|
|
| Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
 |
|
|
|
|
|
Funny thing is that recently I had 4 Walker Proscuitto owners buy Technics SP-10mk3 motor units from me in a matter of 2 weeks. I think a guy in the states, who had said Walker TT, also created a plinth for the Technics and it happily put the Proscui...
|
|
I should have known the new Technics tonearm was not a "factory reinstatement" of the old EPA-100. Having just googled it, I can now see it looks more like the (later but still discontinued, I think; also, cheaper...) EPA-500. On the one hand, it f...
|
|
Like I said before, my favorite analog threads are the Technics threads; but 103 threads run a close second.These folks are downright fervent!Mention the 103 in the same breath with a Technics TT and watch the counter roll blurred until it blows smok...
|
|
The BIS used to print their equipment on their CD booklets. The one I like most in terms of sound quality uses this recorder:http://cgi.ebay.de/Technics-Profi-DAT-Recorder-SV-260_W0QQitemZ320227893694QQihZ011QQcategoryZ96269QQssPageNameZWDVWQQrdZ1QQc...
|
|
Funny thing is that recently I had 4 Walker Proscuitto owners buy Technics SP-10mk3 motor units from me in a matter of 2 weeks. I think a guy in the states, who had said Walker TT, also created a plinth for the Technics and it happily put the Proscui...
|
|
[quote user="Serge"]that direct drive sounds incoherent and muddy?[/quote]Oh yeh, the Technics SP10 sounds really incoherent and muddy ....
|
|
I would like to buy new turntable – just to listen to music every evening. Current set up is rather entry by level – Technics 1210 with Grado Gold and Trichord Dino. However it could produce more or less correct time picture, and involve me into the ...
|
|
i found the Fujitsu ten team (Eclipse co) brand new.they have paid the desired attention to subject.http://www.coherent-audio.de/download/e_TD712z_Catalog.pdfthey dont refer their technics in baffle assembly is correcting time domain(phase)but surely...
|
|
enjoy_the_music wrote "but would it be easier to use a device like the old Audio Technica AT-666?"I had one of those, and it was horrible. You need to stop the platter, attach a hose, pump (manually if I remember correctly), detach the hose.Mine woul...
|
|
with his photo and comments on his Technics SP10.Inexperienced imbecile that I am in participating in thread discussions, my question went into limbo (and thank you for responding to it).And thanks to you, I bought the SPU Mono some time back and now...
|
|
Romy wrote:" N-set wrote: let me point out that the force injected by the needle moving through a groove can apparently be quite substantial (loud passages etc) dynamically slowing down the plate.
Only with flimsy platters perhaps. With heavy ...
|
|
Romy, I hope you are not saying that this post was somehow taken as "Hot"?!? I mean, this is just a straight-ahead, generic info/opinion post, right?The only reason I could see to find fault with the post is if someone had some sort of "investment" ...
|
|
The cat in this videohttp://www.youtube.com/watch?v=l1iKaZ9KKds&NR=1looks nearly exactly like Callie when she was younger. (The actual picture I took was too large to upload, though I did email Romy a copy.)This is a way better use of all those ...
|
|
I should have known the new Technics tonearm was not a "factory reinstatement" of the old EPA-100. Having just googled it, I can now see it looks more like the (later but still discontinued, I think; also, cheaper...) EPA-500. On the one hand, it f...
|
|
Guy, that is a VERY interesting observation about your sense that belt drive speed is "cyclical". I agree that belt/heavy problems are more "long term" versus DD "short term". So in this sense I suppose it's pick your poison.&nb...
|
|
With regard to 'How fast to get to correct speed' These are my steps:- Hand spin the flywheel first- Hand rotate the platter until the Tach reads around 33rpm- Start the motor - Speed will be within 2-3% straight away - Due to the PSU altering the vo...
|
|
[quote user="Romy the Cat"]Are you sure that it was 200hz not 200km? The horn look to large to be 200Hz horn? Also, the tweeter look like has 3” typical tweeter has and the rest is just the La-horn negative opening. The caT[/quote]Iam sure that it is...
|
|
Hi guys, these do seem quite interesting, but much of the written hoopla i've seen is coming from some of the less interesting characters on another BBS. from a fairly capable system i heard last week, the S&B's set for maximum gain&nbs...
|
|
Yes, Paul, I did not think this way but you are very correct. Technics TT, Denon 103 cartridges, Fostex speakers, “single girl with balalaika” music and Adcom CD players are kind of come along all together very well. It is not that I have something t...
|
|
Hi Romy and GuyI've been checking out various plinths for my new DIY project. The project's base is a Technics Sp-10mk3 motor unit.When you say a materials 'frustration' I guess you mean the choice of alloy and the quality of the casting? Inproper ca...
|
|
I believe a lot of the issues with earlier DD tables was that they were all servo controlled. That is, a feedback loop kept the average velocity constant. As a musical passage of complexity would slow the platter, the loop would respond w...
|
|
Guy, I have used a Technics DD and thought about the lathe/DD connection. Then I thought about the idea of various transducers, from microphone to cutter, to stylus and speaker, and I wonder if TT/lathe is a similar case, where s...
|
|
It's a pisser, all right, but a high-demands, OCD hi-fi nut might "realistically" spend years trying to get the most from a "serious" TT/arm/cartridge rig. IMO, most people are probably better off with something "easy to use", if that is not an ...
|
|
To Antonio,
it is not necessary to “to find some mat with those characteristics of yours”. The characteristics of mat would be applicable only I context of the TT you use (platter, suspension and so on). With my Micro 8000 that has very dead soundi...
|
|
[quote user="Romy the Cat"]Anyhow, start to record and you will love this processor even more.[/quote]I'd love to give this a go... I just need something worth recording!I have a good FM antenna on my roof and a half-decent tuner in the guise of a Ro...
|
|
I have owned and played with a couple of "classic" idler-driven TTs, but I was very young at the time, and incapable of pushing the design then, even if I'd wanted to. As it happened, I abandoned the idler TTs for a belt-driven Rek-O-Kut "broadc...
|
|
It is entirely possible to buy a good flat CU-180. I have two from eBay there were correctly advertised as being flat. I have also seen them on eBay as being "slightly bent". Those you avoid.But I agree that a replica is a real possibility. I never s...
|
|
Coops, do you have any personal observations or ideas about the ultimate TT, or are you already invested and just checking my credentials? I would like to know your thoughts, too, based on your own personal listening habits, preferences an...
|
|
[quote user="Romy the Cat"]
... Although he likes the sound of it but he reported that the TT I very much tend to change Sound with any slight modification of millions different parameters...The Cat[/quote]about its sonic quality...That is a well ...
|
|
[quote user="Doug Eisemann"] I have stopped by your site from time to time over the last year to see what interesting things have been going on. I generally do not say much, however I finally decided it was time to register and add a few commen...
|
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
|
Last 24-hours posts: |
2 |
|
 |
|
|
Total human visitors: |
43,285,191 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pasquini, Bernardo (7 Dece»
|
|
Purcell, Henry (7 March 16»
|
|
Tárrega, Francisco (2»
|
|
Godowsky, Leopold (13 Febr»
|
|
Karg-Elert, Sigfrid (21 No»
|
|
Martin, Frank (15 Septembe»
|
|
Rathaus, Karol (16 Septemb»
|
|
Paciorkiewicz, Tadeusz (17»
|
|
Simpson, Robert (2 March 1»
|
|
Williamson, Malcolm (21 No»
|
|
Gudmundsen-Holmgreen, Pell»
|
|
|
|
|
|
|