stage high-mu IDHT will do just fine in the end. I will see how the Sun Audio kit will behave with MiniMe and will go from there. The MiniMe shell have a very upper range and if it was the case then it will decide the thing…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-05-2009 Post mapped to one branch of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 99
Post ID: 9344
Reply to: 8932
YO-186 as the output tube.
fiogf49gjkf0d

In the thread GM70 vs. 6C33C two year back I have written that the only tube that I would like to trey in Milq besides 6C33C would be YO-186.

I am not sure that it might be a right direction or even interesting direction but I picked yesterday a party of YO-186 tubes. The YO-186 is incredibly rare Russian tube and has a mysterious reputation in there. It is so uncommon that it has a unicorn status and trios few who use pray to YO-186 as it is something out of this world. I do not know if there is any rational in it. Russians might be right and the YO-186 might be a unique sounding tube, it might be in a pair with western equivalents or it might be worst then western alternatives. I took the YO-186 just to address its unicorn status and to see if any merit exists behind the YO-186 cult sonic reputation. I have very limited expectation as it looks Russians made YO-186 as an alternative to Western tubes. Generally those alternative tubes were not as good as Western tubes. The Russians own tubes development was much more interesting where they did not try to imitate any and created own things from scratch… talking about the 6E5P, 6C33C, 1P24B…

Anyhow, the YO-186 was a Russian made hybrid between AD1, AD101 and 45 tubes. The YO-186 is like AD1 has 4V and 1A filament. Cares 250V on plate, can do higher of necessary. Default plate current 60mA, bios of minus 40V, 15W anode dissipation. It has lover gain then AD1 – 4 vs. 6 and has slightly higher plate impedance - 1200R,  that brings it in the camp of 45 tubes. The YO-186 started production in mid of 30s and were made to the beginning of 60s. The primary use of them was reportedly in movie theater amplifiers even though I have no idea what the purpose was to have 1.5W tube in there.

If anyone heard any amp with this tube then let me know. I know that there is a South Korean company that makes rare amps with YO-186 but I do not know anyone who has it.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-06-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 100
Post ID: 9359
Reply to: 9344
Here she is.
fiogf49gjkf0d
http://www.goodsoundclub.com/pdf/YO-186.pdf

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 4 of 16 (398 items) Select Pages:  « First ... « 2 3 4 5 6 » ... Last »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  DHT driver & input..  Effects of radiation...  Melquiades Amplifier  Forum     25  237803  02-01-2007
  »  New  The one-stage Melquiades...  It's time, what amorphous opt...  Melquiades Amplifier  Forum     74  654916  04-21-2007
  »  New  The single-stage Milq and power Supplies...  Just the tank...  Melquiades Amplifier  Forum     10  95682  05-03-2007
  »  New  The 6E5P tube data...  Bartola Valves: 6e5p beam tetrode SPICE model...  Melquiades Amplifier  Forum     44  463867  07-23-2007
  »  New  6 Channel Version of Super Melquiades..  The first Milq screw up....  Melquiades Amplifier  Forum     131  1202736  08-08-2007
  »  New  My (Amplification + Acoustic System): what is next?..  Macondo and Melquiades in the NEW room....  Audio Discussions  Forum     41  301281  01-10-2008
  »  New  Incorporating active crossovers into DSET..  Thanks...  Melquiades Amplifier  Forum     2  43991  07-22-2008
  »  New  About the life-expectancy of the new production tubes...  Stressing the damn contemporary tubes....  Audio Discussions  Forum     9  89600  12-29-2008
  »  New  Small SET’s bass, besides everything- is it about power..  Importance of OPT and type of tube for SET amp bass per...  Audio Discussions  Forum     4  82724  01-12-2009
  »  New  Macondo: new horizons. A few thoughts in context Zander..  What does make a playback to stop?...  Playback Listening  Forum     9  72238  02-02-2009
  »  New  The period DHT tubes and Swastika..  Maybe there is another solution...  Melquiades Amplifier  Forum     1  27264  04-30-2009
  »  New  Some thoughts about Milq’s MF filter..  High-Pass RL Filter calculator....  Melquiades Amplifier  Forum     2  33396  05-02-2009
  »  New  The DHOFT topology? Do not try it home...  A medley of slow-cooked triodes....  Melquiades Amplifier  Forum     3  46631  05-04-2009
  »  New  Why the tubes shall be the same?..  Not optional anymore?...  Melquiades Amplifier  Forum     7  61913  05-11-2009
  »  New  Valve Technology Timeline..  A good video about tubes making....  Audio Discussions  Forum     5  95305  06-18-2006
  »  New  The DSET perspective examines the Herb Reichert article..  Are you still in Reutlingen, Germany?...  Melquiades Amplifier  Forum     5  93872  07-01-2009
  »  New  About the Critical Audio Tune ™..  “Critical Audio Tune” bay-leave in the soup......  Playback Listening  Forum     5  50593  08-29-2009
  »  New  A full-range quality-triode? Does Size mater?..  A full-range quality-triode? Does Size mater?...  Melquiades Amplifier  Forum     0  16917  12-02-2009
  »  New  About Stupid Dynamic..  Misplaced dynamics....  Playback Listening  Forum     1  20944  08-21-2011
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts