| Search | Login/Register
   Home » Horn-Loaded Speakers» Shindo Latour (9 posts, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (9 items) Select Pages: 
03-27-2008 Post does not mapped to Knowledge Tree
Judas


Posts 5
Joined on 03-28-2008
Post #: 1
Post ID: 7023
Reply to: 7023
Shindo Latour
What do you think about the technology employed here :

Shindo Latour

http://www.shindo-laboratory.co.jp/English/Latour.jpg

 Units: Field high frequency unit and Field low Frequency unit and power supply units for Field coils.
  Enclsurers:floor type.
  Frequency Response:30Hz - 20,000Hz.
  Nominal Impedance:16O.
  Power capacity or Max Input:30W.
  Sensitivity:100dB/ W/m.
  Power Requirements:AC 120V, 50/60Hz.
  Dimensions:W 700×H 1,200×D 460mm.
  Weight:70kg
03-28-2008 Post does not mapped to Knowledge Tree
Judas


Posts 5
Joined on 03-28-2008
Post #: 2
Post ID: 7027
Reply to: 7023
Shindo latour
Sorry right size =
03-28-2008 Post does not mapped to Knowledge Tree
Judas


Posts 5
Joined on 03-28-2008
Post #: 3
Post ID: 7030
Reply to: 7027
Latour shindo
The Latour is a two way design with a compression horn driver and a 15" stiff paper, short throw woofer.
03-28-2008 Post does not mapped to Knowledge Tree
Judas


Posts 5
Joined on 03-28-2008
Post #: 4
Post ID: 7037
Reply to: 7030
Shindo
More technical data :

Designed around the Altec 288 driver and Altec 515B woofer, the new Latour, standing for "London western type", has a custom designed and optimized crossover network. Overall frequency response is rated from 30Hz to 20kHz with a single-ended triode friendly nominal Impedance of 16 ohms. Power handling is 30 watts maximum that can easily achieve high acoustic output levels due to the 100dB/W/m sensitivity. Overall dimensions are 700 x 1,200 x 460 (WxHxD in mm). Overall weight is a very substantial 68Kg. The Latour can also be produced with the Altec 415 or 416 drivers.
03-29-2008 Post does not mapped to Knowledge Tree
I.M.Distortion


Posts 9
Joined on 03-26-2008
Post #: 5
Post ID: 7039
Reply to: 7027
Does the Shindo have a ported enclosure? And is that a lens in front of the horn? thanks
 Judas wrote:
Sorry right size =
03-29-2008 Post does not mapped to Knowledge Tree
Judas


Posts 5
Joined on 03-28-2008
Post #: 6
Post ID: 7040
Reply to: 7039
Latour
It is not ported...

Is this thread THAT boring ?
03-29-2008 Post does not mapped to Knowledge Tree
I.M.Distortion


Posts 9
Joined on 03-26-2008
Post #: 7
Post ID: 7041
Reply to: 7040
Shindo
So are the drivers just reworked altec componets with fieldcoils installed? Or are the drivers based on the 288 and 515B design? And you are correct some may not understand this type of workmanship. Can you post a picture of the front of the horn? I am interested in the horn type he used. thanks
03-29-2008 Post does not mapped to Knowledge Tree
Wojtek
Pinckney (MI), United States
Posts 178
Joined on 09-01-2005
Post #: 8
Post ID: 7042
Reply to: 7040
In a way it is boring
What's there to speculate about ?? Speakers are rare  and expensive and the principle is old JBL altec 19 solution. It is 100dB efficient probably from 80hz up .Whats the purpose of your post ??Did you hear them or looking for encouragement to buy?
Regards, W
03-30-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,156
Joined on 05-28-2004
Post #: 9
Post ID: 7044
Reply to: 7040
It is not the thread boring but you are.

 Judas wrote:
Is this thread THAT boring?

Judas,

I patiently wait until you realize that this site is not compatible with audio idiocy. I told you before that you are exactly the person who is a demonstrable illustration of what Audio Cretinism is all about. People like you run from site to site, from a reviewer to a reviewer, develop in own feeble audio-brain the new idiotic audio-buy ideas-fix and for a next 2-3 months they enslave themselves to a serve the new “messianic audio BS buy”. It would be fine if it was all that you do but the Morons like you each time build around a new “messianic audio-buy” a “collation of supporters” the similar to yourself cronies who would do anything  juts to be welcomed to the crowd of the ideas-fix supporter who pray to new-wrapped for them audio BS. BTW, it has nothing to do with Shindo speakers but it is my reaction to you again posting at my site.

Samuel, I am protecting my site from any kind of idiots. You have posted here before under the user ID samuel33:

http://www.goodsoundclub.com/Search.aspx?UserID=408&From=1/1/2004&To=3/29/2008&Phrase=&PerPage=30

 It was during the period when Jonathan Valin raped you idiots at his forum with his invention of Magiaco Mini. How Valin moved forward inventing for his cretins a new BS and you feel crisis and feel the needs to feed your idiocy with a new “messianic audio-buy”… Good luck to you in your journey. Your audio predictably is not the subject that I would worry or express any interest and assist you with. I have no interest to read your idiotic posts; there are other places where you will be accepted like Napoleon Bonaparte, here I you are just an accidental Moron who has no business to read, not to mention to post at my site. If you register at this site again you will not be able to access/read it. 

My apologies to apologies to anyone for this post but I have the reputation and the value of the site to protect. Since it is not the first time I am not giving you a chance to reply and I am deactivating your Judas account.

Once again it has nothing to do with Shindo Latour loudspeaker.
Romy the Cat

"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 1 of 1 (9 items) Select Pages: 
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts