|
|
| Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
 |
|
|
|
|
|
...so I measured Vac at the Junction Box for a -12dB 120Hz sine. And I measured a DC-200Hz sweep in REW.Then I added 8m of 14AWG wire between the amp and the Junction Box and measured the same things.By adding the 8m of 14awg Vac at the Junction Box...
|
|
I must be somehow unlucky here. I recently added a US cleaner from Audiorevita +DIOY 1micron filtering. I use Rushton's recipe with 5% IPA +0.13% Photoflo + Deionezed water, 15mins, 35C, 1.5" spacing, 60% power@40kHz, 3rpm (yes, the motor is quite fa...
|
|
Bill, you say you use 3 separate AC sources. How are these sources separated? Are they all 120 VAC? Are they all in phase? Do they share a ground at any point before actual grounding, and if so, where do the grounds coincide? Do you use a dedicat...
|
|
[quote user="Romy the Cat"] It is incredibly rare that an audio makers can express pure and unadulterated interest in Sound, interest that is wider and then boundary of own product or own field. [/quote]I agree, I met maybe only 1 or 2 who really kne...
|
|
Romy, you might want to re-think 2 guys and pneumatic casters under a bare frame dolly for a 950 lb. unit. If you insist on doing it this way, I hope you will make and post a video of the event. I'd at least consider solid, rated casters, espec...
|
|
I have stated several times that the ML2s are less sensitive to bad electricity than my phono stage, and this is true. However, this is not to say that the amps are immune to bad electricity. In fact, it is the effects of bad electricity ...
|
|
All transformers are phase inverting. The lowest leakage point of primary and secondary windings relationship to conventional E/I and C core is the physical start of the helical spiral winding. This is assuming more than one layer of wire. In toroid'...
|
|
It's kinda fun every now and then to try to figure out a BEP solution on my own. The following will illustrate why I don't do this very often...One problem that is very hard to deal with is efficiency, in the broadest sense. Without "hi-tech" compr...
|
|
[quote user="Bud"]All transformers are phase inverting. The lowest leakage point of primary and secondary windings relationship to conventional E/I and C core is the physical start of the helical spiral winding. This is assuming more than one layer o...
|
|
Interesting thread. I went down this rabbit hole a long time ago, and I think I have emerged, or at least can see light at the end. I started with a Nitty Gritty, generic alcohol water mix and fine nap brush. I noticed a positive difference, but ...
|
|
Wellington, thanks for detailed info.
Currently I have two RX-5000 tt (also Michell Orb and modded Thechnics SL-1200).
I bougth the two Micro's from Japan (local friend helped me on) so the motors are labeled with 100 VAC.
One of them is supplied ...
|
|
With interest I read the posts about the mains / power and the effect on hifi gear.
The conclusion why and how electricity thus have an impact and the overall sound of our system is influenced by it is actually quite simple.
Generally the mains is ...
|
|
Another particle of a good Horn Propaganda. It was published in Sound Practices in 1994 and written by Joe Roberts. I disagree with quite many of the author’s statements but his strategic view that the majority of the horns and the horn installations...
|
|
It kind of strange that so many manufactures produce preamps, so many users use preamps but no one talks about them seriously. The dealers sell them, the reviewers write their doodle but the manufactures do each year a new version but what we, th...
|
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
|
Last 24-hours posts: |
0 |
|
 |
|
|
Total human visitors: |
42,595,328 |
|
|
|
|
|
|