|
|
| Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
 |
|
|
|
|
|
Not that I have a lot of patience for audio, but I finally ran out my allotment for the effing shielded phono cables when the clock sounded 12 before I figured out a quiet grounding scheme. On the up side, I cleaned and re-greased all the contacts f...
|
|
I think it needed to be expended what I mean by “new smart layout of the power cables”. What you run a large system than you have many circumstances when power cables cross signal cables. Not only that. The PDO cables are liquid filled and they do no...
|
|
I think it needed to be expended what I mean by “new smart layout of the power cables”. What you run a large system than you have many circumstances when power cables cross signal cables. Not only that. The PDO cables are liquid filled and they do no...
|
|
I need to note that the methods that Purist uses are superbly powerful. A few years ago, inspired by what POD does I did number experiments damping cables with liquid. It is astonishing how sound was affected with different liquids. I was running at ...
|
|
Yes, the last cap of power supply much be on the side of load as it shell have a short path to ground. Without it you will have “less bass”, more crosstalk in case it is a stereo amp with single PS and a few other negative things.
With cables is mor...
|
|
If you read my site or talk to me then you know that I am very much not a proponent to dummy idea of balancing specific problems of playback system by using specific complimentary cables. I always tend to use individually neutral components with ...
|
|
Looks like this cable thread is about cables for FM (a particular FM set-up, actually...). And why not, since a given cable will certainly affect the sound we get from our systems according to how we use it? Even the "professional reviewers" unders...
|
|
Yeah, the power cord was nothing special. The Shunyata cord PLUS the Hyrdra conditioner represent the single best upgrades to my system aside from John's mods. I was skeptical about power cords and conditioners, but I'm a bit of a fanatic a...
|
|
Dear Romy, What is your opinion about silver cables drdna suggested (http://www.laventure.net/tourist/cables.htm)Armen...
|
|
Glad to hear you finally went and did IT! Now let's see (hear) how buffered per-channel level-set resistance works with the per-channel curves, and how easy this is to tune and integrate per total (stereo) side. It seems like this pretty much "has t...
|
|
Adrian, is the room raised floor or a slab? If the former, then wall-mount makes sense, especially for a TT. If slab, then you have more options, as far as spreading things around. Soft carpet or hard flooring factors, too. Yo...
|
|
I have been adding and reconfiguring gear recently and I will be needing a 6' digital cable very soon, when I add batteriy power, so I just went ahead and bought one of the "Synopsis" remainders Romy mentioned.This $5 discontinued Belkin blue ca...
|
|
When I said “cable” then I meant whatever cable might mean, the sonic qualities and whatever comes with it. You cartridge with it 2mV drives a cable to a transformer, for instance 1M that has impedance, capacitance and so on. The transformer has 26dB...
|
|
This is not as simple question as one might think. If a person embrace DSET topology, let for instance to take my example of 6-DSET channels, then what to do with cables that feed the DSETs? In my case I use one interconnect between preamp and DS...
|
|
Tim, the cable loading is not what I meant. Purist does like higher current across the cable but which cable does not love it? Dave Clark described very well some of the aspect of usability of POD cables (like disturbance). Some of them he left out. ...
|
|
The Big Secret of Cables is a fact, well know fact BTW, that electricity does not flow in cable but rather within an electromagnetic field around the conductor. The cable’s nearfield (let say 2” around a conductor) is as critical environment as the c...
|
|
[quote user="RonyWeissman"]Attentuators plugged directly into the RCA jacks sounds like good solution for balance control[/quote]Do not forget that you do not need the attenuators but juts one attenuator that you would plug on right OR on left. Also,...
|
|
[quote user="slack key"]I know that speaker position and room acoustics are important. I use a laser to align the speakers, room treatments, hallographs, crystals, ionizer, Z-sleeves, bybee filters, etc. I also have power conditioners, installed de...
|
|
Considering the employments I would like to make in my installation after the floor will be done and the system is re-assembled I am very much thinking about some kind of new cable management solution. I have 21 powered components in my playback syst...
|
|
This is very ugly topic as I have been looking a solution for years and I do not have a consensus with myself regarding this. I have 21 AC power consumers in my playback. Well, the 21 that require good power, another 8 might be plugged to the utility...
|
|
Paul,
I've see the post you referenced today, and I am still thinking about cable construction:
UP-OCC Copper or Silver Wire[1,2,3] -> Wax (or Oil) -> Cotton Sleeve -> A...
|
|
Dear Drdna, I red with interest about your experience in cables would you please give us more info. As I 'm sure many audiophiles are tired of spending $10000000000for cables which actual material cost are $0.00000000000001!Armen...
|
|
Dear Romy, You got me wrong I perfectly know that value of many things are not the sum of materials which they are made of, otherwise you could buy Mona Lisa for couple of bucks. The point I tried to say is usually cable manufacturers-and others in a...
|
|
Still being pissed that my second arm/cartridge does not sound as good as my first one I decides to get another phono DIN-RCA cable – I have my reasons to be suspicions now about my kinky Micro Fat cable. So, talking about different manufacturers som...
|
|
Rich,I have been experimenting with true Litz magnet wire (we use it in our transformers occaisionally) and have discovered that you can use discreete amounts of plastic dielectric material, spaced down the length of the wire, to "tune" the dynamic c...
|
|
I have my amps open and made safe from the cats diddling or so I thought.One day, I am listening to the system and reading a book.I heard a loud thud and looked up.There was my poor cat, on its back with all of its paws pointing to the ceiling an...
|
|
Paul, o/
apparently you use Neotech cables (under another brand), I would like to ask you if you have experience with their rectangular cables and if they have a specific (interesting) sound?
...
|
|
Paul,
Not the company I've referenced before (the one I forgot the name) but I just remembered of `Supra Cables` from Sweden. I had a look and their connectors are "24K Gold plated Copper". Apparently they are sligh...
|
|
Robert Levi from Positive Feedback posted a review about a new company from California – Wywires. The company reportedly does custom cables. It picked my interest on multiple levels. Since Purist went down in quality I do not have a cable supplie...
|
|
[quote user="glaesemann"]I think we know why Purist does not send out refill kits. For the same reason HP and Canon do not send out ink refill kits. [/quote] You are incorrect. Diminus comes with lifetime warranty and Purist refill own cables for fre...
|
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
|
Last 24-hours posts: |
1 |
|
 |
|
|
Total human visitors: |
42,559,284 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carissimi, Giacomo (18 Apr»
|
|
Berger, Ludwig (18 April 1»
|
|
Schnyder von Wartensee, Fr»
|
|
von Suppé, Franz (18 »
|
|
Roger-Ducasse, Jean (Jules»
|
|
Respighi, Ottorino (9 July»
|
|
Rozsa, Miklos (18 April 19»
|
|
Kennan, Kent (18 April 191»
|
|
Lauro, Antonio (3 August 1»
|
|
Bank, Jacques (18 April 19»
|
|
Willsher, Peter (18 April»
|
|
Greenberg, Robert (18 Apri»
|
|
|
|
|
|
|