| Search | Login/Register
   Home » Horn-Loaded Speakers» Macondo’s lowest channel. (151 posts, 8 pages)
  Print Thread | 1st Post |  
Page 5 of 7 (151 items) Select Pages:  « First ... « 3 4 5 6 7 »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Macondo Alternation. Extending the LF line-array..  Macondo and not only Macondo positioning...  Horn-Loaded Speakers Forum     8  145801  10-29-2005
  »  New  Macondo Horns: biography...  Macondo with Pussy Eyes....  Horn-Loaded Speakers Forum     2  61031  05-18-2005
  »  New  Macondo's Axioms: Horn-loaded acoustic systems..  A link to another thread....  Horn-Loaded Speakers Forum     120  637954  07-29-2007
  »  New  Midbass Horns and Real Estate...  Just a youtube video......  Horn-Loaded Speakers Forum     247  2062228  07-26-2009
  »  New  Macondo’s Midbass Project – the grown up time...  Vitavox 15/40...  Horn-Loaded Speakers Forum     455  2839207  05-20-2010
  »  New  Superbly interesting effect: Suspended decoupled floor ..  Superbly interesting effect: Suspended decoupled floor ...  Playback Listening  Forum     0  17309  10-08-2010
  »  New  Bass impact on Turntable: how to estimate objectively..  I have done some work on this in the past....  Analog Playback Forum     4  45332  11-01-2010
  »  New  The meaning of lowest octave...  Vibrational bass...  Playback Listening  Forum     1  23264  05-18-2008
  »  New  The tapped horns: cons, pros and Sound..  Danley DTS-20....  Horn-Loaded Speakers Forum     57  666487  04-23-2009
  »  New  Monophonic bass: myth and reality...  I do not think so but I am OK with it....  Audio For Dummies ™  Forum     5  44086  04-17-2011
  »  New  The BEST bass cable?..  Dialectic biased cable....  Audio Discussions  Forum     4  42308  04-22-2011
  »  New  Sound from behind a window...  Sound from behind a window....  Playback Listening  Forum     0  14358  04-24-2011
  »  New  Getting more power from SET vs. properly distorting SS...  Sound Board...  Audio Discussions  Forum     4  47258  05-09-2011
  »  New  Impulse response, short notes and midbass horns...  A possible solution to better impulse?...  Horn-Loaded Speakers Forum     14  123092  06-13-2011
  »  New  Constructing LF modules to the limits..  The little glory of my small woofers....  Audio Discussions  Forum     54  465661  04-28-2009
  »  New  A slightly crazy idea for a new approach to LF..  I do like it conceptually......  Horn-Loaded Speakers Forum     2  23364  03-30-2005
  »  New  Another time aligned 5-way horn project..  Thread moved...  Horn-Loaded Speakers Forum     189  819223  08-12-2015
  »  New  The ULF cannel for my new listening room...  The Organic Bass vs. ULF Drivers...  Audio Discussions  Forum     43  116345  07-29-2018
04-06-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 101
Post ID: 15941
Reply to: 15937
Ok, I got the bass amp…
fiogf49gjkf0d

Since my B2 ULF power amp will be long time to fix then being a compulsive person fully suffering from Dostoevsky Complex I bought another B2 amp to keep the blood flooding in my playback. Surprisingly it was no my decision but I got advise from Wagner.

Before the amp blew up I was listening Das Rheingold from mid 50s. It was celebrated recording by Georg Solti /Wiener Philharmoniker. Besides very good performance (George London and Kirsten Flagstad to name a few) it has phenomenal sound. London (the label) recorded the opera in studio specifically with objective to demonstrate the capacity of new stereo medium and to convince the consumers to buy stereophonic equipment. Before the B2 blew up I was playing the first act and it was let say ”loud”.  The people who were in my house know that I generally play loud – because my playback can – and the Rheingold that was playing was very loud – how else can you play Wagner. In a few hours the amp blew up and the next day I was playing the Rheingold again.  Now the loud play was not as much fan – without ULF Sound was dry and was more like Verdi Sound instead of Wagner

I realized that I need to bring my ULF back ASAP and that I have no patience foe experiments with other amps.  I also found a technician who most like will look at my burned B2 and will try to fix it, otherwise I will keep it for spare parts… So, my infatuation with audio lately turned into me sitting at my driveway and hallucinating about  coming UPS truck with my new B2 power amp. It’s it, unit I get my B2 replacement I will be wearing brown underwear…

The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-16-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 102
Post ID: 16063
Reply to: 14457
How much power do I need for my ULF.
fiogf49gjkf0d

This is kind of funny. I got another B2 amp a few days back. It was near new condition, at least inside. As I plug it to drive my ULF I felt that it produces some kind of strange bass. I did not like it at all and it was very different then what I got from my broken B2. I looked at the scope what my second B2 does with 5V input signal. I had some odd distortions. Sucks, the amp need to send to fix it….

I pull from basement another cheap consumer amp. I did test it on a bench and it was working very fine, clipping with 10.6V and running flat down to 12Hz. I figured out it will be fine as a temp solution and I put it in the system. It worked fine but the character of ULF was not even closed to B2 and very far from where I would like it to be.

What however took my interest was that this new consumer amp, along with B2 had very precise meters and they do not run even at ¼ of the full power at the new amp. On B2 they did not run even at 1/6 of full power. The new amp it 50W SS Hitachi or something like this. So, I asked myself how much power do I need for my ULF?

The question is very much important. I am under presumption that I need over 100W, preferably more to drive my LILF line arrays. Back in the Milq forum I have couple threads dedicated to an idea how to get a lot of power from LF DSET:

http://www.goodsoundclub.com/LatestPosts.aspx?ThreadID=2136

http://www.goodsoundclub.com/Forums/ShowPost.aspx?PostID=5200

Still, if in reality I need only 20-30W then I am very much in the realm of paralleled 6C33C that would be very easy to do. I reality I do not know how much power I need in my new room.

In my old room I knew that my Milq LF run securely in A1 but then room was much smaller my woofer array were larger.

http://www.goodsoundclub.com/Forums/ShowPost.aspx?postID=6057#6057

I need to do the same test with my new room. Frankly I feel that if wood be able to beef up my woofer towers with 8 drivers per channel and to use a dual 6C33C out then I will be able to make a phenomenal ULF  DSET. I just need to evaluate how much power I would need and would 35W-40W that I can get from a pair of 6C33C enough.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-18-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 103
Post ID: 16094
Reply to: 14457
A True ULF - what an amassing tool!!!
fiogf49gjkf0d
I have been running now a digital crossover at 20Hz, 3th order with some kind of shitty power amp. The digital crossover has a remote control. I would not say that I like the quality of my ULF but I am telling you that True ULF implementation is absolutely stunning tool to write own Sound in own room. The key in the True ULF implementation is to run ULF so low that change a few dB of ULF’s output shall not affect auditable sound. If you do not have this provision in your playback then I might want to try it with some kind of good consumer subwoofer. Besides the mitigation of sonic softness in room the ULF volume riding allow to moderate so many listenable properties! I truly do not invasion my playback nowadays without ULF. Try it is you didn’t.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-22-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 104
Post ID: 16139
Reply to: 16094
Put Marchand Crossover into the game.
fiogf49gjkf0d
I had in my basement Marchand X26 crossover that I use over 10 years back. Since my B-2 power amp with passive filter is being fixed I setup the stock fixed B-2 with external Marchand active crossover.  I spent some time to modify the Marchand X26 big difference!) and built in it the 20Hz filter, 18dB per octave.

Interesting effect, the Marchand has own bass. Surely it is not at clean as my passive filter. Bass is more “round” with more second harmonics. I would say that I like it less for ULF but it feel that more seamless sound with my horns. I also dropped crossover point from 27Hz to 20Hz, or driving the B-2 a bit harder I effectively added the ULF out from my bass towers.

The result is good, I do not make any observations of active 4-stages Marchand vs. my line-level passive, I would need time to do, but it is not my objective. The Marchand is a temp solution anyhow. Still Sound is spectacular.  Tonight is the day of Bella Bartok. I am playing the magnificent Geza Anda take on Bartok’s piano concertos. It is a celebrated Ferenc Fricsay play with Berlin Radio Orchestra from 1960. The second concerto is something that had recovered me today from Hildegard von Bingen’s music.  The last movement is the second concerto I decided to turn the ULF off. The room is collapsed into itself…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-04-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 105
Post ID: 16208
Reply to: 16139
I begin to like my active crossover.
fiogf49gjkf0d
I am observing an interesting and surprising fact – I am begging to like my active Marchand crossover. I did a number of modifications to it and it looks like the parts are broken-in now – it does sound very pleasant for my ULF. I feel it is a bit too soft then I would like to have in my final version and I will go for line-level passive what my second B2 will be fixed but this slightly tweaked Marchand today showed off some spectacular result.  

I had today a VERY interesting Erotica’s funeral march, played with so much complexity that I thought that Marchand will lose it. To my surprise the Marchand show off very extravagant ULF sound. The slight of softness of Marchand tubes combined with very idiosyncratic bass of old Brunswick orchestra made some spectacular sounds, truly addictive…

Marchand X26.JPG

Who knows, if to spend some attention to this active crossover, perhaps to put better tubes in then it might be a nice devise to use all time. The way how delicate it opens notes is still in my head….

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-06-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 106
Post ID: 16213
Reply to: 16208
Line-level passive vs. active ULF filter
fiogf49gjkf0d
My sub-bass amp is back but I am not sure if I am comfortable with it. The guy from QAudio did a wonderful job to fix my modified B-2 power amp and now I have my amp for ULF with passive line level filter in it. So, Now I have two identical, fully functional B-2 power amp, one with line-level passive filter and another is with active filter. Of close the passive line level filter is way more preferable option but there are some “issues”. When I removed the active crossover and went to line-level passive then I got better very lover bass but I am not sure if I got better Sound. The ULF from line-level passive is more dynamic and more articulate but in a way more I would say “electronic”. The bass from active crossover is more lush, has more second harmonics and more organically tight with Macondo, even thought the ULF itself is not as “impressive”. I am sure that I will be looking more into it but as not it is not clear to me what is going on.

Most likely the answer is that with line-level passive I use “crooked filter”. It has 3 sequential first orders but the circulation of them a bit different as they work all together. With my active crossover each filter acts individually properly and do perfect Bessel curve. It might be the constitutive effect of the tubes in the active crossover - they are 12AX7 use as cathode followers. The 12AX7 not the best tubes for the application – I might play with it but I truly would like to get rid of active crossover. The line-level passive for sure more load my preamp-s, this is what I keep the first resistor high and the input impedance over 25K. The active crossover has input impedance over 1mR, so the preamp does not even acknowledges it. Remind you that my preamp driver 7 channels per side and each channel has input filter – a VERY heavy and very complicated duty.

Line-level passive vs. active.JPG

Anyhow, I need to revise what I do in order to make my line-level passive to work, or more properly to say to sound more to my liking. I am sure that in one way or other I will eventually come to it and will find a proper configuration but it requires apparently having some initial pain….

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-06-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 107
Post ID: 16218
Reply to: 16213
Hm, there is no way to escape the 4th order.
fiogf49gjkf0d
After much listening and measuring I convinced myself that there is no way for me to escape the use of the 24dB per octave slope if I want to keep the sound of my midbass horn not violated.  I also have to admit that I will not be able to render 4th order filter at line level passive. So, I will be building the 4th order ULF low pas filter for my modified Marchand unit and probably will be looking ways to further improved the sound of that crossover.

I have to say that even I do like how the sound of my filter with Marchand gets integrated in with the entire Macondo sound but I do not like conceptually that to write my ULF filter I need 4 active stages, particularly with low current tubes like 12A7 used and cathode followers. Funny, I do like sound (it sound in a way like Ear phonostage) but I do not like it as design idea.  It is not to mention that I sometime keep my ULF all time on and to have tubes running all time does not make me too comfortable. I would need more elegant solution for the 24dB crossover or need to find a way to stick it somehow inside the power amp between the stages. It is bad that I do not know SS amps and can’t not do it myself. Are any person would like to get a small job to do it for me?

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-07-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 108
Post ID: 16223
Reply to: 16218
Phase butterfly effect.
fiogf49gjkf0d

Ok, I did try the 4th order filter and it did not sound as I wanted. The 3rd order is right slope foe my room but I need to go for custom filters separately dedicated for right and left channels. The problem is my right channel with the attached to use equipment mini-room create a huge 10dB inflow at 65Hz that screws up output of my midbass horn. My midbass horn still in my estimation produces the “proper bass.” The ULF does offer a LOT of very important benefits but it compromises my midbass. If I will be able to defeat let say narrow 6dB at 65Hz then I will be able to get great and proper sound.  As now I have phase butterfly effect – this needs to be addressed.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-07-2011 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,570
Joined on 10-12-2006

Post #: 109
Post ID: 16224
Reply to: 16223
Back to DSP?
fiogf49gjkf0d

Maybe the short cut to customize-able LF curves these days is DSP, at least until you figure out exactly what you want in the way of attenuation?

Best regards,
Paul S

05-07-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 110
Post ID: 16225
Reply to: 16224
What I am trying to accomplish.
fiogf49gjkf0d

For a casual observer it might appear that I am constantly fought with my ULF, finding and loosing better and worse configurations.  It might be so but I have a very strong sense of objective of what I would like to accomplish. I want to reinstate that Sound in my room what I was injecting +20dB at sub 20Hz in my room. However, I would like to do it in a way that under any circumstances would smear my midbass.

Ironically to raise the order of ULF filter and to add volume does not work. It has to be, for some reasons, 18dB per octave and the key is to control the slop of that roll of. This is what I will be experimenting now, I know that I will find the solution as I have very strong visualization of what I need to get as the result.

I have much option on the table. The DSP is one of them. I have Velodyne SMS-1 and I need to do the action only on one channel, so I might use it. I have another digital parametric EQ that I might use. I might implement notch filter and correct the slope’ bump. (Here is a homework for you: why I religiously against notch filters but feel that it will work fine in my case). There is a few other options, I will examine them.

Actually the bigger question to me is why I like the Sound after my tube active crossover more than with line-level passive filter. The ULF IS better quality with line-level passive filter – I can testify it. But the ULF after the 4 stages of active tube filter make the ULF to sound that same as it come from the rest of the system – lash, measured and super polite. It does not have that thrilling ULF slam but it does not exist in real life ad well and I am trying to run as far from it as I can.  The ULF after that tube crossover is very pleasurable and listening I would quests that I have SS amp doing bass.  In way the tube crossover as my SS Yamaha B2 amp make the ULF amp to sound more similar to Milq. I personally feel that it has to do with characteristic distortions of 12AX4 in tube crossover – I happened to LOVE it in my “End of the Life Phonostage”. It will be VERY funny if I decide to stay with this tube active crossover as final version.

For now, after a few day of listening with line-level passing I voluntary took it off and switched to tube active. It gives me a feeling as I am sitting at the table and do something and somebody performs a foot massage on me…  I am listening now the live broadcast from Symphony Hall with full production of Berlioz‘s Roméo et Juliette, Charles Dutoit leads BSO and Tanglewood Festival Chorus. I did not have time to calibrate my active crosier and set it up by pure intuition. I know that upperbass a bit eaten by my phase bitterly on right channel but the whole sound of the Symphony Hall is amazing.  With this ULF injection the whole room is breathing with sounds and I have absolutely no feelings of bass excessiveness. Just wonderful! I raise my glass to Karl Leonhard!

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-08-2011 Post mapped to 2 branches of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 111
Post ID: 16228
Reply to: 16225
The art of ULF volume adjustment.
fiogf49gjkf0d

 Romy the Cat wrote:
For a casual observer it might appear that I am constantly fought with my ULF, finding and loosing better and worse configurations.  It might be so but I have a very strong sense of objective of what I would like to accomplish. I want to reinstate that Sound in my room what I was injecting +20dB at sub 20Hz in my room. However, I would like to do it in a way that under any circumstances would smear my midbass.
Ironically to raise the order of ULF filter and to add volume does not work. It has to be, for some reasons, 18dB per octave and the key is to control the slop of that roll of. This is what I will be experimenting now, I know that I will find the solution as I have very strong visualization of what I need to get as the result.

I have much option on the table. The DSP is one of them. I have Velodyne SMS-1 and I need to do the action only on one channel, so I might use it. I have another digital parametric EQ that I might use. I might implement notch filter and correct the slope’ bump. (Here is a homework for you: why I religiously against notch filters but feel that it will work fine in my case). There is a few other options, I will examine them.

Actually the bigger question to me is why I like the Sound after my tube active crossover more than with line-level passive filter. The ULF IS better quality with line-level passive filter – I can testify it. But the ULF after the 4 stages of active tube filter make the ULF to sound that same as it come from the rest of the system – lash, measured and super polite. It does not have that thrilling ULF slam but it does not exist in real life ad well and I am trying to run as far from it as I can.  The ULF after that tube crossover is very pleasurable and listening I would quests that I have SS amp doing bass.  In way the tube crossover as my SS Yamaha B2 amp make the ULF amp to sound more similar to Milq. I personally feel that it has to do with characteristic distortions of 12AX4 in tube crossover – I happened to LOVE it in my “End of the Life Phonostage”. It will be VERY funny if I decide to stay with this tube active crossover as final version.

For now, after a few day of listening with line-level passing I voluntary took it off and switched to tube active. It gives me a feeling as I am sitting at the table and do something and somebody performs a foot massage on me…  I am listening now the live broadcast from Symphony Hall with full production of Berlioz‘s Roméo et Juliette, Charles Dutoit leads BSO and Tanglewood Festival Chorus. I did not have time to calibrate my active crosier and set it up by pure intuition. I know that upperbass a bit eaten by my phase bitterly on right channel but the whole sound of the Symphony Hall is amazing.  With this ULF injection the whole room is breathing with sounds and I have absolutely no feelings of bass excessiveness. Just wonderful! I raise my glass to Karl Leonhard!

I am thinking how much volume of ULF a person need? This is a tricky question as with this tube crossover the ULF when it overload he room it for whatever reasons does not produce a typical bass overload effect.  I can slide over let say 10dB and the sound is perfectly listenable.

For now, without going digital, I have settled with 3rd order filter on left and 4th the order on right. I also run the right ULF 2dB louder then left.  To use different filter on right and left channel sound logical to address the ULF asymmetry of my room but it was a bit strange sounding at beginning. Eventually, when I discovered the need to drive the channel with higher order hotter it straights itself up.

So, I am taking that I can run ULF 10dB up and down and had not much impact to sound and at the same time I am very picky about 2dB right channel to be louder then left. What I am talking about then?

Well, this is the tricky part.  ULF serves not only lower extension of my Sound but also is acts almost as a delay channels, extending the reverberation time in my room. If the contribution of ULF in auditable sound might be very much tolerated to a large degree then the moderation of reverberation time is in my view need to be set more or less accurately.

Listening how ULF deal with decays in my room requires totally different type of listening. The room might dissipate only so much bass and so much infra bass. Pumping the room with ULF a create a critical mass of infra bass and further increased of it has no positive effect to auditable sound. This ULF level of saturation is very important as my ULF channels is NOT true ULF but it has SOME touch in auditable bass. So, the objective is to set the right level of auditable lower octave but in the same time to pump the room with max amount of ULF, under the level of room ULF saturation. This is what the slope of the filters and volume controls at each ULF channel become the tools of action. It is VERY interestingly that the “right level of auditable lower” with tube crossover is flexible but the right level of ULF saturation is very picky. With line-level passive filter and only SS amp it was in reverse: the “right level of auditable lower” was very demanding but ULF saturation level was very flexible. It is very interesting phenomena, read again to understand is and do not ask me about the reason – I do not know the reason.

So, what to listen while adjust the critical level of ULF saturation, or effectively the reverberation time on listening room? This is very good question. You will not always will be able to do it by the ambient sound of recording, even if you know the recording very well. What I suggest to do is to use tempo as the reference for reverberation time. Get a good recording of a good organist that you trust playing let say Bach. Max out your ULF and play Bach. The room will be too “long” and soon you will feel ( if your organist is a good one) that Back is being played slower than it has to be for the sound of your room. Close your eyes and listed the tempo with witch the notes are opening up. Pretend that you are the one who play it. Continue music to play but stop listening it and set your own tempo in your head with the respect to the reverberation in your room. Not begin to shorten your ULF output db by dB until your own feeling of right tempo will be absolutely identical to the tempo your organist. You need to be able to spell out loud the Bach notes with no timing discrepancies between the expressed tempo of your organist and your own feeling of tempo in your listening room. If you have a mute switch then it is very convenient to mute the sound, to continue with Back in your own tempo and then bring sound back. If you have good listening expertise then you do not need mute switch and can do it by singing the notes louder then sound of recording, or juts do the exercise in your mind.

Your objective shall be your absolute agreement with tempo of your organist.  You might disagree with his tempo but you need to have your own reasons why you or him did what you both did.  You might use not organ but a well recording piano but with piano recording there is a danger. Many piano recordings are vandalized by idiots sound engineer who inject into recording artificial sound reverberations and a mix from microphones installed inside the piano deck. It is bad as it is but the idiots do all of it after the pianist played, so those recordings has no human-induced and artistically-measured relation between reverberation and tempo.  It looks to me that the idiots do not temper so much with recordings of organs.

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-10-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 112
Post ID: 16233
Reply to: 16228
Sitting on a fence with ULF
fiogf49gjkf0d

I am not sure that I am at final stage of my ULF wondering. I do like the integration-free problem of my ULF via tube crossover. I am a bit concert that I am injecting now + 9dB at sub 20Hz and do not feel that I have too much bass. I am a bit more concerns that with use of tube crossover I lost “some” thump in lowest bass, particularly at very high volumes.  The softening of the very last pinch at the very low end in no way annoying or even noticeable in most cases but there are some moments where it is necessary. It is like walking in fog – you need some black object to see in order to recognize how dance your fog. Yes, I am taking about the 8 symphony, fourth movement of guess who?

I would like to have that prodigious slam of that drum but at the same time it looks like the amp that can deliver it do not have the harmonic intelligence that I need from ULF. Well, I need to live with my current ULF for a while. Perhaps I need to re-tube my crossover as I do not think anything is left in it to modify…. If perhaps I need a deferent power amp. I am feel sadden that I sold my Lamm M1.1 amps – for high power they delivered very good bass – it would be interesting to try the M1.1 now in my ULF.

Still, I am a bit wondering why I am so attracted to that soft version of ULF.  I wonder how other people would react to it – to the high power ULF channel with, soften by tube crossover. I do not think that audio people generally hear something like this. Tomorrow an audio guy that I know will be arriving in Boston to hear my new playback results. I wonder what will be his reaction to my new ULF implementation.  I wonder become it is different. Pit is this way my ULF is “softer” then the sound the rest of Macondo, this mostly never happens with playbacks and to hear this type of setting a bit strange but interesting. I wonder what will be his reaction and if he will be able to understand of what is going on.

The playback with ULF doe not sound bad but the elective softness of ULF makes the feeling from this sound a bit different. It reminds me walking across a swamp or deep snow. First you spend efforts to pull your legs from swamp but as you get use to then you can walk and do what you do without paying too much efforts to the fact that each of your step is an effort. With my overly soft ULF it is in way the same:  listening,  you need first to get that feeling of that excessive in size but warm and fuzzy ULF. You need then to learn how to ride that ULF, literally how to lie relaxed atop of the bubble of ULF and let the ULF to drift you. Then mind observers that cloud of ULF is not only thing in the room and that there is a lot of more sounds in the room. The cloud of ULF acts as a metaphysical sustained pedal-point above which all the rest music grows. The softness of that pedal-point is key in my mind as the ULF cloud  is not auditable in normal sense. An interesting effect indeed…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-17-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 113
Post ID: 16276
Reply to: 16233
The overly-swallowable bass.
fiogf49gjkf0d
I still have no absolute piece with my very lower bass not because I do not like it – I do like it very much but because I do not know if I want to do anything with it. I have over the last 2 weeks 3 quite expensed visitors in my room and I did explicitly asked them regarding their feeling about my lowest bass.  None of them expressed any objection and they loved it. I love it as well, even though I do have my objections, in fact one objection. Still, even as is the bass is very acceptable and very “ambassadorial”  I think I will look into it as time goes by but the existing overall softness of my ULF makes it so damn palatable that it is truely shame to touch it.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-18-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 114
Post ID: 16281
Reply to: 16276
To deLamminate my ULF channel.
fiogf49gjkf0d

It did not last long….

Just a couple days back I was thinking that I will live with my current lower bass for a while and now I feel that I will not.  I do not feel that my current ULF is wrong. In fact I feel that it is truly superb but I would like to add to it one character, still without losing what I have.  I do not want to change my lower bass but I would like to a very very very very very very minor degree to add some SS hardness, still preserving all long and beautiful LF harmonics that I have now. I am sure that no one would recognize it but I do. I do have some kind of nostalgia to my bass in old room. Even though in my current room I have in a way better a sound and better lower bass but I need to deLamminise my lower bass. My lower bass now has the quality that I did not like in Lamm ML2.0. With all phenomenal integrity of Sound in that amp it did not sound hard when it called upon. I was forced to idle the Lamms output stage very aggressively but then Lamm has no power when it drove 32R with 4R tap. Even in that configuration it was too polite. Milqides and then DSETing long change it but now with 4 stage Modified Marchand tube crossover and B2 amp I find myself in the same boat. I have very-very good bass but if music is called to rock-hard stress of the very leading edge then my ULF handle it a bit overly elegant.

So, What I am planning to do it to revise my Marchand crossover further. Here is the plan:

1)      Get rid of input stage and let my preamp to drive the filters directly.

2)      Get rid of output stage, moving the attenuator to the power amp.

3)      Slightly add current to the remaining 2 tube, dropping grid resistors from 180K to 160K

4)      See what happened then

I will get rid of half of the tubes and it might do the trick. I also consider using 6N6P instead of the 12AX7 as they might be better in cathode followers. They have the same ping and just need 6.3V, since I will have just two tubes left then I might connect them in series and to use the default Marchand  12V power supply…

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-19-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 115
Post ID: 16288
Reply to: 16281
What a beautiful result!!!
fiogf49gjkf0d

 Romy the Cat wrote:

It did not last long….

Just a couple days back I was thinking that I will live with my current lower bass for a while and now I feel that I will not.  I do not feel that my current ULF is wrong. In fact I feel that it is truly superb but I would like to add to it one character, still without losing what I have.  I do not want to change my lower bass but I would like to a very very very very very very minor degree to add some SS hardness, still preserving all long and beautiful LF harmonics that I have now. I am sure that no one would recognize it but I do. I do have some kind of nostalgia to my bass in old room. Even though in my current room I have in a way better a sound and better lower bass but I need to deLamminise my lower bass. My lower bass now has the quality that I did not like in Lamm ML2.0. With all phenomenal integrity of Sound in that amp it did not sound hard when it called upon. I was forced to idle the Lamms output stage very aggressively but then Lamm has no power when it drove 32R with 4R tap. Even in that configuration it was too polite. Milqides and then DSETing long change it but now with 4 stage Modified Marchand tube crossover and B2 amp I find myself in the same boat. I have very-very good bass but if music is called to rock-hard stress of the very leading edge then my ULF handle it a bit overly elegant.

So, What I am planning to do it to revise my Marchand crossover further. Here is the plan:

1)      Get rid of input stage and let my preamp to drive the filters directly.

2)      Get rid of output stage, moving the attenuator to the power amp.

3)      Slightly add current to the remaining 2 tube, dropping grid resistors from 180K to 160K

4)      See what happened then

I will get rid of half of the tubes and it might do the trick. I also consider using 6N6P instead of the 12AX7 as they might be better in cathode followers. They have the same ping and just need 6.3V, since I will have just two tubes left then I might connect them in series and to use the default Marchand  12V power supply…


Yesterday I modified my Marchand tube crossover in accordance to what I described.  The result was exactly what I hoped, the crossover got slightly harder sounding – two unnecessary tube stages were gone. The Sound move the right direction but some of so harmonics I felt were not as sumptuousness wonderful as they were with 4 tubes.  It was however not only about the harmonics but rather about the mitigation between the accent of the leading edge and the decay.  I consulted with a friend of my and he advised to play with plate current of my 12AX7. Driving it up and down I end up with 157K cathode resistor, that gives 1.27mA. It is very nice result with a very accurate enunciation at the very pit of the very bottom end but with immediate and always spooky very smart release of the pressure. Very musical, very dynamic and very natural – simply beautiful!

They I played a bit with multiple 12AX7 tube that I have. When I had Lamm ML-2.0 I accumulated a Lot of 12A7 for Lamm’s first stage. Properly I have 30 different types. With Lamm I very much preferred Telefunken with smooth plate for MF and ribbed plate for bass channels (I multi-amped with ML2). Since it is ULF channel then the ribbed plate was the obvious candidate.  All Telefunkens are different, even of the same contraction and party by party sound different. All my tube were marked by sound (in context of ML2) and I find that it was no correlation how they sound in my crossover and in ML2. The best for bass tubes in Ml2 were too aggressive for my crossover; still it is nice to have it as an option. All together I turn out to like Russian made 12AX7WA. They are a bit muddy but it turns out works very nice with the plate current that I have settled.

Hm, I migh not need 150W DSET after all…

The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-25-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 116
Post ID: 16330
Reply to: 16288
Pipe Organ with 128' register in Augsburg, Germany
fiogf49gjkf0d




"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
06-11-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 117
Post ID: 16447
Reply to: 14457
An absolute must for ULF channel.
fiogf49gjkf0d
This for someone who do not use ULF might be considered as superfluous but I am going to tell you that that for me, the person who use ULF dally, it is an absolutely mandatory tool. The ULF channels have to have a good calibrate dB meter that in real time will show the strength of the ULF signal. My B2 amp has very good miter and I am telling you: it is very useful to use them. You will not HEAR the sound of good ULF channel. With a LOT of experience of ULF use you might get some feeling HOW ULF perform in context of entire system but only with very much know to you “calibrated” recordings. With good real time dB meter you will learn what your room/playback need and you can very fine tune (with precision of 1dB) what your ULF does.  Being spoiled with B2’s meter I can not imagine how I will use ULF without them.

In my case, where I have right and left channels different filters to track the ULF level would be very hard but with meters on it is very simple and very accurate. In fact to tune the ULF with meters and different filters is always like conducting of orchestra – you can set volume and character of Sound by different filters differently.  The conductor right hand usually manages beat. This is my 3th order filter – it sets the volume of the ULF and decay, aka the tempo of the entire presentation. The conductor’s left hand is all about the cue character, phrasing, dynamics, and small expressions. This is my 4th order filter – it fill the space of my 3th order filter but it adds some very fine infliction of the ULF phrasing. Since the different filters are in fact different ULF channels then need to work all together not only with each other but with the rest of the system. It will be VERY hard to set properly but listening the playback and looking what objectively ULF do I have become a master of ULF tuning just after a few days. Now, knowing HOW ULF shall sound I can just looking at the meters with 5 seconds very precisely tune ULF of my playback. VERY comfortable!!!

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
10-12-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 118
Post ID: 17134
Reply to: 14457
The compartmentalized bass
fiogf49gjkf0d

A few days back a local audio guy come to my place, heard some music and I played and said something that did not expect from his level of audio intelligence. (I wonder if it was the same guy who advised me to write a handbook “How to make friends 101”). He said that one of the most surprising things for him in Macondo Sound is that playback produces looks like a lot of bass but never go overboard.

Over the duration of the last year among the people who visited my room I have 4 individuals who expressed the very same sentiments in the very same words: they were surprised that with amount of bass Macondo is able to care it does not produce too much bass.  I think this requires a bit explanation.

We do judge bass upon I mistakes: the moments when it hits some kind of ugly distortions or too high output volume. If bass across the board too much but if it stays still accurate and even then it looks like we do not experience as much problems. Macondo does not output too much bass, in fact it is flat compare to MF. If some kind of wild things do happen in music then here is where Macondo’s bass accuracy takes control. What does it mean “bass accuracy”?

The bass accuracy is a tricky thing and it is very seldom achievable in the listening room. The “bass accuracy” implies the amplitude flat distribution of bass at the listening location with on relatively slow reverberation time. Most of the playbacks have just “bass”. It means a single channel that traduced LF, the channel in most of the cases is located right where he MF channels are. Since the bass amplitude at sub 150Hz is hugely depended from influence of listening rooms then it is self-explanatory that he bass results in listening rooms are very random. There are zillion ways to different degree to control bass, some of them more and less successful. Let take a look how Macondo deal with it.

Macondo compartmentalize the whole dangers bass on 3 individual channels: upperbass, midbass and ULF. Each channels has own amplification, own filter, own volume and own topological way to interact with the room. Then manipulating by each of the 6 bass individual channels Macondo made the total bass picture in the listening spot loaded but only to the point that “if it was extra ½ db then it would be too much”.  The most important that it is done by very natural means.

Sure one can very save even load across the entire bass by using digital room correction systems. Yes, some women prefer to deal with dildos instead of dealing with men. Still, I do not know any men who prefer to deal with a rubber woman…  The accuracy of bass in my view need to come along with tonal sophistication of bass notes and here is where digital room correction systems slip.

Anyhow, I would like to point out that compartmentalized bass to 3 individual channels give a LOT of advantage. I would like in fact it to be 4 individual bass channels but it will be probably in my next life…

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
10-16-2011 Post does not mapped to Knowledge Tree
decoud
United Kingdom
Posts 247
Joined on 03-01-2008

Post #: 119
Post ID: 17168
Reply to: 17134
Paralleled SET bass
fiogf49gjkf0d
I can see objections to using paralleled tubes to achieve higher power where the channel has a single driver, but surely where you have multiple drivers differences between the drivers themselves would render any disadvantage of using (say) one tube per driver negligible. So should not your ULF amp be simply a multichannel melq with 6 6c33c's, one for each driver, in parallel?
10-24-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 120
Post ID: 17219
Reply to: 14457
A new concept of ULF channel.
fiogf49gjkf0d
A guy visited me today and while I was playing to him some music an ides stroke me: how to make ULF channels invisible? I have given birth to a ridicules ides to make huge, 40hz, no-cheating horns in time-aligned position absolutely invisible in listening room. Some would say that it is impossible but I have done it and I am telling you it is a phenomenal feeling when Sound comes but there is no realization where it coming and the efforts of playback is invisible.

I would BS you if I say that there are “invisible speakers” in my room. Macondo’s MF horns island is visible but as it has very low horizontal footprint and the smart clandestine frame I do not feel that Macondo too obtrusive in the room. Macondo MF islands with all of it size are not too conspicuous in my room. There is very lucky proportion between the size of the speakers and the size and the room and I do not feel that room feels speakers-heavy. In my view Macono feels like it is flying in the room as it has no sharp corners – very good feeling. I can’t say the same about the woofer towers. They do not look ugly but they feel like… speakers.

So, I wonder if it is possible to come up with an idea how to have woofers, not the bass channels in normal sense but ULF channels that would be in the same time-aligned position, with drivers facing directly to the listening position but to take it a notch further – to make it invisible in the room? Any, even very stupid ideas are become.

The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
10-24-2011 Post does not mapped to Knowledge Tree
Jorge
Austin TX
Posts 141
Joined on 10-17-2010

Post #: 121
Post ID: 17220
Reply to: 17219
Infinite baffle
fiogf49gjkf0d

That is what I thought you were going for in the first place:
You have the basement right under your listening room, and those wonderful Aura 18" woofers...
You can place them sideways (very important) on some kind of vent that shoots into the room. That way if some liquid is droped it will go straight into the vent and not into the woofers.





10-24-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 122
Post ID: 17221
Reply to: 17220
A 4th order bandpass vibrator?
fiogf49gjkf0d
Thanks, Jorge, but what you propose and what is done at the pictures your posted has nothing to do with Infinite baffle. This configuration rather reminds me the 4th order bandpass. It is popular setting but it is not what I like as the bass coming from there uselessly more muddy then I wools like to have. I have a local guy here in Boston who runs with his playback dual Electrovoice 30” drivers, loaded in large front chamber and vent them via former air-conditioning vents. I very much do not like the bass he has. I think it is possible to experiment with it and to make it much better but only AFTER the holes in the floor are made and the room is modified. There is no way to test it and to get prove of concept before cutting to floors. Also, I absolutely hate any vibration coming via floor, something that I call bone vibrations. With this configuration my listening chair will be converted to a vibrator. I was thinking along the same line, like place the woofers in basemen in concrete floor and to vent them in the room via a wholes but I do not find the idea elegant enough. I would be more attracted to something more radical, fundamentally radical.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
10-25-2011 Post does not mapped to Knowledge Tree
noviygera


Chicago, IL
Posts 177
Joined on 06-12-2009

Post #: 123
Post ID: 17222
Reply to: 17219
ULF idea, possibly stupid.
fiogf49gjkf0d
But efficient (in terms of space usage) and radical.

put woofers in the sides of flare of your attic horns, sort of like Danley Synergy horn, not near the throat but towards the mouth area, using the attic as the infinite baffle.
But will the pressurization from the woofers effect the midbass driver performance? Maybe it's worth a try, it's reversible.

Herman
10-25-2011 Post does not mapped to Knowledge Tree
Jorge
Austin TX
Posts 141
Joined on 10-17-2010

Post #: 124
Post ID: 17227
Reply to: 17222
IB vs Horn
fiogf49gjkf0d
Unluckily I have no experience with IB,  would love to.  Any way If you want it hidden and time aligned,  the best bet is the uderground!
Now having all that space there it would be a pity not to go IB.
The IB idea can be much more elegant than the pic shown. 
One advantage is that you can almost pinpoint where you want it and just get your jigsaw to it! 

The main point would be if you decide to use your 18" woofers: You have two choices: to use a Vent type tunnel or mount the woofer on the floor looking up into a protective grid...  I dont know if a woofer going from 20hz down will sound different coming from a vent or from a direct radiator.
Any way the woofer can be mounted on a structure that can double as Vent and floor support,  or could even be detached mechanically from the floor in order to avoid such "bone vibrations". It can get as complicated as you need it to be.

Another idea would be to use some type of horn shooting from the basement:  Radical:  not shure about the time alignment though.  I guess one 18" woofer per side should be enough and let the horn do its job.  time align it properly and let it shoot upwards through a grid, so you can keep your winter view!





10-26-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 125
Post ID: 17232
Reply to: 17220
A Distributed Infinite Baffle?
fiogf49gjkf0d
How about this idea: to have sort of infinite baffle in PP configuration but to distribute it to the middle of the room as it depicted below?

Bass_Distributed_Infinite_Baffle.JPG




"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 5 of 7 (151 items) Select Pages:  « First ... « 3 4 5 6 7 »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Macondo Alternation. Extending the LF line-array..  Macondo and not only Macondo positioning...  Horn-Loaded Speakers Forum     8  145801  10-29-2005
  »  New  Macondo Horns: biography...  Macondo with Pussy Eyes....  Horn-Loaded Speakers Forum     2  61031  05-18-2005
  »  New  Macondo's Axioms: Horn-loaded acoustic systems..  A link to another thread....  Horn-Loaded Speakers Forum     120  637954  07-29-2007
  »  New  Midbass Horns and Real Estate...  Just a youtube video......  Horn-Loaded Speakers Forum     247  2062228  07-26-2009
  »  New  Macondo’s Midbass Project – the grown up time...  Vitavox 15/40...  Horn-Loaded Speakers Forum     455  2839207  05-20-2010
  »  New  Superbly interesting effect: Suspended decoupled floor ..  Superbly interesting effect: Suspended decoupled floor ...  Playback Listening  Forum     0  17309  10-08-2010
  »  New  Bass impact on Turntable: how to estimate objectively..  I have done some work on this in the past....  Analog Playback Forum     4  45332  11-01-2010
  »  New  The meaning of lowest octave...  Vibrational bass...  Playback Listening  Forum     1  23264  05-18-2008
  »  New  The tapped horns: cons, pros and Sound..  Danley DTS-20....  Horn-Loaded Speakers Forum     57  666487  04-23-2009
  »  New  Monophonic bass: myth and reality...  I do not think so but I am OK with it....  Audio For Dummies ™  Forum     5  44086  04-17-2011
  »  New  The BEST bass cable?..  Dialectic biased cable....  Audio Discussions  Forum     4  42308  04-22-2011
  »  New  Sound from behind a window...  Sound from behind a window....  Playback Listening  Forum     0  14358  04-24-2011
  »  New  Getting more power from SET vs. properly distorting SS...  Sound Board...  Audio Discussions  Forum     4  47258  05-09-2011
  »  New  Impulse response, short notes and midbass horns...  A possible solution to better impulse?...  Horn-Loaded Speakers Forum     14  123092  06-13-2011
  »  New  Constructing LF modules to the limits..  The little glory of my small woofers....  Audio Discussions  Forum     54  465661  04-28-2009
  »  New  A slightly crazy idea for a new approach to LF..  I do like it conceptually......  Horn-Loaded Speakers Forum     2  23364  03-30-2005
  »  New  Another time aligned 5-way horn project..  Thread moved...  Horn-Loaded Speakers Forum     189  819223  08-12-2015
  »  New  The ULF cannel for my new listening room...  The Organic Bass vs. ULF Drivers...  Audio Discussions  Forum     43  116345  07-29-2018
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts