|
Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
|
|
|
I do not use drugs in any form, as I possess all necessary crassness within myself without using any external incentives. Saying that I would much rather to see our government supply citizens with LSD then with Iraq’s death certificates. At any...
|
I note English Mfgrs tried low power ribbon Midrange horns in the 50's (Decca, Kelly & Quad also made one!).These were probably inspired by the hi pwr prewar? Klangfilm ribbon horn (would like to hear one of those!) But, after Peter Walker moved ...
|
A nice pic of Lara and one of my newly acquired Quad 57 esl speakers....
|
Dear Romy,I performed the following tests:Test 1.Digital CD source OFF;Digital Domain DD-2 processor OFF;Lavry DA-924 OFF;Sansui TU-X1 ON and set to FM output;Custom tube amplifier ON volume HIGH;ESL-57 speaker arrays ON;Result: no interference and n...
|
I use Jecklin Float Electrostatic headphones (known to some as ear speakers as they sit slighlty away from your ears) and the nearest speaker I have ever heard emulate the feeling of these headphones is the ESL 57's. They are noto...
|
Interestng, I did not near horn load Electrostats. What the profile and what the mouth rate of your horn? What the resonant frequency of Electrostats you have before and after loading? Are you driving the Electrostats direct from plate or via a trans...
|
Romy, cats, dogs, i drugie zverione of my first posts here...May I suggest one mechanism, speaking out of pure theory here:the ansars have alledgedly much smaller esl+esr than mastodont electrolytics.This creates higher Q tanks, also higher tuned. Th...
|
Hagtech, why not??? VR's are sensitive to parallel cap, as they have intrinsic esl (few mH). choke will increase the ac regulation.Of course it must have enough DCR (or R in series) to give the static voltage drop (giving e.g. some trace of line regu...
|
...if you wish. even with Mex flavour ;-) I'm sorry I was imprecise. I ment exactly what you said...and forgout about 3200Hz...but I think that there is something more interesting going on here: what you have hereis rather a rare instance of an intel...
|
Ah electrostats...I am fairly sure that problem with esls is trying to take them down to low and them not being driven properly. If you actually calculate how much current you need to drive transient peaks into an ESL, it's horrifying. I can't imagin...
|
Hi Romy,Do you find listening to music at home through the old hifi system more enjoyablewithout the need to become intoxicated by our government drugs or do you haveto remain bolt upright like a Sgt.& totally in control of your body.Never t...
|
Nice posts Romy and Jan, agree almost 100%. I've heard the Behringer in an originally crummy system and it butchered things completely. The input levels were low, which as you point out, won't have helped at all.On a vaguely related note: I dunno if ...
|
Maybe if you didn't try to pull the caps down so fast. Why the hurry? Maybe a 500 ohm or 5k ohm resistor would be a more kind bleeder. I think the peak current spike is not such a good thing for the capacitor. You are also at ...
|
I twice had the opportunity to listen to a Wilson: The Puppy 8 combined with a Lamm power amp and the latest Maxx with Soulution electronics. Both times my impression was that there is some characteristic shining or radiance probably induced by the b...
|
Dear Roman and all... also unrequested/unsolicited, MUST give my opinion on the above... I had to translate my 2,3 meters from my Gotorama speakers system, and obtained 7,6 or so feet... it's angled 110° in front of my head, placed on 5,3 meters long...
|
HelloI've always wanted to try an ESL as a horn driver:So I employed a hi power Koss 3-layer bass module cut from Koss "model 2" spkr.Polarizing voltage was low on Koss design so it was upped to 3kv w/ custom PS.Horn is old closet that had a trapdoor...
|
Forgot to elaborate the Quad system.It is actually a tri-amp Quad system, below 100Hz is the Supravox 15in Field coil in open baffle, then it's a Stacked Quad ,and about 5Khz there were 5 RTR ESL cell. I did try the 6C33C amp in a single pair Quad by...
|
Yes, I've heard this theory too that paralelling caps lowers the esr/esl => better rise time.No idea if it's true or only an excuse for not using big, hard to get and expensive single caps.PSA quote from arandom physicsforums thread:"In the genera...
|
just been this feb in NY city to an exclusive Wilson studio. I thought that the rushy noisy exhibitions where their portfolio sounded very average to me was maybe not fair to judge, if everyone loves them so much. So in that studio i got all the time...
|
[quote user="Romy the Cat"]Arno, I am glad that you take my comment with right attitude; this is indication that you are not dead, despite the fact that you are building a back-loaded horn. I do not think that you find a lot of useful horns informat...
|
[quote user="KOTriode"] Without regulation, this amp would not work correctly due to its design: DC coupled and fixed bias. The high transconductance will make the bias current varied as much as 50-100ma due power line fluctuation without the reg...
|
The preamp has the classic tube regulated power supply using 5R4, 6AS7, 6SJ7. It is transformer coupled output and has no capacitor in the signal chain, the gain is about 8db, so it is not a buffer. For convenience, it does has a remote control. It i...
|
Hi,[quote user="Romy the Cat"]T, would you elaborate on it if you feel that it has any merit?[/quote]Really, I do not know. From my limited experience I have found that multiway active systems are very much a tuning excercise par excellance. Given th...
|
[ Romy: Moved as a reply to http://www.goodsoundclub.com/TreeItem.aspx?PostID=2218#2218 ]Hi Roman,[quote user="Romy the Cat"]Let pretend that a group of 1000 people have an imaginary ultimate 1000000-bands equalizer, the one that do nothing nega...
|
Hi,[quote user="morricab"]Thanks for the info about transformers. It is as I expected, however, that these passive devices are not passive sonically at all. I agree with you that the higher quality of the transformers should lessen the effects ...
|
Hi Romy,Probably my evaluation methods are still quite moronic, but I think I'm learning to listen to what matters in the music. I had some experiences with a friend using several caps in a preamp he built, and also in the integrated I'm using. I und...
|
Without regulation, this amp would not work correctly due to its design: DC coupled and fixed bias. The high transconductance will make the bias current varied as much as 50-100ma due power line fluctuation without the regulators. It mi...
|
[quote user="Thorsten"]While what you present is an admirable thought experiment, I can assure you that the premise you posit:"people who are familiar with the way how life music impacts them will painlessly adjust that EQ and will end up with very m...
|
Somebody “manuelgarcia66” wrote in the Yahoo Tannoy Group. I think it was the ONLY reply on SUBJECT among others that proposed that I was in ignorant troll who should not bother the forum:
"I?ve come to tannoys from different speakers-enclosures: Me...
|
Okay... I also downloaded the original Milq SET amplifier PDF and have looked at it in detail as well as the 6-channel adaptation (DSET) and I understand where you're going with it... or so I think. In my particular situation, I've owned two pair of ...
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
Last 24-hours posts: |
2 |
|
|
|
Total human visitors: |
43,285,191 |
|
|
|
|
|
|
|
|
|
Pasquini, Bernardo (7 Dece»
|
Purcell, Henry (7 March 16»
|
Tárrega, Francisco (2»
|
Godowsky, Leopold (13 Febr»
|
Karg-Elert, Sigfrid (21 No»
|
Martin, Frank (15 Septembe»
|
Rathaus, Karol (16 Septemb»
|
Paciorkiewicz, Tadeusz (17»
|
Simpson, Robert (2 March 1»
|
Williamson, Malcolm (21 No»
|
Gudmundsen-Holmgreen, Pell»
|
|
|
|
|