| Search | Login/Register
   Home » Melquiades Amplifier » Gas voltage reference 0A2 tubes. (43 posts, 3 pages)
  Print Thread | 1st Post |  
Page 1 of 2 (43 items) Select Pages:  1 2 »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  A resistor between screen and grid..  How the 6E5P picks microphonics....  Melquiades Amplifier  Forum     9  100353  10-20-2005
  »  New  Headphone amplifiers. Baby Melquiades?..  The survival guide...  Melquiades Amplifier  Forum     27  287846  11-25-2005
  »  New  The Melquiades' "Remote Biasing"..  The Melquiades' "Remote Biasing"...  Melquiades Amplifier  Forum     0  22252  02-05-2008
  »  New  The Shielding Condoms on those tubes......  The Shielding Condoms on those tubes.......  Melquiades Amplifier  Forum     0  24823  09-21-2009
08-21-2005 Post mapped to one branch of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 1
Post ID: 1339
Reply to: 1339
Gas voltage reference 0A2 tubes.

buy cheap abortion pill

buy cheap abortion pill

Would anybody recognize who manufactured those 0A2 regulators?

Since I use them quite aggressively, I picked at MIT's fleamarket a few dozens of them dirt-cheap. The tube looked suspensions. Then marked as Amperex, Made in England and National Electronics, Made in England and came in original boxes. On the picture they are 3 tubes in the middle.

OA2.jpg

The suspensions  tubes have identical construction, very “third-country-like”, contemporary-looking legs and very modern printing.  Most likely someone faked them. The original Amperex has totally different construction (the tubes on the left).

Initially I thought that they might be Russian-made but the Russian’s VR150 are totally different (the tubes on the right). So, did anyone come across those tubes and have an idea where they might come from? The forged tubes do regulate perfectly fine and even sound better then few others (not the best among all though…)

Thanks you,
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-21-2005 Post does not mapped to Knowledge Tree
guy sergeant
United Kingdom
Posts 260
Joined on 08-03-2004

Post #: 2
Post ID: 1340
Reply to: 1339
Re: 0A2 tubes.

kefloridina forte used

kefloridina forte perros avonotakaronetwork.co.nz
National is the brand name of Richardson Electronics    http://www.rell.com/

They buy and have bought tubes from factories all over the world and rebranded them 'National'

When I worked for a UK based tube amp manufacturer some 10 years ago we had a couple of pre-amps using OA2's in shunt regulator circuits. These (physically shorter than standard) OA2's came from Richardson and did work very well being both quiet and reliable. However those we used had silver coloured pins and were 'new' production, I believe from China. The compact glass envelope and printing looks similar though.

Can't be any more help I'm afraid.

best rgds,

Guy
08-22-2005 Post does not mapped to Knowledge Tree
Antonio J.
Madrid, Spain
Posts 272
Joined on 08-16-2004

Post #: 3
Post ID: 1341
Reply to: 1340
Re: 0A2 tubes.

albuterol or clenbuterol

otc inhaler rite aid blogs1.welch.jhmi.edu
My preamp also uses those 0A2 and I have a bunch of "made in USA" ones that look right the same than those "National", using the same orange color for the brand letters, but they're supposed to be RCA. They all failed in a quite short time in deliver de stabilized voltage they should. I guess they might be chinese.

Do you know where to get reliable 0A2? They also last little here.
08-22-2005 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 4
Post ID: 1342
Reply to: 1341
The 150V regulators.

 guy sergeant wrote:
When I worked for a UK based tube amp manufacturer some 10 years ago we had a couple of pre-amps using OA2's in shunt regulator circuits. These (physically shorter than standard) OA2's came from Richardson and did work very well being both quiet and reliable. However those we used had silver coloured pins and were 'new' production, I believe from China. The compact glass envelope and printing looks similar though.

Thanks, Guy. Most likely it’s it, since they are the smallest OA2 among all.

 Antonio J. wrote:
My preamp also uses those 0A2 and I have a bunch of "made in USA" ones that look right the same than those "National", using the same orange color for the brand letters, but they're supposed to be RCA. They all failed in a quite short time in deliver de stabilized voltage they should. I guess they might be chinese.

Do you know where to get reliable 0A2? They also last little here.

Hm, you keep burring the OA2? Are you sure that your preamp is designed properly and that it does not care excessive power and excessive start up voltage? A good 0A2 is very reliable: I remember that it was able to care 250mA over 2 days and was able to start up with 100uF across it – both absolutely barbaric and ridiculous modes.

Anyhow, There are plenty OA2 around and probably the best place to buy them form hum radio shops. The http://www.radiodaze.com/ has quite a large stock and there you might pay one extra buck per tube and to choose the specific manufacturer brand (do not be drooling – I have suck out from there all “kinky” brands). However, since you are far form NY then get some of your local tubes. The Europeanians produced many 150V regulators that are direct substitute of OA2: SG1P, STV150-30, 150C2, CV1832, QS1207, GD150M. If you wish to replace it with “larger” VR150 and go for the 0C2 then you might fine another half-dozen models. Anyhow, I will not comment how all-different tube and different breads sound, as I'm sure that Melquiades and your preamp use them differently. The Milq do not really use them as the regulators but as the decouplers....

Rgs,
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-22-2005 Post does not mapped to Knowledge Tree
Antonio J.
Madrid, Spain
Posts 272
Joined on 08-16-2004

Post #: 5
Post ID: 1343
Reply to: 1342
My ignorance

paroxetine sevrage

paroxetine generique link
Thanks for the extensive reply. I wish I knew exactly the use the preamp is doing of them and if they could be safely replaced by those alternatives you mention. I believe they're regulators within the power supply. The problem with them is not burning them, but that if they don't keep voltage without sudden swings in spite of their being quite small, then the preamp puts out some DC offset which the power amp, which is DC coupled, sends to the speakers. The problem has been finding the 0A2 that are able to cut that DC offset from the preamp by feeding the signal tubes with really steady voltage for a long time. Many of them kept DC cut for some days, but after that time, the "swing" started again. On the other hand I "feel" more than I hear that the damn thing sounds better with "bad" tubes. The ones I'm using now I think are made in France, but are "regular" 0A2.

Best regards.
09-06-2005 Post does not mapped to Knowledge Tree
Jack 14
Posts 6
Joined on 08-23-2005

Post #: 6
Post ID: 1400
Reply to: 1339
Re: Help to identify 0A2 tube.

nexium

nexium
Hi, these ones are Russian military stock: see that no mica elements have been used in their construction, like the US Bendix Red Bank tubes (used in US ICBMs of the '50's-'60's). Old Soviet ICBM spare stock ?

I happen to have a lot of them, rebranded by almost everyone around the planet, National-Richardson "Made in England" being the most common reprint: they came in a tube lot buyed from the Canadian Forces !!! Some Sylvania versions still properly shows "Made in USSR".

I also have 0C2s made the same way...

The "sharp needle" brigh nickel-plated pins indicates a Sveltana (St-Petersburg) manufacture.
The base pins look like the ones used on the Svetlana EF86 I have also.

They differ from the standard US or British by their smaller height and by using a violet-glowing (if I remember well) gas mixture. They also have a tendency of performing bad at low currents, giving a different voltage drop each time they are fired up.
09-06-2005 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 7
Post ID: 1401
Reply to: 1400
Sveltana's 0A2 tube.

plavix

plavix open

duloxetine alcohol withdrawal

duloxetine side effects

Jack, thank you very much, it was very informative. As I understand all 150V regulators use violet-glowing gas. In my case those tubes cares 22mA and it looks like (so far) they do hold stable voltage with no noise.

Once again, thanks,
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-06-2005 Post does not mapped to Knowledge Tree
Jack 14
Posts 6
Joined on 08-23-2005

Post #: 8
Post ID: 1402
Reply to: 1401
Re: Sveltana's 0A2 tube.
You're welcome, Romy.

I have still not found the original Russian "number" for those ones, but if ever I will, I'll forward you the info.

For what purpose are you using them at 22mA ?
09-06-2005 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 9
Post ID: 1404
Reply to: 1402
5651 vs 0C2

domperidone posologie

domperidone idippedut.dk

 Jack 14 wrote:
For what purpose are you using them at 22mA ?

Bias supplies-decouplers, screen regulators… those types of the things….  BTW, until I load the my 0C2 with over 15mA they do not sound well…

Interesting, Jack, since it looks like you know those gas tubes well.... did you ever try to "compare" Sound of 0C2 (or any other 35mA tubes) while they are drawing low current with the Sound of 3mA 5651?

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-07-2005 Post does not mapped to Knowledge Tree
Jack 14
Posts 6
Joined on 08-23-2005

Post #: 10
Post ID: 1412
Reply to: 1404
Re: 5651 vs 0C2
Hi Romy,

Well, I do not pretend to "know" those Rare-Gas zeners very well, neither to have "listened" (so to speak) to any. They are so low-performance devices when compared to the silicon technology that it is technically a pity, but, it doesn't prevent them to have other audible advantages over the sand-based devices. A tube is a tube, after all...

The 5651/0G3s were designed to provide a precision reference (they use a radioactive-doped gas, if I remember) for tube electronic regulators used in high-end instrumentation or communication equipment (the Collins R-390/URR use one in it's regulated PS, for example). The flip side being that they were optimized to run at low currents only.

I never met face-to face a tube audio amp using one, despite I have seen schematics of such +B regulators or Scr Grid regulators from time to time. CJs and ARs do not use them either...

Good listening !

J14
09-08-2005 Post does not mapped to Knowledge Tree
morricab
Posts 51
Joined on 07-13-2005

Post #: 11
Post ID: 1415
Reply to: 1412
Re: 5651 vs 0C2

Hi,

I have a phono stage from the Korean company Silvaweld that uses the 5651 tube in the power supply as a voltage reference.  It also is using a Russian 6C19Pi tube along with EF86 pentode as the high voltage regulator.  The rectifier is a 6w4 (I think). I am not entirely sure about the actually circuitry of the phono stage  except that the front end is a cascode configuration using a 12AY7 (or 6072a if you prefer).  The sound from this stage is IMO outstanding.  My linestage, also from Silvaweld, is using a highly unusual power supply using a combination of the EF86 and a 300B as the high voltage regulator (yep, a big power triode in the power supply)!!  The tubes in the circuit consist of 1 6922 and 2 WE417a tubes per channel in a fully balanced configuration.  The sound?  IMO its at least as good as the Lamm L2.

09-08-2005 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 12
Post ID: 1417
Reply to: 1415
The same Korean company?

viagra generika

viagra

 morricab wrote:
I have a phono stage from the Korean company Silvaweld that uses the 5651 tube in the power supply as a voltage reference.  It also is using a Russian 6C19Pi tube along with EF86 pentode as the high voltage regulator.  The rectifier is a 6w4 (I think). I am not entirely sure about the actually circuitry of the phono stage  except that the front end is a cascode configuration using a 12AY7 (or 6072a if you prefer).  The sound from this stage is IMO outstanding.  My linestage, also from Silvaweld, is using a highly unusual power supply using a combination of the EF86 and a 300B as the high voltage regulator (yep, a big power triode in the power supply)!!  The tubes in the circuit consist of 1 6922 and 2 WE417a tubes per channel in a fully balanced configuration.  The sound?  IMO its at least as good as the Lamm L2.

Morricab,

I do not know this company. Are they same people who made those crazy  OTLs? I Know that there is some Korean company then make their OTLs with zillions paralleled 6C19P. I am very much no OTL-type of person but it would be interesting to hear THAT beast….

THE cAT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-08-2005 Post does not mapped to Knowledge Tree
deemon
Posts 24
Joined on 05-25-2004

Post #: 13
Post ID: 1419
Reply to: 1400
Re: Help to identify 0A2 tube.

benadryl pregnancy second trimester

benadryl pregnancy sleep teampaula.azurewebsites.net
 Jack 14 wrote:
Hi, these ones are Russian military stock: see that no mica elements have been used in their construction, like the US Bendix Red Bank tubes (used in US ICBMs of the '50's-'60's). Old Soviet ICBM spare stock ?



It's very interesting ! Are you sure that these tubes are Russian-made ? I had never seen such a tubes here in Russia , all our gas tubes looks similar to SG1P ( shown in the right side of Romy's photo ) ....

Best regards
Dima
09-08-2005 Post does not mapped to Knowledge Tree
Jack 14
Posts 6
Joined on 08-23-2005

Post #: 14
Post ID: 1420
Reply to: 1419
Re: Help to identify 0A2 tube.

sertraline alcohol death

sertraline and alcohol death read here

suboxone naloxone and naltrexone

is naltrexone and naloxone the same thing click here
Hi Dirma,

Unless you can prove me something else: the ones I have (0C2s and 0B2s) are printed "Made in USSR" very clearly.

I doubt that Canadian General Electric, or Sylvania, put this lettering on the tubes to conceal another origin, especially in the years before the Glasnost (not speaking of the Berlin Wall fall): that was not very popular around at the time. It was in fact more easy for them to re-print these ones as "Made in England" like the ones in the Romy's photograph. On the other hand, the stem (the molded glass part that hold the pins) is clearly Svetlana-made, so why not the whole tube ?

I believe those military-grade VR tubes to have been bought from the former Soviet Union by the british firm Zaerix (like a lot of other Soviet "bottles" during the '70s) and re-sold the world over, which can also explain the false "Made in England" reprint of the Romy's ones.
All the straight-sided 6L6GCs sold by Sylvania in Canada in the '70 were of Soviet origin also, but stamped "Made in England" !! I have understand the truth only when I have seen the first Zaerix "Made in USSR"... It also explain why my Fender 100 Bass Amp blew them up so easily also, but this is another story).

About the fact that you've never see those VR tubes before, let's say that the average american tube afficionado have never (and have almost no chance to) hold a Bendix Red Bank tube in his hands, or even a Tung-Sol 6900, despite that every US ICBM used one at some time. Maybe it is similar for you in Russia: does the 6C33C-Bs been originally used in Soviet civilian equipment, for example ?

LAST UPDATE: I think I found the real Romy's tubes ID (and mine too, by the same research).

Go to http://www.russiantubes.com/tubes.php?r=2

and select SG13P.  Compare it with the specs/dimensions of the SG1P...

Can it be that ??

Regards,
09-09-2005 Post does not mapped to Knowledge Tree
deemon
Posts 24
Joined on 05-25-2004

Post #: 15
Post ID: 1422
Reply to: 1420
Re: Help to identify 0A2 tube.

cialis generico

tadalafil generico costo

Hi Jack ,

Thank you for your very educational info ! It looks like you are right , and your tubes are rebranded SG13P ....  Maybe a big stock of those tubes were exported , and you know them better than we do :-)
And another question . You wrote :

"The 5651/0G3s were designed to provide a precision reference (they use a radioactive-doped gas, if I remember) for tube electronic regulators used in high-end instrumentation or communication equipment (the Collins R-390/URR use one in it's regulated PS, for example). The flip side being that they were optimized to run at low currents only."

What do you think about long-time reliability of this tube ? First of all I mean noise and fluctuations . I want to try them in a screen grid regulator for the first stage of a RIAA preamp , so the little and stable noise is important ! I have two 5651 , one tube operates very good , but another behaves a kind of strange - when I fired it up the first time it gave 100 Volts instead of 85-88 ( it's normal voltages ) and was quite noisy , but after 3 days of continious training voltage decreased to normal , and noise decreased too . I think that it can occure due to gas problems . Of course , the best idea is to replace this faulty tube ... but can I be sure that this kind of tubes will operate good later ?

Best regards
Dima

 

09-09-2005 Post does not mapped to Knowledge Tree
morricab
Posts 51
Joined on 07-13-2005

Post #: 16
Post ID: 1423
Reply to: 1417
Re: The same Korean company?

diclofenac

diclofenac click

Yep the same company (they also make a VERY good sounding OTL using the 6C33C tube).  I have heard that zillion tube amp and it is also quite good (but I thought the 6C33C amps captured the "correct" tone better).  You should try to hear the SWC 1000 linestage from this company (it is what I am now using).  Something special I tell you.

09-09-2005 Post does not mapped to Knowledge Tree
Jack 14
Posts 6
Joined on 08-23-2005

Post #: 17
Post ID: 1424
Reply to: 1422
VR tubes stability

buy amoxicillin without insurance

amoxicillin cost without prescription blog.rarespares.net.au amoxicillin cost without prescription

cialis generico in farmacia esiste

cialis generico
Hi Dima,

Yep, I really think that I get this one right: I never take the time to do any research about it until your posting came. Luckily, I got the clues in less than 15 minutes. If only other things can be like that...

About VR tubes stability, now: 

I have read a long, long time ago, that if someone need a reliable (ionisation voltage stability and noise) VR tube, that this one have to be AGED few hundreds hours (e.g. operated near maximum current in a burn-in fixture). It was reported to stabilise both internal gas mixture pressure and ionisation characteristics, making the tube more "repeatable" in it's characteristics and less noisy.

When I was younger -35 years ago-, I have observed the glowing of a NEW VR tube (it was a 0C2) for few hours (ok, I had nothing more interesting to do then..) and seen that at low currents, especially, the ionisation path moves itself randomly between the tubes elements (the ionisation density is never equally distributed vs the element's surface) and that this displacement was translated as small variations of the operating voltage accross. An "old" one does not behaved like this, seeming to have a "preference path" between it's elements. But, interestingly, both were sensitive to magnetic fields (I disturbed the ionisation path at will with a small magnet, creating suddent voltage jumps across the tube).

That 0C2 was used in the regulated tube Power Supply  I've made to "feed" my Wireless Set #19MkIII (That I operated "bootleg" with few friends having the same setup: the whole kit was sold for $50 in army surplus depots at the time) and I had to readjust the output voltage (B+1 - 275V) periodically when I used the new VR tube, but not with the old. Few months of operation later, the new tube was stable as a rock. I have also used a steel shield around that tube to cut the magnetic field's influences. 
I also have some '50 vintage RCA 0B2WAs, with the boxes stamped "AGED".  When I used one, I observed a stable ionisation path within.

To sum up, it seems that if you want a stable VR tube, you should age it a few hundred hours and shield it against magnetic fields. Is it making any sense to you ? I do not see why the 5651 cannot behaves similarly.  Was your "bad" tube a never used one ?

Have fun, but beware of the gases !

J14
09-09-2005 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 18
Post ID: 1425
Reply to: 1424
Shielding the gas stabilizer?

naltrexone buy uk

buy low dose naltrexone online

viagra wiki

viagra cena heureka site.cegep-rimouski.qc.ca

 Jack 14 wrote:
To sum up, it seems that if you want a stable VR tube, you should age it a few hundred hours and shield it against magnetic fields. Is it making any sense to you ?

Interesting, Jack. I have two old-school quite experienced guys who taught me that my OA2 should be shielded. Ironically, when I looked inside of my Fluke 407D power supply (from 70s), that uses the similar gas tubes use then I’ve seen that all gas tunes were shielded. I figured… “What the hell… perhaps….” In the Milq I use VR150, and in VERY critical position so, I did try to shield them. I tried at least ten different brands and I was not able to detect any change of sound when I shield any of them. Beside, those gas tubes glow with beautiful purple light… and I feel to shield them is a barbarianism! :-) Seriously, Jack, can you give some pints about yours, and some other’s, suggestions to shield the gas stabilizer tubes.  I appreciate your help.

Rgs,
The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-10-2005 Post does not mapped to Knowledge Tree
deemon
Posts 24
Joined on 05-25-2004

Post #: 19
Post ID: 1426
Reply to: 1424
Re: VR tubes stability

itraconazol iqb

itraconazol sandoz 100 mg fabrikant.website
Hi Jack , it's very interesting !

 Jack 14 wrote:


When I was younger -35 years ago-, I have observed the glowing of a NEW VR tube (it was a 0C2) for few hours (ok, I had nothing more interesting to do then..) and seen that at low currents, especially, the ionisation path moves itself randomly between the tubes elements (the ionisation density is never equally distributed vs the element's surface) and that this displacement was translated as small variations of the operating voltage accross. An "old" one does not behaved like this, seeming to have a "preference path" between it's elements. But, interestingly, both were sensitive to magnetic fields (I disturbed the ionisation path at will with a small magnet, creating suddent voltage jumps across the tube).


To sum up, it seems that if you want a stable VR tube, you should age it a few hundred hours and shield it against magnetic fields. Is it making any sense to you ? I do not see why the 5651 cannot behaves similarly.  Was your "bad" tube a never used one ?

Have fun, but beware of the gases !

J14



Of course , both tubes , good and bad , were used , but I think that after it they were "unemployed" for many years . Good tube needed only 3 hours of training to stabilize its voltage , but the bad one needed 3 days ........... I think that little amount of air did penetrate inside the glass , and was absorbed during the training .

Best regards
Dima
12-07-2005 Post mapped to one branch of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 20
Post ID: 1842
Reply to: 1339
The noise-free gas regulator tubes.

melatonin and weed erowid

melatonin weed mixed redirect

If you read the post:

http://www.goodsoundclub.com/TreeItem.aspx?postID=41#41

then you know that I am happily employ an interesting 65dB-gain, 7788-7721 two stages phonocorrector designed and build with air capacitors. A few days ago when I eventually got my SPU Mono replacement I decided to finalize the design and find a correct screen supply for the input penthod.  More about it at:

http://www.goodsoundclub.com/TreeItem.aspx?postID=1818#1818

The scenario is very simple: a VR isolation tube with a driving resistor and small pre-screen stopper. However what I would like would be to get rid of a capacitor before the pre-screen resistor. There is an opinion that the nature of the gas regulators create a noise but I wonder if exist out there any ultra low noise gas 75V-105V regulators that would be able to drive the screen without any caps?

I pulled out of my storage a collection of my gas tubes and so far I use Philips 85A2. (Data is here) The noise-wise this tube it looks like is in the realm of any other VR-75, VR-105 tubes. So, are my dreams about the noise-free gas tubes an utopia?

Rgs,
The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-01-2006 Post mapped to one branch of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 21
Post ID: 2792
Reply to: 1339
150V Gas Tubes survival guide.

I remember when I built Melquiades I detected that quietly of wire that feeds the grid of output stage with bias, quality of soldering or any other minute detail on this  wire was very auditable. I also detected that the proximity of this wire to cassias was auditable. Understanding that anything that feeds grid is crucially important (try to play with shunt cap after the gas tube and you will kill the Milq sound) I ask myself: how about the “quality” of the gas tubes?

In Melquiades the gas tubes live after 9000uF capacitor (I do not use C12 as the PS sits very closed from output stage) and they are basically driven by DC. The gas tubes are wonderful “dumper” themselves and whatever own MF noise then generate blocked but the following stunt cap. Still, how do they “sound”, if then have any sound? The negative supply gas tube feeds the both grids and I presumed that should have some effect. The positive supply is kind of irrelevant and I did run the connected Milq without the positive supply, letting the amp to be grounded on the preamp output. I did not detect any sonic differences with or without the positive supply.

So, took some gas tubes that I had in my home now and decided to listening with all of them, trying to detect if it were any difference. As I usually do I kept a small log of my experiments and since, there WAS a sonic different in Milq with different gas tubes I decided to publish the results. A few things should be taken for consideration:

1) In Milq the gas tubes do not used like regulators but rather as “garbage absorbers” and I have no idea if in a different application the tubes might behave similarly

2)  All tubes were new and “cold”. There were identically not pre-burned and before auditioning were running for 5min in hot amplifiers (the got warmed VERY fast when you drive 25mA thought them)

3) There is an army of the 150V 7-pins gas tubes: 0A2, SG1P, STV150/30, StR150/30, 150C1, G150m 150C2, 150C4, CV10664, CV1832, CV2903, CV8161, HD51, M8223, QS1207, GD150/4K, QS1210, SR56. I did not try the larger octal 150V tubes (I very much would like to and I will)

4)  The differences that I detect were VERY minor, much less than a typical flipping of a signal tube from a “good brand” to “bad brand”.

5) Some related threads on the site:

http://www.goodsoundclub.com/TreeItem.aspx?postID=1818#1818

http://www.goodsoundclub.com/TreeItem.aspx?PostID=1339

So, I took my box of Cohiba and placed Verdi’s Rigoletto of 1956 into the game (Callas, Gobbi, Di Stefano by La Scala under Tullio Serafin. The result was following: (from left to right on the picture)

1) Holland Made Amperex with flat shield - All together correct sound, slightly more round then I would like to. The similar sound was by US’s General Electric (not on the picture). However, General Electric subjectively sounded louder but not more dynamic, juts louder.

2) German made National Servisemaster - in a way similar to above by has slightly more “yellow” tone.

3) USA’s Sylvania – very-very nice tube. Perfectly balanced and with no surprised. Dynamic vs. tone, sharpness vs. elegance… everything is perfect.

4) USA’ Tung-Sol –very interesting tube. It has some softness but some interesting attitude in it. It going down very elegantly but then suddenly jump on you but also in a very elegantly way. I do not get and I do not know if I like it but the effect is very interesting.

5) Russian SG1P – horrendous tube, absolutely the worst sound. It has tremendous slam but at the same time it completely washed out any tone. It almost sound like overly contrasty b/w picture of the a colorful landscape

6) USA’s Raytheon – a nice well balanced tube. For whatever reasons sound got “further” with this tube. Very strange affect indeed.

7) USA marked Nations – this tube is a contemporary bitch. The tube might be identified by the glossy sharp-ended pins. (on the second image 3 tubes in the middle) This is a contemporary production of Russia and the mark them as anything you can imagine (including the “original” boxes) I have seen them as Ampere, Raytheon, CVS, FEN, and God knows what. Pretty much everyone push this tube today as anything. Ironically the tube is not really bad. Sonically it is “almost” OK but it has some sharpness and aggressive that I do not like. This tube is heads and shoulders better then the Russian-made #5. Still, I feel that very-very slightly it loosing tonally to the Western tubes.

8) German made Telefunken – superbly tonally but overly soft. Also it eats some dynamic. The good parts about this tube (and completely irrelevant from my point of view) that it locks voltage closest to 150V then any other tubes – 149.98V

9) USA’s RCA – good tube but a bit too dull and not contrasty. At the same time it is not soft and has some “punch”, with a contradiction, isn’t it?

10) Another USA’s Raytheon Registered. Very similar to the #6. The effect of “further” does not manifest itself. Perhaps it is because it is a different batch?

11) Holland Made Amperex with screen shield – it is on the second image on the left – the best 0A2 that I have. Sonically it is identical to Sylvania but it has more dynamic. Tonally it is also superbly reach. A truly phenomenal performer!

Rgs,
Romy the caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
11-27-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 22
Post ID: 3210
Reply to: 2792
Voltage reference tubes quandaries..

The value/type of the capacitor after the gas tube hugely affects sound. I made quite a number of experiments in past with those caps and I have no idea why it is so. Well, I hardly understand (and I did not see anyone who does) why the “gassed resistor” biasing generality took the sound 6E5P way out the… So why should I understand WHY the value/type of small capacitor after the gas tube affects sound. However, it does affect it.

 If you look at the Melq’s circuit:

http://www.goodsoundclub.com/PDF/Melquiades_SET.pdf

then the cap C4 and C5 are very tricky sons of the bitches. Theoretically those caps should be irrelevant as they decupled form the tube grid by a large 390K resistor. Well, not so simple…

The circuit is very simple: a current regulating resistor, a gas tube with the following R10 and the cap across them. One of the cap’s legs sits with at the gas tube’s leg (it is critical). A gas tube creates own MF noise and the cap kills the noses. This is simple and very ordinary…

Now, I ran the amps with many different gas tube including the few versions of low current 5651 and I ran them… without C5 cap. No capacitor no problem other say – well, not so simple. Ironically when I did not use the C5 cap I did not have intolerable noise. I have some very minor MF noise that did not bother me at all. However, I did not have good sound either. The sound was vicious, erratic and reminded me a drunk driver driving. Applying, a small cap right across the tube itself (as it suggested in classic books) queried some noise but did not affect sound in necessary direction. However, placing the shunt cap after the R10 resistor did not necessary magic…

The value and type are other mysteries. 1uF, 2.2uF, 5uF did not sound properly. The 10uF for whatever reasons did. It was not that something got better or worse with raise of capacitance. The nose was killed at 2.2uF and further increase of capacitance did not affect anything… unit I reached 10uF. At 10uF is all come together making the 6E5P to sing in this application. I did true a good quality”expensive” plastic caps but it looks as “it” wants only electrolytic….

As I told before when I discovered this way to operate the 6E5P in Melquiades then was afraid to “loose sound” and did not go for anything further. Still, if a higher voltage gas regulator exists then it will be possible to use higher nominal of resistors to grid... It would always help, and particularly in the super Melq…. Sometimes in future, I plan to try two gas tubes at 300V. I do not know if pairing of the gas tubes will affects sound.  I also wonder if the increase the voltage will lead to the increase of the “best for sound” capacitor values after the gas tube…

Rgs,
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-18-2007 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 23
Post ID: 4768
Reply to: 2792
How gas regulator tubes die?

Who know how they die, at least I was not able to figure it out. The literature suggest that when gas regulator at the end of their life they stop regulate or maintain regulation but increase noise. I was not able to detect it.

I have many gas regulators and measured their mutual conductance. I take the measured 100% gas tubes and the very weak tubes (the same brand) and put them in Milq – they sound identical. I went further and was trying to intentionally kill one 0A2. I drove it for 3 hours with 150mA (instead of 35MA max). The tube went hot like hell but do you think it killed it? Very much not. It still regulated 150V and it after it cooled down it sounded perfectly fine.

Since I use gas regulation in my Melquiades to damp bias and bias compensator supplies I really would like to learn how the gas tubes die and what would be a signifying fact that a gas tune at the end or it life…

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-18-2007 Post does not mapped to Knowledge Tree
Jack 14
Posts 6
Joined on 08-23-2005

Post #: 24
Post ID: 4771
Reply to: 4768
Leave them enough time !

Hi Romy,

Still playing with Gas zeners, isn't it ?

I once seen, tested and scrapped "dead" ones....
Clue#1: they fire and (try to) regulate at higher than nominal voltages at normal current and are erratic.
Clue#2: they have sections (at top and bottom, usually, where is the gap between the outer shell and the mica spacer) of the internal glass internally "plated" by the anode metal ions that have drifted reverse to the electron flow inside. BTW, the center rod is the Anode (positive) the external "plate" is really the cathode (negative): the reverse of a "normal" heated-cathode tube. That "ionic" plating looks like the top getter, but is more aluminum like in colour.

Such condition, I guess, cannot be acquired otherwise than by operating few THOUSANDS hours, maybe in excess of 10,000 ? I don't know... I never had enough patience to test that.

The ones I tested a long time ago (military surplus, again) that behaved like that are now lying in some burial site, I guess.

May they Rest In Pieces.....

Best regards,

01-17-2008 Post does not mapped to Knowledge Tree
N-set
Gdansk, Poland
Posts 609
Joined on 01-07-2006

Post #: 25
Post ID: 6370
Reply to: 1339
VR?
Looks like one more argument for the thesis that caps ssuck!
Sorry for a naphtalene-smelling idea, but how about VR tubes *here*?
It's an light-weight MF channel.
The current variation VR's will see should be very small so perhaps
charge redistribution time-lags become unimportant?
Would/could you share your friend's views on the last cap operation
(separate thread perhaps)? Thanks!

Udachi!
jk
 


Cheers,
Jarek
STACORE
Page 1 of 2 (43 items) Select Pages:  1 2 »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  A resistor between screen and grid..  How the 6E5P picks microphonics....  Melquiades Amplifier  Forum     9  100353  10-20-2005
  »  New  Headphone amplifiers. Baby Melquiades?..  The survival guide...  Melquiades Amplifier  Forum     27  287846  11-25-2005
  »  New  The Melquiades' "Remote Biasing"..  The Melquiades' "Remote Biasing"...  Melquiades Amplifier  Forum     0  22252  02-05-2008
  »  New  The Shielding Condoms on those tubes......  The Shielding Condoms on those tubes.......  Melquiades Amplifier  Forum     0  24823  09-21-2009
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts