| Search | Login/Register
   Home » Horn-Loaded Speakers» Etheraudio's some BS…. (5 posts, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (5 items) Select Pages: 
12-03-2014 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 1
Post ID: 21366
Reply to: 21366
Etheraudio's some BS….
fiogf49gjkf0d
Well, they do make an amp around GM100 and that is not bad.
 
http://www.etheraudio.net/abbssolute-intuition-by-etheraudio/
 
They get out of it GM100 30W. Well, if they get 30W out of GM100 then they use it at very low voltage and they drive it in GM70/211/845 mode. This tube is 1/2A at 2kW, with 1000W plate dissipation you need to be creasy to take out of it 30W. What those guys did was underpowered the tube and light the filaments up with the whole 18A of current to make a good internet photography.
 
No less criticism in my view deserve the "Music Friendly Concept"
 
http://www.etheraudio.net/music-friendly-concept/
 
The 10 kg for each component? Really? Anyhow, the most ridicules of all is "Real Full Range Driver in Horn Loaded Loudspeaker Enclosure" The stressing of the world "Real" is particularly funny. The truth is that "Real Full Range Driver" is a oxymoron with Horn Loaded Loudspeaker Enclosure, it is like saying "very saturated colors accommodated to a perception of truly blind man"
 
Rgs, the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-03-2014 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,571
Joined on 10-12-2006

Post #: 2
Post ID: 21367
Reply to: 21366
10kg of ?
fiogf49gjkf0d
Their own graph shows their "perfect" driver has a 20 dB peak starting at 4.5kH. Can their horn fix this? Their ideas are expressed in an "audio society" way, which usually means poor results that are worshipped for their origins. As ever, it will be the user that does or does not get the best results.


Paul S.
12-04-2014 Post does not mapped to Knowledge Tree
rowuk


Germany
Posts 438
Joined on 07-05-2012

Post #: 3
Post ID: 21368
Reply to: 21366
Amp has more real estate than the speakers
fiogf49gjkf0d
It of course is hard to say anything about the midrange without hearing the speaker. LF and HF are surely standard yellow cone.
It is cold in Germany this time of year. A GM100 amp would be an inefficient but beautiful heater in the 20 square meter room that the speakers were designed for............... I wonder about microphonics with those tubes and undamped glass surfaces..........
Full Range is in fact what the speaker does - creates pressure full range (well 40-20Khz anyway). With a QTS of over .6, it seems predestined for open back designs. I wonder how they do that with such a light cone. Extremely weak magnet?


Whenever I feel blue, I start breathing again.
12-04-2014 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,571
Joined on 10-12-2006

Post #: 4
Post ID: 21369
Reply to: 21368
Useful Range of Small Yellow Driver
fiogf49gjkf0d
Rowuk, drivers like this are typically overhung, with strong magnets. Some, like the Reps, have very narrow "focused" gaps. With a light cone of the smalli-ish diameter of the driver they show, this might be acceptable down to a 5-600 Hz X/O. The way the whizzer is configured, however, it almost guarantees the sort of wild dips and peaks that their own chart depicts, as the driver "interferes with itself". This driver cannot do quality-consistent lower mids without help, let alone LF. Pip-squeak drivers in backhorns... well, we've all heard them, and everyone makes up his own mind on the subject. As for OB, this might work over a limited range if the whizzer were removed. I think any X/O at 5-600 Hz would have to be 6 dB, between VERY similar drivers. The proof is in the results, of course, not in the theories , nor in the history, nor in the list of "features".

Are they asking 322k Euros for the amps? That's enough money to get out of town, if nothing else...


Paul S
12-04-2014 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 5
Post ID: 21371
Reply to: 21366
The tube in a way goes not matter.
fiogf49gjkf0d
Well, I would like to point out that the guys who made the amp about said absolutely nothing about the amp besides that fact that it uses GM100. The GM100 needs at least 10W to drive grid and how those 10W made I think would describe more the sound of the amp then the presence of the monster tube at output, particularly knowing that with 30W we know that tube severely underpowered.
 
Anyhow, the selection of "large" and "photogenic for Morons" GM100 was kind of strange, particularly if they went "over 100 of GM-70s" to make one working. GU80/81 are sub 1000V tubes and they perfectly give 100W with low output impedance.
 
Anyhow, I personally do not see any need for powerful tube SET amps unless you need LF. The MF drivers could be drive by a few watt amps and power you need only for bass. The Etheraudio folks do not use any "serious" bass, so their parley into 1000W tubes I find juts an attempt to scream that they exist rather than some kind of engineering or sonic exploration.


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 1 of 1 (5 items) Select Pages: 
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts