| Search | Login/Register
   Home » Horn-Loaded Speakers» The tapped horns: cons, pros and Sound (58 posts, 3 pages)
  Print Thread | 1st Post |  
Page 3 of 3 (58 items) Select Pages:  « 1 2 3
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Barn Conversion - James' Project..  The vintage vs. contemporary compression driver....  Horn-Loaded Speakers Forum     28  368244  02-04-2007
  »  New  About bass horns by Johan Dreyer..  There are lowest bass horns and there are not lowest b...  Horn-Loaded Speakers Forum     5  95354  02-11-2008
  »  New  Denouncing of idea of Bass Horns...  Denouncing of idea of Bass Horns....  Horn-Loaded Speakers Forum     0  27098  04-15-2008
  »  New  ... again on GOTO Unit drivers.....  GOTO installation in Lithuania....  Horn-Loaded Speakers Forum     108  1150794  08-16-2008
  »  New  8" Goto Woofer for 60Hz Horn..  It's not a Goto 8in driver...  Horn-Loaded Speakers Forum     5  87960  11-03-2008
  »  New  My Multi-way Horns..  Faital chamber/ratio...  Horn-Loaded Speakers Forum     8  128095  11-29-2009
  »  New  Macondo’s lowest channel...  What truly are you tryin to accomplish?...  Horn-Loaded Speakers Forum     150  1407701  09-15-2010
04-12-2011 Post does not mapped to Knowledge Tree
scooter
Posts 161
Joined on 07-17-2008

Post #: 51
Post ID: 16016
Reply to: 16015
Maybe...lots of factors working together change the equation
fiogf49gjkf0d
Maybe, but from a practical perspective, theory can be pretty useless as the listening experience is the cumulation of many factors.

My experience (if you care) is that at lower frequencies, room modes get increasingly more difficult to address but time alignment is still critical. Without both factors being sorted (along with a reasonable knee that is well documented on this site), I never got decent low fq integration and I have spent hundreds of hours trying to sort this. 

I am pretty lucky to find a sub location in my room best addresses room modes and is simultaneously time aligned. Moving either the sub or my listening position by less than 1" drastically impacts integration.

Unfortunately sub location is to my right shoulder and despite rapid roll off outside ~25hz and ~60hz when listening I can sometimes locate this thing but just barely. Time aligned in front of the listening room solved the location issue but room modes got more problematic so it stays where it is.

BTW maybe these are learned sensitivities just as a good harp player learns the subtleties of his or her instrument over the years. 
04-12-2011 Post does not mapped to Knowledge Tree
JoshK
Posts 7
Joined on 10-13-2009

Post #: 52
Post ID: 16017
Reply to: 16016
Good to know
fiogf49gjkf0d
I am still open minded about the topic as I just haven't done the experiment myself yet.  I am just strongly skeptical of dogma and much prefer a well thought out argument or empirical results. 
04-12-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,193
Joined on 05-28-2004

Post #: 53
Post ID: 16021
Reply to: 16017
The sub-subject. Terra Incognita of audio.
fiogf49gjkf0d
Josh, I think that you touched more complicated subject then you think. Let me to explain why I feel this way.

The fact that I advocate a dogmatic, religiously-stubborn, almost paranoid time alignment of the channels is not a secret. I do feel very comfortable with my time alignment paranoia and I have no need to debate or defend it. So, far any single installation that I heard, including mine, was benefited by time alignment. The people who visit me and question the time-alignment subject I usually do very short demonstration by taking one of channels out of alignment and explaining to them what specifically they need to pay attention while they are listening. Uselessly there is not more question after then.

The time alignment in bass is of cause is less critical but if to know what specifically to listen then I need to report that I have no problems to recognize the sonic difference when my woofer woofers towers are moved for a 6 inchers away. I do not insist that the change is due to the time alignment, it is very much that it just room modes act differently. Still, the most proper condensing of leading edge of bass pressure ways I get when my woofers towers are aligned with my upper bass? A coincidence? Perhaps, I do not know bay what is the differences. I care about right position of woofers towers in the room and it happened to be where it happened to be. We have very little control over it anyhow….
So, way do I feel that it is “mode complicated subject”? Because there is in it a sub-subject about witch I’ve been thinking for a while and I did not come a comfortable answer.  The sub-subject is the time- alignment for ULF region.

The ULD is sub-auditable bass and in addition to “pressurize” the “nervousness” of the room it prolongs the reverberation time in the room.  The extension of reverberation time in the room is not something that needs to be time-aligned. It needs to be delayed: the lower frequency the longer delay. We can’t do it by our real-time, analog signal processing methods, so what can we do only to set out ULF to be delay for a fixed time with respect to the size and a few other conditions of our rooms. This setting is very “strategic” and it shall be very interesting to play with it. From one side you would like to synchronize the “nervousness” of the room with your music but from other side you want the “nervousness” precede the auditable event, letting your guts to be “pre-cooked”. This is a very interesting and a bit complex subject that I am look forward to explore when I have back my ULF channels.

Now, remind you that I have not proper ULF as my ULF goes too high in might estimation. I might change it in future but in context of this thread I think to tray a pair of Tapped Horns of 12Hz-22 Hz would be more interesting. That would be true ULF and I would be able to run the delays without affecting the auditable range and compromising my Midbass. I wish I know how Tapped Horns sound and how far their sound subjectively from ported ULF enclosures.

Funny but I do not even know if the ported ULF enclosures are not useable for ULF. The ULF is very much a dark side of moon in audio and unfortunately it is costly to explore and serve relatively diminutive result.

The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
05-03-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,193
Joined on 05-28-2004

Post #: 54
Post ID: 16201
Reply to: 16021
My take about tapped horns for now.
fiogf49gjkf0d
I have explored the subject of tapped horns. My exploration did not include listening them – ridicules, isn’t it? I did consult with a few folks, who I respect and who built and heard many of them and who know subject well. I pretty much know what I need to do if I decided to make a pair of tapped sun 20Hz ULF horns. However, after much considerations I decided do not try them.

There are two factors that made me to hold the attempt of test tapped ULF. First is that even if I make over 100dB sensitive tapped ULF then I will not be able to drive it with 20W DSET. Whoever use tapped LF horn insist in over 100W – so, no DSET, no need to go for tapped ULF. Second reason is my fear that tapped horn my in the end to sound like good ported speaker.  I do not have reasons for this fear but I do not have confidence that my fear is unreasonable. Whoever I spoke with did not give me the “magic keywords” that made me comfortable that tapped horn is not a “port with help”. I am very anal about fine differences I ULF overtones and I do not know if tapped will be discriminating enough.

I have to say that to find some kind of semi-local guy with tapped horn would not address my interests as I do not need to hear ANY tapped horn but rather properly sounding tapped horn. Sine I have no inspiration what would be a properly sounding tapped horn I have no idea what to look for. I guess the way how I might undertake the tapped ULF direction would be if somebody who know tapped horn well would stop by at my place, hear my ULF, point out to me the specific sonic problems I have with my ULF and suggest that those problem might be addressed by use of tapped ULF. If someone has those expertise them let me know and we could make some kind arrangement.

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-26-2012 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,193
Joined on 05-28-2004

Post #: 55
Post ID: 17752
Reply to: 10333
The new use of Trapped Horn idea.
fiogf49gjkf0d
The idea of trapped horn looks like get very popular among audio people. I have no position on the subject and I do not know if trapped horn is able to facilitate proper sound and if it drastically different from the sound of operated enclosures. I never heard a properly made and installed setting with trapped horns, so I will demonstrate no opinion on the subject.

However, regardless the ability of trapped horns to produce bass that I would consider “proper bass” they for sure produce bass and by relatively small efforts and size. So, an elegant idea come to me and it looks like it never was implemented before, least I did not hear about it.

Why do not use the trapped horns and to make a “full range” monitor? There are zillion floor-stating bookshelf monitors out there. Usually the bookshelf monitors are two ways speakers of 1-2 cub feet, some of them not bad. To make them floor-stating the makers add to them nice and in some cased elaborate stands. So, why do not build trapped horns INSIDE the stand for bookshelf monitors. Take a look at topology: a two way monitor with just sub 100dB sensitivity and vertically positioned “clandestine” trapped horn of let say 40Hz inside the stands? It sounds very reasonable to me.

It you are a manufactures and you embrace my idea then, please, contribute the proceeds from your first sales to your local shelter for homeless felines.

Rgs, 
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-12-2018 Post does not mapped to Knowledge Tree
Shashi
Posts 1
Joined on 01-26-2018

Post #: 56
Post ID: 25035
Reply to: 10438
Image Refresh
Attachments are no longer visible posts 23 to 28. Is it possible to refresh them?
08-13-2018 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,193
Joined on 05-28-2004

Post #: 57
Post ID: 25036
Reply to: 25035
Sorry, no images any more.
Sorry, Shashi, I can’t help you with it. The images john used were not stored at my server but were coming from myspacecdn.com. The images are not available at the remote server anymore and I do not cache the images from other URLs


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-13-2019 Post does not mapped to Knowledge Tree
xandcg


Rio de Janeiro, BR.
Posts 218
Joined on 09-07-2014

Post #: 58
Post ID: 25593
Reply to: 25036
Danley DTS-20.
This is an old topic, but just in case, Danley now offer the DTS20, and that seems to have the format ratio Romy was looking for in the past.

Cheers!




Think for yourself, do not be sheep.
Page 3 of 3 (58 items) Select Pages:  « 1 2 3
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Barn Conversion - James' Project..  The vintage vs. contemporary compression driver....  Horn-Loaded Speakers Forum     28  368244  02-04-2007
  »  New  About bass horns by Johan Dreyer..  There are lowest bass horns and there are not lowest b...  Horn-Loaded Speakers Forum     5  95354  02-11-2008
  »  New  Denouncing of idea of Bass Horns...  Denouncing of idea of Bass Horns....  Horn-Loaded Speakers Forum     0  27098  04-15-2008
  »  New  ... again on GOTO Unit drivers.....  GOTO installation in Lithuania....  Horn-Loaded Speakers Forum     108  1150794  08-16-2008
  »  New  8" Goto Woofer for 60Hz Horn..  It's not a Goto 8in driver...  Horn-Loaded Speakers Forum     5  87960  11-03-2008
  »  New  My Multi-way Horns..  Faital chamber/ratio...  Horn-Loaded Speakers Forum     8  128095  11-29-2009
  »  New  Macondo’s lowest channel...  What truly are you tryin to accomplish?...  Horn-Loaded Speakers Forum     150  1407701  09-15-2010
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts