| Search | Login/Register
   Home » Audio For Dummies ™ » Electrovoice t350 repair for this dummy..... (1 post, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (1 items) Select Pages: 
09-03-2014 Post does not mapped to Knowledge Tree
beng
Posts 1
Joined on 09-03-2014

Post #: 1
Post ID: 21193
Reply to: 21193
Electrovoice t350 repair for this dummy.....
fiogf49gjkf0d
 
     Hi all,
 
                I have a t350 horn that I recently got out of an old cabinet at a junk shop which does not work. If I connect it to my Marantz 1030 amp it will only play very faintly as if you are listening to cheap earphones laying on the floor several feet away. I put a radio-shack multi-meter across the terminals and it looks to be open.
 
                 I have another 828 horn, which looks like a motorcycle exhaust, out of the same cabinet and it will play much louder on the same amp. Also with lot I got a x336 three-way crossover, which seem to pass signals but I certainly do not know how to open it up or test it.

                Is the t350 repairable at home by someone with good mechanical ability and average soldering skills? I was wondering if I could take it apart and maybe look inside for a bad connection that might be soldered up or repaired somehow. I really do not have anything to lose if it does not work anyway.
 
                Also I was wondering if the x336 crossover comes apart somehow or if it is a permanently assembled unit.
Page 1 of 1 (1 items) Select Pages: 
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts