| Search | Login/Register
   Home » Horn-Loaded Speakers» Midbass Horns and Real Estate. (248 posts, 12 pages)
  Print Thread | 1st Post |  
Page 1 of 10 (248 items) Select Pages:  1 2 3 4 5 » ... Last »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  45Hz Bass Horn..  Can We Ever be Saved From Ourselves?...  Horn-Loaded Speakers Forum     23  306291  09-19-2006
  »  New  A right midbass solution for Altec 515G...  Its even possible to make my midbass......  Horn-Loaded Speakers Forum     21  189912  05-06-2007
  »  New  About bass horns by Johan Dreyer..  There are lowest bass horns and there are not lowest b...  Horn-Loaded Speakers Forum     5  91339  02-11-2008
  »  New  Barn Conversion - James' Project..  The vintage vs. contemporary compression driver....  Horn-Loaded Speakers Forum     28  353253  02-04-2007
  »  New  Chinese upperbass horn...  Some sensibility about bass reproduction...  Horn-Loaded Speakers Forum     35  359621  08-08-2005
  »  New  Eventually - a reasonable midbass horn from GOTO..  Clever DIY going on where?...  Horn-Loaded Speakers Forum     97  1160518  11-19-2007
  »  New  Magico: Robert Harley’s upperbass mouth...  Surprisingly interesting write up by Federated Mike abo...  Horn-Loaded Speakers Forum     35  322438  02-19-2006
  »  New  Jessie Dazzle Project..  Will this better to be auditable?...  Horn-Loaded Speakers Forum     172  1509260  08-03-2007
  »  New  Problems with horns: upper bass ..  Must it be about loading?...  Horn-Loaded Speakers Forum     109  1130396  03-25-2005
  »  New  Denouncing of idea of Bass Horns...  Denouncing of idea of Bass Horns....  Horn-Loaded Speakers Forum     0  25954  04-15-2008
  »  New  Horn high-sensitively around Boston..  Horn high-sensitively around Boston...  Horn-Loaded Speakers Forum     0  15104  10-29-2008
  »  New  The Macondo’s Upper Bass Channel: what is next?..  Görlich again...  Horn-Loaded Speakers Forum     30  279635  10-28-2007
  »  New  More about the EdgarHorn Bass..  More about the EdgarHorn Bass...  Horn-Loaded Speakers Forum     0  28906  01-13-2005
  »  New  Experience Music Horn Installation @ VSAC..  RCA MI-1428B vs Vitavox S2...  Horn-Loaded Speakers Forum     25  266106  05-27-2008
  »  New  A book about Loudspeakers and Rooms?..  Book review...  Horn-Loaded Speakers Forum     5  49372  08-18-2009
  »  New  How to select mid/upper bass horn drivers...  How to select mid/upper bass horn drivers....  Horn-Loaded Speakers Forum     0  24720  08-25-2009
  »  New  ... again on GOTO Unit drivers.....  GOTO installation in Lithuania....  Horn-Loaded Speakers Forum     108  1101570  08-16-2008
  »  New  Learn to listen your listening rooms..  Rooms and music-rooms...  Audio For Dummies ™  Forum     15  125618  04-05-2005
  »  New  Amplifiers heat… a real-estate solution?..  I have seen this simular concept...  Melquiades Amplifier  Forum     1  24319  09-18-2009
  »  New  I have a dream, the dream about a Chair...  A bit exaggerated to me....  Playback Listening  Forum     31  216260  10-29-2009
  »  New  8" Goto Woofer for 60Hz Horn..  It's not a Goto 8in driver...  Horn-Loaded Speakers Forum     5  84557  11-03-2008
  »  New  The Real Total Horn..  The Real Total Horn...  Horn-Loaded Speakers Forum     0  15348  01-17-2008
  »  New  My Multi-way Horns..  Faital chamber/ratio...  Horn-Loaded Speakers Forum     8  123203  11-29-2009
  »  New  The 5-ways from Germany...  Another Kid?...  Horn-Loaded Speakers Forum     38  240604  12-06-2009
  »  New  A datacenter at home and … "sound"...  Noise cancellation not likely possible...  Audio Discussions  Forum     6  47748  02-16-2010
  »  New  DSET and Cables...  DSET and Cables....  Audio Discussions  Forum     0  15518  02-23-2010
  »  New  Romy The Cat's new Listening Room..  Won't be the last time he makes that trip!...  Audio Discussions  Forum     478  2779461  03-28-2010
  »  New  An idea of “Rain Wake-Up Horn”?..  Looking Deeper into Rain Wake Up Horn...  Horn-Loaded Speakers Forum     3  32117  05-08-2010
  »  New  Macondo’s Midbass Project – the grown up time...  Vitavox 15/40...  Horn-Loaded Speakers Forum     455  2839389  05-20-2010
  »  New  Macondo’s lowest channel...  What truly are you tryin to accomplish?...  Horn-Loaded Speakers Forum     150  1343919  09-15-2010
  »  New  Superbly interesting effect: Suspended decoupled floor ..  Superbly interesting effect: Suspended decoupled floor ...  Playback Listening  Forum     0  17310  10-08-2010
  »  New  Mystery of bass horn calibration: Radiating Surface Dee..  Mystery of bass horn calibration: Radiating Surface Dee...  Horn-Loaded Speakers Forum     0  16594  02-03-2011
  »  New  Dedicated Music Room Build..  Show it....  Horn-Loaded Speakers Forum     6  58922  03-03-2011
  »  New  What are the effects of back chamber volume for mid-bas..  A ha!...  Horn-Loaded Speakers Forum     2  20950  09-27-2013
  »  New  A listening room for a domesticated Cat?..  Eventually!...  Audio Discussions  Forum     283  874843  02-04-2016
07-26-2009 Post mapped to 2 branches of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 1
Post ID: 11190
Reply to: 11190
Midbass Horns and Real Estate.
fiogf49gjkf0d

Probably not one subject among horn enthusiasts does not arouse as much fantasies as midbass horns.  This subject in one way or another was discussed at my site (look for the linked threads) but I would light look at the subject of the Midbass horns from a different perspective – from the Real Estate perspective.

First I need to define what I am taking about. I recognize 3 type of basshorns : the lowbass, midbass and upperbass.  The upperbass horns are the horns from 90-120Hz. They are characterized that they can still work from the time-aligned position with MF in near filed. The midbass horns are 40-60Hz horn. They are characterized by setting reference level of playback softness. And the last one are - the lowbass horns – sub 30Hz. They are characterized by driving the illusionary imagination of people who have little understanding of want they do – I do not believe in the lower bass horns. Also, it would be worth to mention that taking about horns I mean the properly designed horns, not the direct radiators with “wings” as most of Audio Morons ™ sell themselves as “horns”. I am taking about the situation where anechoicly the bottom knee of the horns delivered at least with 6dB by the equalization of the horn…

The reason why I decided to talk about is because I decided to move from my currant place – there is a multitude of business, social, financial and other reasons why.  I love my currant place – I live here form 12 years but it is a time to move on. BTW, if you are not an Audio Moron™ and still would like to catch in my old place what was done there and to learn “how Sound might be: in accordance to my view then you might still catch me unit I move, I promise that it will be educational. I anticipate that within a few months I will be gone from here…

Now, I do not have a place to move at this point and I purely conceptualizing what I what. Of course my audio inclinations do not dictate my requirement to my future home but they are a part of it and I obviously do consider them.  Still this thread is not about the Real Estate but about audio. There is a very-very high probability that moving in a new larger listening room I will be willing to pursue a pair of midbass horns, probably 45-50Hz. So, I am trying to conceptualize what kind horns they might be if I have no Real Estate restrictions of any kind. The more I think about it the more I feel that it is not so simple subject to think.

I need to preface saying that I most likely know about midbass horns all that you know. I also have very specific objectives:

1)      A single 15” driver  per horn
2)      7”-8” throat,  40-50Hz horn
3)      Horn is straight or with a single curve (not bend but juts a curve)
4)      Driver in time-aligned position with MF
5)      Very solid construction of each horn, preferably masonry.
6)      Both midbass horns are invisible in listening room.

So, I am looking for an inspiration what I might be and how it might be accomplished.  Feel free to propose any absurd idea – this is the place for them.

Romy_New_Home.jpg

In addition to that I most likely know about the horns what you do I most likely have see most of the horns installations out there and I have to admit that I do not like any of them. I would like to do it completely differently as I have advantage to start from Real Estate.  My current leading idea is to get a house that is called raised ranch with a large 800-900 sq feet living room. The raised ranches have basements where white trashes usually build bars. Those basements usually have 8”-9” ceilings – exactly the length of my 40-50Hz horn. So, hypothetically I might have two vertically arranged midbass hyperbolic of even conical horns with drivers sitting on the basement floor and the mouth  at the level of the living room floor, covered with the walking screens,  similar to those that we in city’s walkways above the subway holes. This is my leading idea so far but I also invasion some theoretical problem with it. So, I still am thinking and still working to purify my hypothetic design.

The best midbass I ever heard was from a corner-loaded Vitavox horn but it was an superbly accident that hardly even happen again. The most properly positioned and very well sounding midbass horn that I witness was in NH installation of Bill Gaw – it was 50Hs, time aligned very properly arranged in playback and the rest. It did not have all that I would like to have from midbass but it did not screw up sound as most of other midbass horns do and it was very good.  However, in Bill ‘s case it was a dedicated room – I do not like dedicated rooms conceptually I world like my midbass horn (if I go for it) to be very non-conspicuous in a normal living room.

So, if anyone has any inspiring ideas, what are more eleven then headphone-positioned midbass in the walls them feel free to tip me.

Cats_Window.jpg

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-26-2009 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,571
Joined on 10-12-2006

Post #: 2
Post ID: 11191
Reply to: 11190
Room to Romy
fiogf49gjkf0d
You say you want at least two giant, solid rooms (for the horns and for listening), and enough acoustic isolation to crank it up...

The only other option seems to be using SOLID walls, floors, and/or ceilings as "part of the horns"; but this still requires the sort of space and isolation that typically come at a premium in the city.

So, are we talking about the 'burbs, here?!?

Best regards,
Paul S
07-27-2009 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 3
Post ID: 11194
Reply to: 11190
Underground mid-bass horn and the inverted alternative
fiogf49gjkf0d
In considering integration of my own mid-bass horns, and how I'd ideally like to do it, I too passed by the underground, up-firing solution, and very much like this approach. I do however have a preference for inverting the concept, resulting in a down-firing, ceiling-mounted arrangement, having the mid-bass horns installed on the upper level. This approach offers the following advantages :

1) You could stick with a solid, non suspended ground floor (no basement) for the main horns and all equipment.

2) Finances permitting, you could do this in one of the Boston lofts 
         A) Industrial construction will likely have masonry walls
         B) You'd still be in the city

3) You wouldn't need any grills to walk on (no dirt or drinks spilling down onto drivers).

4) In the event of a flood/broken pipe, your drivers will stay dry.

The only disadvantage I can imagine is that you'd unlikely go with masonry construction for mid-bass horns located on an upper level, but could still go very solid if using a braced, fiber reinforced approached.

In either case (down-firing or up-firing), the mid-bass horns would be firing at an intersecting angle to the firing axis of the MF/HF horns, and could be located anywhere between the MF/HF horns and the listening point, such that drivers of all horns find themselves at exactly the same distance from the listener's ears.

Below are some images I made while thinking about all this :

Ideal_setup_01.jpg

Above : View from behind listener, at ear-level


Ideal_setup_02.jpg

Above : Mid-bass horns firing at 90° to firing axis of MF/HF horns.


Ideal_setup_03.jpg

Above : Mid-bass horns angled at 45° to firing axis of MF/HF horns.

jd*


How to short-circuit evolution: Enshrine mediocrity.
07-27-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 4
Post ID: 11195
Reply to: 11194
Midbass options to consider.
fiogf49gjkf0d

Yes, it is certain in what I proposed there is majored disadvantage of having a suspended floor. A suspended is like a bad turntable – no matter what you do you would never be able to get proper lower octave.  The idea to have horn firing from roof is fine but in most of jurisdictions I think it will be prohibitive to build such a thing above roof. I need to check about it. To hide he horn in the living space is impossible of courses but in case of basement it does not take any useful space, which is not the case of ceiling firing horn.

A good idea might be using a “J” horn from both side wall, were the long horn tail runs parallel to the wall. The bitch in all of it I see that there is absolutely no way to predict what you are getting into until the things is build. Even if the things is built then you might recognize that that peaks of the response upon which you would like to capitalize might be located not in the location of your targeted listening spot and all you desires with proper time-alignment might go to a toilet. So, it is opposable to make the thing “movable”? I do not think so. I think the most sensible to have the horns build as is and then very accurately to play with equalization to get the sound that you feel it right.

Profile is another bitch. Obviously with 40-50Hz horn no one would go for a fast profile (who can afford it?) and the exponential or hyperbolic are the profiles to use. You have more extension with hyperbolic that everyone feel is “better bass”. I do not know about it. Hyperbolic is slightly longer and has much slower opening at the beginning of the horn. That slower expansion creates more horn gain and better bass.  However, I have a theory, pure invention of my mind and proved by nothing, that more gain and better bass hyperbolic has because it has too much near parallel walls in the beginning of the horn and therefore the horn pick some standing waves, that eventually got amplified by horn. The theorist would say that I am fool and show to me the perfect acoustic impedance curves of hyperbolic profile but I am not convinced. A good hyperbolic extend response beyond the mouth rate – isn’t it the even that something is “wrong” from a position of purist-jerk position? I do not have anybody who would be able to elaborate of sonic consequences of that theory of mine…

Returning back to real estate – it might be made coupled or decoupled. In coupled application the hose are permanently installed in a building, via roof, floor, or wall-loaded. In decoupled configuration the hoe are like Jessie horn are independent and might be moved. With all positive intentions there are a LOT of advantages to have decoupled horns. Frankly I sometimes think about wall loaded horns or even about folder horns with my midbass horn might not go over 150-180Hz. If I knew that my midbass will need to stop at let say 100hz then I might try something like Edgar’s Refrigerator horns with my driver and with some optimizations for proper operation. In fact I was told that there is guy in NY who has a pair of Edgar’s Refrigerators and I might try to audition them. The problem with Edgar’s Refrigerators and similar attempts is that people who use them treat them and the open-bottom channel and to get from the Refrigerators as much bass as possible, pretty much fucking up everything. The Refrigerators are 45Hz horns with mouth of probably 55Hz – so it shall not be pushed lower. In fact the driver probably need high passed do not even except lower signal. I wonder if to optimize the Edgar’s Refrigerators for better drivers, much smaller throat and do not push it below let say 45hz then would it possible to get out of them VERY good sound? Do not forget that in my satiation my midbass horn is not the lowest channel in my playback. The advantages are huge – portability and small space but there are also problems. The biggest problem is that I have no idea how much HF I would need from my midbass. If my upperbass horn will be able to pressurize the room then it is OK but most likely I would need help from midbass. The key in here it to have midbass and upperbass to work together in 100-300hz  region where upperbass set the reference of “direction” where bass come from but the midbass set the reference of “softness”. With a straight horn and a proper driver (and I have very cool one) there is no problem to run the midbass to 300Hz or even to 500Hz. With folded horn with each Hz above the hoer sound worse and worse … Unfortunately you would never know what you need until you install the thing and try it…

At this point all my thinking is very non-specific. I think if I get a new pace it will take for me a year unit I get the sound that I am getting now and will finalize what kind midbass solution I would like to implement. I would like the real estate to be accommodateable but I also realized that there are so many variables that it hard to predict anything. With MF horn or even with upperbass horns is simple, with midbass horns it is truly “terra incognita” in terms of forecast how it will sound.

Brits did it right and radical. In south-east London, in  there is an artillery museum and Brits made it interesting. I think the left channel tratrix horn is coming from underground… :-)

RotundaInWoolwich.jpg

The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-27-2009 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 5
Post ID: 11196
Reply to: 11195
But what will the neighbors think?
fiogf49gjkf0d

Romy wrote :

"...The idea to have horn firing from roof is fine but in most of jurisdictions I think it will be prohibitive to build such a thing above roof. I need to check about it. To hide he horn in the living space is impossible of courses but in case of basement it does not take any useful space, which is not the case of ceiling firing horn..."

I was thinking that the upper level would "house" the horns; in other words, there would be a roof and walls to hide them from public view.

In the case of a normal ranch style home (one level, no basement) out in the burbs, the attic is wasted anyway; you could put it to use, and if necessary, modify the roof, letting the drivers live up under decorative little coupolas, complete with windows, curtains, and shutters. Here's a place that makes them ready-to-go :
http://www.centerhillbarns.com/center_hill_barns_cupolas.htm
Add some potted geraniums and the neighbors will love you.

In the case of a 2 or multi-level architecture, the horns would occupy what others would consider "living space", but with a bit of imagination, this space would not be lost; you could easily build shelving between the horns (audio storage?). In your case, all rooms other than the one where the system is are really only good for storage or sleeping, so you're not really loosing LIVING space.

jd*




How to short-circuit evolution: Enshrine mediocrity.
07-27-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 6
Post ID: 11197
Reply to: 11196
Horns and R&E ready to go….
fiogf49gjkf0d

 jessie.dazzle wrote:
In the case of a normal ranch style home (one level, no basement) out in the burbs, the attic is wasted anyway; you could put it to use, and if necessary, modify the roof, letting the drivers live up under decorative little coupolas, complete with windows, curtains, and shutters. Here's a place that makes them ready-to-go :
http://www.centerhillbarns.com/center_hill_barns_cupolas.htm.

They do decorative appendix reedy to go? So, they do as well:

http://en.wikipedia.org/wiki/File:Masjid_Nabawi._Medina,_Saudi_Arabia.jpg

Anyhow, the idea is very cool I never thought about it.

 jessie.dazzle wrote:
Add some potted geraniums and the neighbors will love you…

Oh, do not even go there…!

There is another subject that makes me to think

A hypothetic midbass horn is not my lowers channels; I have and always will have a truly bass channel. I have an array of 10” that adore and I have in my storage a huge, probably 45-50 cub feet, sealed box with Aura 1808 (I would need two). I did not use that enclosure for years it might be interesting to know how my array will be compete with the sealed Aura.

Regardless of the outcome nether Aura or the array a large and I wonder how to hide them into obscurity.  It always fascinated me that the midbass and bass sections might be reused, like to balding a bass section on the side of midbass. To do it in more or less time-aliened and integrated with real-east shall be a real pain in ass but no one said that it is imposable to invent something. Hypothetically a combined midbass and bass sections sound lucrative but what one shell do if the need different location at the given room layout?

Meanwhile I found a good way to explained to people what I am looking for. I tell them that I am a pianist and looking for a space for my mid-nigh practicing… Works very well….

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-27-2009 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 7
Post ID: 11201
Reply to: 11197
Dualing bass
fiogf49gjkf0d
One other nice thing about floor or ceiling-mounting the lower-bass horns is that you wouldn't need such a huge living room; the space would be easier to load (sonically), and you'd have a much easier time finding an appropriate house. 

Romy wrote :
"...it might be interesting to know how my array will be compete with the sealed Aura..."

I would think they might also compete with the mid-bass horns. The Auras can run up to 80, maybe 90Hz (you're probably going to say "60Hz max!!!"); would you really need to use the line arrays in the presence of a pair of mid-bass horns capable of a clean, honest 90Hz?
 
jd*


How to short-circuit evolution: Enshrine mediocrity.
07-27-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 8
Post ID: 11202
Reply to: 11201
Midbass hors vs. flooding subwoofers - very different game.
fiogf49gjkf0d

 jessie.dazzle wrote:
I would think they might also compete with the mid-bass horns. The Auras can run up to 80, maybe 90Hz (you're probably going to say "60Hz max!!!"); would you really need to use the line arrays in the presence of a pair of mid-bass horns capable of a clean, honest 90Hz?

I do not know, this is extremely hard to say what it might be. If I have my let say 45Hz horn then I envision that the LF channel (regardless what it might be: Auras or the Arrays) would be a low-passes at 25-40Hz. With the lowest octave everything is complicated, it is practically worthless to measure the things, and I do not think that any generic rules might be made. Generally the way how I approach it the sound shall be made for a full range, including the midbass horns. Then the individual LF sections needed be introduced… unit they start to take over the midbass hors’ lower knee.  Unfortunately in reality the room modes from LF section begin to talk with output from midbass horn via room and it become mess, manageable mess but manageable only with practical actions rather than applications of theory.

I do not have a lot of practical experience to load relatively large rooms with midbass horns. But do not think that people who claim that they do have practical experience act consciously. In very many cases people dump the midbass “as is” in rooms, get whether they get and call it “right”.  There are very few people, if any, who intentionally and creatively WORK with their midbass/lowbass in order to get the right sound. Of course I do not call the room EQ with a digital room correction devise as “working”… I for instance no where besides what you Jessie is trying to do I see anybody use an open-bottom LF section as a lover extension of closed-bottom midbass hors. Not to mention that I did not see a lot of interesting or properly made/used midbass hors out there… People mostly use midbass horns as flooding subwoofers and it is a totally different game…

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-27-2009 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,571
Joined on 10-12-2006

Post #: 9
Post ID: 11203
Reply to: 11202
To Do It Right?
fiogf49gjkf0d
The best hi-fi LF I have heard came from modified "pro" units (multi-15s) that had a LOT of power thrown at them; and furthermore, the system was "managed" by an... equalizer (albeit, done in real time...).  This is not to speak of its FR performance, BTW, but just to share about the bass.  But this was in a very large room, FWIW, one of the few big hi-fi rooms I've been in that was not a total disaster.

The worst LF (that really was LF...) I have heard has come from big DIY horns that just swamped the room (or the area...), much to the builders' delight; equally bad in large and medium-sized rooms.

I wonder how many people distinguish real LF from "bass", and I wonder how many people understand that implementation of LF might be parallel-but-different than "bass".

Ancient Stereophile founder JG Holt, who has spent a long lifetime recording orchestras, once likened the LF generated by a large orchestra's bass section alone to the sound and power of a semi pulling away from a curb.  It is, in fact, a crapload of energy, and I am guessing it would take a lot of power and a lot of headroom to pull this off, even with a horn, if this were the sort of LF one were looking for.  I am not sure that "horn gain" alone, without the power, would have the right effect for the "power band" of LF.

As a builder, I have noticed that many "lofts" I have been in have not been acoustically inert or "private" -  at all -  but the sound of parties and night time project building carried far and wide, throughout the buildings.  I am not familiar with the old, east coast high-end masonary "apartments" that are reputed to be quiet between units.  Old masonary buildings I have checked out in LA, San Diego and San Francisco have all transferred plenty of noise through floors and ceilings, AC systems, one way or another.  I would recommend a +/- soildly constructed, free-standing structure on a large lot, for single-tenant occupancy.  Still, any room that effectively "contains" all the sound is a real pisser to tailor.


Best regards,
Paul S
07-27-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 10
Post ID: 11204
Reply to: 11203
This search might be complicated
fiogf49gjkf0d

 Paul S wrote:
The best hi-fi LF I have heard came from modified "pro" units (multi-15s) that had a LOT of power thrown at them; and furthermore, the system was "managed" by an... equalizer (albeit, done in real time...). 

They might do fine bass but they are not horns down to lower knee but rather direct radiators. There is nothing wrong with this but I have other views.  Would like do not flood my upper bass the hyper-excurted drivers and with thermodynamic distortions of power SS amplification but rather I would like a horn to embrace what a very high quality, low-excursion, high tone, unstressed compression driver does.

 Paul S wrote:
wonder how many people distinguish real LF from "bass", and I wonder how many people understand that implementation of LF might be parallel-but-different than "bass".

And even less of them understand a difference between atmospheres pressure and tonal pressure.

 Paul S wrote:
As a builder, I have noticed that many "lofts" I have been in have not been acoustically inert or "private" -  at all -  but the sound of parties and night time project building carried far and wide, throughout the buildings.  I am not familiar with the old, east coast high-end masonary "apartments" that are reputed to be quiet between units.  Old masonary buildings I have checked out in LA, San Diego and San Francisco have all transferred plenty of noise through floors and ceilings, AC systems, one way or another.  I would recommend a +/- soildly constructed, free-standing structure on a large lot, for single-tenant occupancy.  Still, any room that effectively "contains" all the sound is a real pisser to tailor.

I am considering large city lofts but a few that I have seen do not have the mandatory for me concrete walls, floors and ceilings. In fact it is VERY hard to find them…. .  The +/- solidly constructed, free-standing homes at very near suburbs is my primary area of interest. Unfortunately those building have idiotic, family-oriented floor plans with 700 sq feet of corridors and 7-10 rooms … Anyhow, I think this search might be a bit more complicated then I initially thought. 

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-28-2009 Post does not mapped to Knowledge Tree
tuga


Posts 174
Joined on 12-26-2007

Post #: 11
Post ID: 11206
Reply to: 11190
The Mendelsohn approach.
fiogf49gjkf0d
Romy,


I know you are against a dedicated listening room but if you were to consider occupying the basement you could try an organic Erich Mendelsohn-like design that would incorporate the midbass horn and some recessed niches for media or other stuff you might want to store/display.
It could also be an efficient way of achieving a more subdued room personality.
Natural light could be achieved with a light well in the façade.
I've added a little sketch but this design is very much dependent of room configuration...


Cheers,

Ric


"Science draws the wave, poetry fills it with water" Teixeira Pascoaes
07-28-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 12
Post ID: 11208
Reply to: 11206
A pool of ideas for now….
fiogf49gjkf0d
Thanks, Ric.

At this point “specificity” of the sings positioning is not my primary interest but I rather am looking into strategic and conceptual solutions.  For instance the Jessie’s idea to use attic  and ceiling  for midbass entry is very lucrative but how the hell bring 9’ horn with 2.5M mouth to an attic  I have no idea, unless the attic  is large enough to build it in there. Once again, at this point I just accumulate the thoughts, a sort of a pool of ideas from where I might fish something if I find a properly that I like otherwise. I find it useful to look at house and run a few thought out scenarios in my head.

What actually surprises me, and I never thought about it before, is that some people build very expensive and dedicated listening rooms in this houses and they practically never employ idea of integrated midbass horns.  I am talking about the folks who spent $200K-$300K juts for building the rooms and then they end up in there with a pair of Kharmas, Wilsons, Martin Logans or Von Schweikerts. I find it as a tremendous waste and I kind of envy people who exercise chance to arrange real-estate in accordance with these objectives. If to build that listening room from scratch and it to presume the use of horn-loaded midbass and open-bottom lower bass then it is possible to come up with incredibly interesting opportunities…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-28-2009 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 13
Post ID: 11209
Reply to: 11204
The big D
fiogf49gjkf0d
Are you sure you couldn't move your business to Detroit?
This will give you some idea of what's possible there :
http://www.roofcleaningbook.com/detroit_lofts.html
(15,000 Sq ft theater for $225,000)

jd*



How to short-circuit evolution: Enshrine mediocrity.
07-28-2009 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 14
Post ID: 11211
Reply to: 11208
Raising the roof
fiogf49gjkf0d
Romy wrote :

"...the Jessie’s idea to use attic and ceiling for midbass entry is very lucrative but how the hell bring 9’ horn with 2.5M mouth to an attic  I have no idea..."

You could do something like this :

1) Have the horns built (either right there in the living room or off site, it makes no difference), and have the builder include a large hook or attachment point at the exterior (back side) of the mouth at all four corners of each horn

2) Cut a hole in the ceiling a little larger than the size of the mouth for each horn
   
3) Now the tricky part : With pulleys located in the attic and the horn standing on its mouth and driver-end pointing up through hole, attach ropes to all four corners of the horn and, with the help of friends or paid workers, lift each horn vertically until flush with ceiling (don't forget to take photos!)
  
4) Secure horns to building's structure
   
5) Finish off the edge of the holes in the ceiling (I would not make the transition between mouth and ceiling completely seamless, as the horn will move and a crack will result; use a foam, rubber, or felt gasket)

Of course if the driver-ends are going to protrude past the roof of the hose, you'll want to have the roof modified first.

jd*


How to short-circuit evolution: Enshrine mediocrity.
07-28-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 15
Post ID: 11215
Reply to: 11196
A vertical midbass horn and environment
fiogf49gjkf0d
Jessie’s comments about my idea to position midbass straight horns from basement, upper- firing and his warning that the horn will get converted into a giant garbage can made me to think. I did not think about it but it is a reasonable concern.  Hypothetically it might be possible to inject in the beginning of the throat a nylon filter that would be catching the dirt but be acoustically transparent at LF…

This all opened for me a box of whole new thigh that I did not have before. Let pretend that I mount two straight vertical horns from ceiling up, in the way how Jessie depicted. A pair of 9” horn with a full 40-45Hz moth have a huge volume and sitting on a  ceiling of let say 900 sq feet room the horns will act as strong chimneys. Sure it will not be any flow across the horn but the horns still will have much higher temperate at throats then at the floor of listening room.

So, this brings a few concerns.  First is the over-drying of the horn’s cone. Second is the expediting of magnet demagnetizing from temperature (ALNOCO magnet of my 10/40-151 are especially valuable). And the third one is the horn constriction with a respect that horn will be working at relatively high temperature. The last one needs further explanation.

The ceiling-hanging horns most likely will not be as solid and heavy as basement-based upper- firing horns as therefore most possibly will be made from wood. The normal construction wood that people use contains 60-80% of moisture. With time goes by the horn dry out, get cracked and so on. So, if a ceiling-hanging horn will be made from wood then the wood needs to be somehow dehydrated.  The people who use wood for sculpture use wood with 6% moisture. I wonder if it possible to cut the horn from 6% moisture wood and then seal it with polyethylene? Anyhow, it is all need to be well thought out…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-28-2009 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,571
Joined on 10-12-2006

Post #: 16
Post ID: 11217
Reply to: 11215
Brownstones?
fiogf49gjkf0d

Do I remember that old masonary "row houses" are common enough in certain old neighborhoods in some old eastern cities?  I am thinking of the case where a given multi-story "house", sometimes with a basement, shares a thick wall with its neighbor but not floors/ceilings.  Of course, I don't know whether/how sound might get out windows to disturb very close neighbors.  But this still might be better than typical "loft" spaces that are often divided up with metal stud/drywall walls and shared corridors, elvators and stairwells.

Best regards,
Paul S

07-28-2009 Post does not mapped to Knowledge Tree
scooter
Posts 161
Joined on 07-17-2008

Post #: 17
Post ID: 11218
Reply to: 11217
Suburban home additions for horns
fiogf49gjkf0d

Hi Romy,

Won't work with row houses but....

Suburbs close to the city don't have much space around here, but often have a patch of useless lawn (unless you plan on a McMansion, whereby your house should cover every possbile square centermeter of land).  This is my situation and I have thought about this for a while; perhaps you can make use of the lawn. 

- If you will be listening on the ground floor, one option could be to put the horns outside and just bore a few holes into the house.  You could approach the holes in several ways; just putting two holes in the house could be a problem for horn adjustments and (perhaps!) resale in certain situations.  You might also think of putting holes where windows are or could be placed in the future.  As you want to protect the horns from the elements and control temperature, you would need some type of addition, perhaps something that in the future could be converted into a sunporch with sliding doors put where the holes were and windows added.

- If you will be listening in the basement you could build an underground basement addition (like a cave), although from a practical perspective that could get a bit expensive to pay off the city "inspectors", dig the hole and pour the cement.  You would need to build that extension a bit big to get around or if you want to change/adjust things; I think the above ground extension would be easier to changehorns.JPG

07-29-2009 Post does not mapped to Knowledge Tree
tuga


Posts 174
Joined on 12-26-2007

Post #: 18
Post ID: 11219
Reply to: 11215
Ceiling horn ups and downsides
fiogf49gjkf0d
 Romy the Cat wrote:
Jessie’s comments about my idea to position midbass straight horns from basement, upper- firing and his warning that the horn will get converted into a giant garbage can made me to think. I did not think about it but it is a reasonable concern.  Hypothetically it might be possible to inject in the beginning of the throat a nylon filter that would be catching the dirt but be acoustically transparent at LF…

This all opened for me a box of whole new thigh that I did not have before. Let pretend that I mount two straight vertical horns from ceiling up, in the way how Jessie depicted. A pair of 9” horn with a full 40-45Hz moth have a huge volume and sitting on a  ceiling of let say 900 sq feet room the horns will act as strong chimneys. Sure it will not be any flow across the horn but the horns still will have much higher temperate at throats then at the floor of listening room.

So, this brings a few concerns.  First is the over-drying of the horn’s cone. Second is the expediting of magnet demagnetizing from temperature (ALNOCO magnet of my 10/40-151 are especially valuable). And the third one is the horn constriction with a respect that horn will be working at relatively high temperature. The last one needs further explanation.

The ceiling-hanging horns most likely will not be as solid and heavy as basement-based upper- firing horns as therefore most possibly will be made from wood. The normal construction wood that people use contains 60-80% of moisture. With time goes by the horn dry out, get cracked and so on. So, if a ceiling-hanging horn will be made from wood then the wood needs to be somehow dehydrated.  The people who use wood for sculpture use wood with 6% moisture. I wonder if it possible to cut the horn from 6% moisture wood and then seal it with polyethylene? Anyhow, it is all need to be well thought out…

The Cat



In my view, one other cause for concern would be the possible resonance of the ceiling if the ceiling structure is made wood.
I don't have any experience with all-wood houses but in buildings with masonry walls and wood beams+flooring low frequencies do induce quite a bit of vibration.

As for horn material, why not cast it in a 4 part fiberglass surface and, when assembled, thicken/dampen the outer side of the walls with something dense like plaster or maybe something lighter like papier-mâché?
The fiberglass would definitely give an interesting random-textured surface to the inside of the horn but it would also intensify the "chimney" effect. You could always remove the fiberglass panels, though, after the papier-mâché had dried.

Cheers,
Ric


"Science draws the wave, poetry fills it with water" Teixeira Pascoaes
07-29-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 19
Post ID: 11220
Reply to: 11204
The real-state U-turn?
fiogf49gjkf0d
The more I looking and thinking about the pool of available idea and properties then more I come to a “ridicules” conclusion that I most likely will not find what I need and what I like. The point is that if I combine my requirement for not suspended floor, solid concrete walls, absence of neighbors, 900 sq feet of a single room, ability to do capital change in the building, proper neighborhood and many other non-audio requirement then I do not think suck a place will be easy to find. It is not to mention that whatever I might find I will be accommodating to the existing half-ass solution to what I need.

Last night I discussed this with a friend of mine and he pitched an interesting idea. He proposes instead of looking a relatively large house that would be able to convert a few rooms into one 800-1000 sq feet room to look for a small and inexpensive house on a larger lot where I would be able to build my own attached living room. Actually, the more I think about this idea that more it sound sane to me. I might find a nice little cute house of let say 1000 sq feet, then cut one wall off and attach my 1000 sq feet living/listening room. To render the projects like this will be not very expensive as it will be no pluming, no basement and no other things involved. Furthermore if it will be the room that is made according to my rules then it will be perfectly accommodated to what I need, with properly constructed amendments that I would like to have (which might even allow me to have the room itself smaller). It would be much ease to fine such a convertible house, I just need to do some research with zoning regulation and building permits. We were sitting and brainstorming what might be done and it appeared to me that it might be a VERY good direction to go. The room itself is a part of house and even for resale it might be hold own merit. For instance the side midbass horns entry into the room in case I need to abandon this property might be easily converted into side windows and sold to normal people…

Ok, now I need to find an architect-girlfriend. :-)

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-29-2009 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 20
Post ID: 11222
Reply to: 11220
Side-stepping legal issues with added on room
fiogf49gjkf0d
One easy way around any zoning issues with an added on room is to find a house with a large garage, knock down the garage and build the new space on the existing concrete pad. That way you won't have to worry about easements and how close you are to the property line, because the space you'd use has already been approved.

A custom built space remains my first choice; among many other benefits, I imagine it would allow the large horns to be located on the same wall, and firing in the same direction as the MF & HF horns. If theft is a concern, a custom addition could easily be made quite theft-proof. Give it a flat roof and you automatically gain outdoor living space.

Regarding heat finding its way up to the driver of a ceiling-mounted vertical horn: I don't yet have a good answer for that one. However, heat accumulating from the sun striking the roof of the attic would seem far more likely to exceed anything that would waft up from within the listening space. This had occurred to me; you'd definitely want a good pair of attic fans.

jd*


How to short-circuit evolution: Enshrine mediocrity.
07-31-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 21
Post ID: 11238
Reply to: 11190
About the Rogero’s or Johan Dreyer’s approach.
fiogf49gjkf0d

A visitor of my site sent me email with following:

“I take it you don't like the Rogero style (or Johan Dreyer) bass horns with wings, but you could add compression to a similar setup and make it work properly. I have made several designs with ….”

This idea of bass horn arrangement that those guys use is very interesting in context of this thread. Bothe Rogero’s system and Johan Dreyer’s were mentioned before and I the Johan Dreyer’s horns were discussed:

http://www.romythecat.com/Forums/ShowPost.aspx?postID=6605#6605

Johan Dreyer’s showed up occasionally at this site

http://www.romythecat.com/Search.aspx?Phrase=Dreyer

Both Rogero and Johan had the same type bass horn installation that is certainly very elegant and invisible. My major problem with this approach is that those have very large mouth and work at lower frequencies rather as direct radiators line-array then horns. In this configuration those guys shell not use 515G drivers but rather for 515B drivers that have always 25Hz lower resonant frequency. So, the idea of Rogero’s or Johan Dreyer’s approach is to put one ass on two chairs and to get lower bass from essentially midbass horns.  It would be very interesting to see the Rogero’s or Johan’s equalization curve. We need to subtract the room gain, then we need to measure the acoustic pressure with horn and without horn at 40Hz. (resonant frequency of 515G is about 37-40Hz). If with horn it will be 6dB or more then whatever I say of BS. I do not think it is. If you look at the picture of Johan Dreyer’s horn then you see that is it very large horn but short with relatively large throat.  This time of horn might be fully-horn loaded (have +6dB or more) only down to relatively high frequency. I see no way it will have horn loaded all the way down.

JohanDreyerHorns.JPG

http://cgi.audioasylum.com/systems/8608.html

It is not the way how I would like to go with my own solution. I would like my midbass to have resonant frequency around 45Hz, the mouth rate to be around the same and the horn do not out (anechoicly) anything under the mouth rate. In this case the mouth will take care of the throat reactance and the driver will be properly operating on its own merit with no excessive excursion and with fully loading the horn down to the lowers horn band-pass frequency. So, I would like the lowest octave of the horn to be the effort of horn, not the horn’s driver. Sure the total sound in the room will be less extended to the bottom but it will be much cleaner, much SOFTER (which is the key) and will never sound like elephant belch – the characteristic that 95% of all midbass horns sound out there.  I do not propose that it is how the Rogero or Johan bass horn sound. I never heard them but anyone understand that all those conservations are purely speculative and all that I am trying to do is to furnish (based up my other experiences) the best conditions that might (or might not) lead to superior/maximum result for chosen topology.

So, would it be possible to optimize the Rogero’s and Johan’s idea to make it suitable with my objectives. I think it is and I think it might be an interesting direction as well. If to make the horn like Johan Dreyer did only to drive it with a single 8” throat then the horn will be longer but it will be properly loaded. In this configuration the curve will not be only on right and left but also atop and at bottom. Sure, I would like to use only long walls for my playback, so I was playing with the Rogero’s and Johan’s idea true to do it effective, elegant and small. Below is what I come up with. An additional good part for this idea is that it has no extended attributes outside of building and it will not have any zoning problems or the need to have neighbor compliance.

PlayWithJohanDreyerIdea.JPG

Also below is my sketch of a “perfect room” (in terms of dimensions) I posted a week ago in other thread.

Perfect_room.JPG

Rgs, Romy teh Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-31-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 22
Post ID: 11241
Reply to: 11238
Playing with Johan Dreyer’s idea further.
fiogf49gjkf0d

It is very self-explanatory and liked it a lot. The advantage is that it might be used in any rectangular room and the most important that it is VERY simple to build this way. I think that if I have room then I might stop by in a local architecture shape and proposing a few cases of beer I might recruit local students to build foe me a set of plaster walls like this. The wall insets might be even easily removed if I wish so. Very cool!

PlayWithJohanDreyerIdea_1.JPG




"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-31-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 23
Post ID: 11244
Reply to: 11241
Eh, stupid!
fiogf49gjkf0d
 Romy the Cat wrote:

It is very self-explanatory and liked it a lot. The advantage is that it might be used in any rectangular room and the most important that it is VERY simple to build this way. I think that if I have room then I might stop by in a local architecture shape and proposing a few cases of beer I might recruit local students to build foe me a set of plaster walls like this. The wall insets might be even easily removed if I wish so. Very cool! 
In my enthusiasm for R&E accommodation of the Johan Dreyer’s idea I forgot of about the time alignment.  With all elegant of my last proposal it will be time arrival not suitable for use, wich is very sad….

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-01-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 24
Post ID: 11256
Reply to: 11190
And sometimes I feel so blew that I do not what anything.
fiogf49gjkf0d
I, in my stupid imagination, thought that I will be able to close my R&E saga as I thought I found a truly wonderful new home for myself.  The palace turned out to be grossly, I would say fraudulently, misspresented. Got home very disappointed and was looking for a refuge.

The refuse comes with Handel’s Messiah. I max out and almost literally hug my air conditioner; I warmed up Melquiades and crank up the Macondo’s volume. Then I spend an hour and a half with Swedish Radio Symphony Orchestra under Anders Ohrwall and the celebrated The Stockholm Bach Choir crashing through Handel famous work.  Leaving all aspect of the Ohrwall’s interpretation outside of the subject of this thread I need to mention that while I was listening I did pay my side attention to the real estate aspect of my playback’s sound.

The playback sounded so good that I could not stand it sometimes and I was loosing myself in disbelieve that such a Moron as I am was able to accomplish it. My relatively small room sounded literally boundless and I heard no typical limitations associated with limited room. I REALLY like how my room is pressurized – it pressurized with very proper “tone” pressure right the way and across the whole full range. It is full, think and very what I call “very delegated sound”. It would be heard to explain to normal people what “delegated sound” is but the folks who do object-oriented software engineering might understand….

I have no idea how much time and efforts it will take for me to get the same sound in a new larger place. Sure a larger place would offers own new advantaged and opportunities but I LOVE Sound in this room and I do not know if this type of sound will be even possible in larger room. My current room is 21’ by 18’; I am looking for 3 times bigger. The 4 times larger, the 42’ by 36’ will be a bit too large for me… Still I might be missing in future the Sound I have now…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-01-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 25
Post ID: 11257
Reply to: 11241
Another renderation of Rogero’s or Johan Dreyer’s idea
fiogf49gjkf0d
This is a guy from Japan and he made his 4 ways GOTO drivers.

MidBassHornsWithGoto.jpg

What I like that he made midbass horns with smaller throat then Johan Dreyer. This Japanise guy has tall room and he made his horns to have smaller throat and to have a curve up – that is smart. The rough rectangular edges around the bass horn are not necessary and shall not be there. In fact I would make the upper curve even taller all the way up. The guy used 4 drivers but they do not start from floor but I would say 25-30” up – a waste of throat in my view. Still, these horns need length, length, length more length…

Now, compare it with Marcel Roggero horns from France

MarcelRoggeroHorns.jpg

The Cat

PS: Also there is a guy who builds wooden midbass hors. Does anyone knows him and knows if he accept instructions for custom orders and able to follow them?

http://www.thundergun.it/ENGLISH.htm



"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 1 of 10 (248 items) Select Pages:  1 2 3 4 5 » ... Last »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  45Hz Bass Horn..  Can We Ever be Saved From Ourselves?...  Horn-Loaded Speakers Forum     23  306291  09-19-2006
  »  New  A right midbass solution for Altec 515G...  Its even possible to make my midbass......  Horn-Loaded Speakers Forum     21  189912  05-06-2007
  »  New  About bass horns by Johan Dreyer..  There are lowest bass horns and there are not lowest b...  Horn-Loaded Speakers Forum     5  91339  02-11-2008
  »  New  Barn Conversion - James' Project..  The vintage vs. contemporary compression driver....  Horn-Loaded Speakers Forum     28  353253  02-04-2007
  »  New  Chinese upperbass horn...  Some sensibility about bass reproduction...  Horn-Loaded Speakers Forum     35  359621  08-08-2005
  »  New  Eventually - a reasonable midbass horn from GOTO..  Clever DIY going on where?...  Horn-Loaded Speakers Forum     97  1160518  11-19-2007
  »  New  Magico: Robert Harley’s upperbass mouth...  Surprisingly interesting write up by Federated Mike abo...  Horn-Loaded Speakers Forum     35  322438  02-19-2006
  »  New  Jessie Dazzle Project..  Will this better to be auditable?...  Horn-Loaded Speakers Forum     172  1509260  08-03-2007
  »  New  Problems with horns: upper bass ..  Must it be about loading?...  Horn-Loaded Speakers Forum     109  1130396  03-25-2005
  »  New  Denouncing of idea of Bass Horns...  Denouncing of idea of Bass Horns....  Horn-Loaded Speakers Forum     0  25954  04-15-2008
  »  New  Horn high-sensitively around Boston..  Horn high-sensitively around Boston...  Horn-Loaded Speakers Forum     0  15104  10-29-2008
  »  New  The Macondo’s Upper Bass Channel: what is next?..  Görlich again...  Horn-Loaded Speakers Forum     30  279635  10-28-2007
  »  New  More about the EdgarHorn Bass..  More about the EdgarHorn Bass...  Horn-Loaded Speakers Forum     0  28906  01-13-2005
  »  New  Experience Music Horn Installation @ VSAC..  RCA MI-1428B vs Vitavox S2...  Horn-Loaded Speakers Forum     25  266106  05-27-2008
  »  New  A book about Loudspeakers and Rooms?..  Book review...  Horn-Loaded Speakers Forum     5  49372  08-18-2009
  »  New  How to select mid/upper bass horn drivers...  How to select mid/upper bass horn drivers....  Horn-Loaded Speakers Forum     0  24720  08-25-2009
  »  New  ... again on GOTO Unit drivers.....  GOTO installation in Lithuania....  Horn-Loaded Speakers Forum     108  1101570  08-16-2008
  »  New  Learn to listen your listening rooms..  Rooms and music-rooms...  Audio For Dummies ™  Forum     15  125618  04-05-2005
  »  New  Amplifiers heat… a real-estate solution?..  I have seen this simular concept...  Melquiades Amplifier  Forum     1  24319  09-18-2009
  »  New  I have a dream, the dream about a Chair...  A bit exaggerated to me....  Playback Listening  Forum     31  216260  10-29-2009
  »  New  8" Goto Woofer for 60Hz Horn..  It's not a Goto 8in driver...  Horn-Loaded Speakers Forum     5  84557  11-03-2008
  »  New  The Real Total Horn..  The Real Total Horn...  Horn-Loaded Speakers Forum     0  15348  01-17-2008
  »  New  My Multi-way Horns..  Faital chamber/ratio...  Horn-Loaded Speakers Forum     8  123203  11-29-2009
  »  New  The 5-ways from Germany...  Another Kid?...  Horn-Loaded Speakers Forum     38  240604  12-06-2009
  »  New  A datacenter at home and … "sound"...  Noise cancellation not likely possible...  Audio Discussions  Forum     6  47748  02-16-2010
  »  New  DSET and Cables...  DSET and Cables....  Audio Discussions  Forum     0  15518  02-23-2010
  »  New  Romy The Cat's new Listening Room..  Won't be the last time he makes that trip!...  Audio Discussions  Forum     478  2779461  03-28-2010
  »  New  An idea of “Rain Wake-Up Horn”?..  Looking Deeper into Rain Wake Up Horn...  Horn-Loaded Speakers Forum     3  32117  05-08-2010
  »  New  Macondo’s Midbass Project – the grown up time...  Vitavox 15/40...  Horn-Loaded Speakers Forum     455  2839389  05-20-2010
  »  New  Macondo’s lowest channel...  What truly are you tryin to accomplish?...  Horn-Loaded Speakers Forum     150  1343919  09-15-2010
  »  New  Superbly interesting effect: Suspended decoupled floor ..  Superbly interesting effect: Suspended decoupled floor ...  Playback Listening  Forum     0  17310  10-08-2010
  »  New  Mystery of bass horn calibration: Radiating Surface Dee..  Mystery of bass horn calibration: Radiating Surface Dee...  Horn-Loaded Speakers Forum     0  16594  02-03-2011
  »  New  Dedicated Music Room Build..  Show it....  Horn-Loaded Speakers Forum     6  58922  03-03-2011
  »  New  What are the effects of back chamber volume for mid-bas..  A ha!...  Horn-Loaded Speakers Forum     2  20950  09-27-2013
  »  New  A listening room for a domesticated Cat?..  Eventually!...  Audio Discussions  Forum     283  874843  02-04-2016
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts