| Search | Login/Register
   Home » Melquiades Amplifier » 5 Channel Version of Melquiades (22 posts, 2 pages)
  Print Thread | 1st Post |  
Page 1 of 1 (22 items) Select Pages: 
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Super Melquiades Amplifier...  About the Super Melquiades Bass....  Melquiades Amplifier  Forum     29  268772  07-16-2005
  »  New  Summary: my/your audio: year by year..  Happy 2024!...  Audio Discussions  Forum     45  376058  12-29-2006
  »  New  Jessie Dazzle Project..  Will this better to be auditable?...  Horn-Loaded Speakers Forum     172  1509199  08-03-2007
  »  New  6 Channel Version of Super Melquiades..  The first Milq screw up....  Melquiades Amplifier  Forum     131  1202684  08-08-2007
  »  New  A DSET is better then an expensive SET..  DIY Stradivarius...  Audio For Dummies ™  Forum     41  374516  09-21-2007
  »  New  Incorporating active crossovers into DSET..  Thanks...  Melquiades Amplifier  Forum     2  43988  07-22-2008
  »  New  The DSET perspective examines the Herb Reichert article..  Are you still in Reutlingen, Germany?...  Melquiades Amplifier  Forum     5  93866  07-01-2009
  »  New  Thomas Mayer’s Triamp..  It is much more then juts "properly calculated and...  Melquiades Amplifier  Forum     2  38362  03-03-2010
07-23-2006 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 1
Post ID: 2686
Reply to: 2686
5 Channel Version of Melquiades

(Quote from your post) "... by building any serious horns you will very fast overgrow the ML2's ability to be flexible."

Yes, this is in fact what I meant by "limitations imposed by of a pair of SET amps such as the ML2s".

Would it be possible to adapt your plans to build a pair of Melquiades with 5 dedicated channels?

Regarding simplification: I would have no interest in simplifying the design if it would not result in an audible improvement.

If you could supply the contacts for the "approved parts", I will order them, and have them shipped to a family member in the U.S., and later (once everything is in one place) shipped on to me as a single shipment.

The chassis and covers could of course be made locally.

Regards,

jd*


How to short-circuit evolution: Enshrine mediocrity.
07-23-2006 Post mapped to one branch of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 2
Post ID: 2687
Reply to: 2686
Some thought about 5-Channel Version of Melquiades

This thread is split from the following thread:

http://www.goodsoundclub.com/LatestPosts.aspx?ThreadID=2665

Jessie, I hope you do not mind that I pulled it to the forum explicitly dedicated to the Melquiades Support.

5-channels Melquiades is great idea, I am sorry now that I did not made 4-channels Melquiades as I need now to drive my “Fundamentals Channel” and I do not need one more channel in the same chassis. Still, the 5-channels project would be costly and labor extensive and if I were you I would not dive into it without confirming that a regular single channel Melquiades sound acceptable to you. I would make a prototype with no-chassis and would spend a few months to listen the thing. At that time you will be having you horns and Lamm ML2 and you would be able to observe if Melquiades is valuable to pursue. Who knows, it might be that I’m a fool of it and you did not find the Sound you get from Melquiades worth to continue. A Milq is simple and if you have the Lamm ML2 as a reference (and it is a phenomenal reference!!!) then you would very clearly see if Melquiades is the direction you would like to go. There is another benefit. Since you live on another side of the Globe it is possible that you would like to use some of your local parts and the Milq prototype would be a wonderful opportunity to try some of your choice.

A few words about 5-channels Melquiades that you might to consider. You can pile and many channels as you wish but you have to think in term of packaging everything. Here are some very raw thoughts:

1) You need to decide if you go for single chasses vs. separate chassis for amp and powers supply and if you go for stereo amps vs. monoblocks.  I went for dual chasses monoblocks. If you select the same direction then be advised that you must keep that last largest capacitor of each power supply on the amplifier chassis not on the power supply chassis.

2) You need to decide how you would organize transformers. I went in Super Melquiades for a dedicated transformer for each amps need; however you might combine the positive bias supply with plate of the first stage. I do not see why it might be problem. The filaments would be defiantly a very dedicated transformer. I would make a single huge 20A 6.3V transformer and would drive all tubes from it. There are some benefits to drive 6C33C with parallel 6.3V instead of 12.6V as you would be able to connect one or both heater as you wish.

3) You need to figure out how you would power output stage. Since you do not plan to do lower then 40Hz in your Super Melquiades it does not sound like a complex problem. Make a dedicated 1.5Atransformer with 2-3 power taps and drive all second stages from it. In super my Super Milq I have a single 1A transformer that drives 2 rectifiers and two LCRC chains. One chain drive LF channels and another all the rest. You might do the same or even go for one single supply of the second stage since you do not go for very low frequency that usually “milk” power supplies. From a different perspective… it is “Class A” what kind milk I’m talking about!!!?

4) You need to decide how you will be implementing the input stage. This is the most intricate. Theoretically if you decide to go creasy then you might put a separate pair of gas tubes for each channel. In my Super Milq I decided to use one pair of the gas tubes for all 3 channels. It is a compromise in a way. Take a look at my original plan how I envisioned using it.

It looks confusing but it is not, you will see the very same Dima’s “resistor” bias (groups R2-R3-R4, R5-R6-R7, R8-R9-R10), then you will see the voltage dividers that EQ the deference in sensitivity between the LF and M/F channels (R11, R12, R13, R14), and you would see some filters (R1, C21, C5 and C3). It was exactly how it was built initially but then some changes were made. The resistors were divided to their common dominators and I ended up with the following, this is exactly what I have now running in my amp:

As you see now I drop bias voltage right on the filter resistors and the input look very slick and simple. It took some time for me to find out exactly how I would like to balance the channels (those dummy 6C33C all have different gain) but I have an idea what I would need to crossover them. Then Dima helped me to recalculate the values of the resistor to keep the crossovers in pace and provide for the 6E5P the same bias.  You would need to do the same – start for the fool scale - as you do not know what would be difference in sensitively between your channels. Throatily you would as you will have the horn made at that time but you might observe that it you go for line level filter then you might slightly revise the crossover points (I did). There is a catch in there. You would like to keep the last resistors before grid (R10, R4, R5 and R9) as high value as possible. With supplying 150V into the 3 or more channels the values of them go down…. Perhaps you might consider putting 2 series gas tubes and making then 300V but I do not know how they sound connected in series. With the Milq basing scenario everything is very freaky and whatever comes between the bass tube and the grid has HUGE impact to sound.

5) You would need to think how to cool the thing. Five 6C33C generate some heat. It is possible to use natural air flow (make more holes) to do it but I personally like to keep everything very compact and direct for the sound chain. For instance my coupling caps (including 3 caps by 2uf for bass channels)  sit very close from tubes:

The caps that I use are 85Celica rated; they might be 105Celica with 50% voltage duration. I did not go for 105Celica and used 85 degree. The caps sit on the silicon bath and blow by fan. I have the amp running with no fan and it does fine (the bottom panel of my Super Milq has many ventilation holes that I seal when I use fan). However, I messes temperature after many hours of operation and I do not liked what I have see. It smells “different” and it had once that one of the leg of 6C33C filament got almost unsoldered (!). Nothing failed but I feel that with forced cooling the amp behaves more temperature stable. With fan that operate at 11dB noise it is not really big deal to use fans.

6) You would need to do a lot of drawning in the real-size to do, in order to figure out the size or your parts and how you would layout them. I put together some very initial ideas and you might use them as a starting point:

Be advise that you might not need to go for the large caps for HF channels and the large caps make sound “harder”…  It took for me some time and quite a few versions to end up with what I end up. There is a lot of other things to consider but it is what on the top of my mind for now…

Anyhow, if you need any help or objections then I would be happy to assist you. Perhaps some other guys who have more experience how to build the things jump to the wagon of your consulting team. I know Jim, Dima, Bud, Chris and some other folk visit this sit and their contribution might be very valuable. Perhaps I would learn something…

Still, I would like to stress this point VERY aggressively you need to male a single amps prototype and listen it. You must have a reference point. Partially you need to do it in order to confirm that each of your channels sound as good as the reference full-range range amp. I wouldn’t make 5-channels amp without knowing what a single channel full-range range amp is capable off…

Rgs,
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-24-2006 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 3
Post ID: 2691
Reply to: 2687
Re: Getting started : Melquiades
Romy,

I too was thinking the subject had evolved to the point where the thread needed splitting off.

I agree with you regarding the need to start off by constructing of a pair of “normal” Melquiades as a reference.

I don’t mind the fact that a 5-channel project would be labor intensive.

In both cases, I will start off by assembling all the components zip-tied in open-air to their supports (non-conductive panels).

As for sourcing the parts locally : I am very much in favor of experimenting once up and running, but it may be smart to establish a reference using the “Approved Suppliers”, and trying other components later on.

There are a few good shops in Paris that have shelves and drawers full of components. And, across the channel :
http://www.sowter.co.uk/

Regarding the architecture of the 5-Channel beasts : I should start off by confessing that I am not at all an electrical engineer. I will need to think and ask advice regarding the details. In the prototype stage, though it might be more costly, I have a strong preference for keeping things as direct as possible, dedicating components to only one channel. This approach has the advantage of being easier to get one’s mind around exactly what he might be doing.

As for general architecture/packaging (5-Channel amps) : For reasons of weight (if not for theoretical sonic advantages), dual chassis monoblocks would seem the best choice.

For cooling, I will need to consider the fact that I live with two cats (yesssss), and a fan would likely require an external filter, (which could also serve to attenuate the fan noise). Because I am less interested in keeping things compact, this should not be a problem.

As for drawing, its what I do best, or I can whip it all out in 3D (using CAD software)… no problem.

BTW, your drawing looks really good… reminds me of Stonehenge… very temple-like.

Thanks very much for your offer to help.

Could you send the list of “Approved Parts” (and where to get them) for construction of a pair of standard Melquiades.

You can send it here :
mark.walters@noos.fr

Thanks very much,

jd*



How to short-circuit evolution: Enshrine mediocrity.
07-24-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 4
Post ID: 2693
Reply to: 2691
Re: Melquiades - think BEFORE you start.

 jessie.dazzle wrote:
There are a few good shops in Paris that have shelves and drawers full of components. And, across the channel ….
Yes, you might experiment with transformers.  Sowers have good reputation but I never used them and have no idea what they are. Lundahls have own beauty as the are small, not really expensive, available, sound good with amorphous core, have a very flexible and very comfortable asses to the sections of the secondary that you will find very useful, have a very wide range of possibilities the your also you to configure a transformer with less turn and lower primary inductance for HF channels. Still, perhaps smoothie is more interesting in there. I did not try multiple transformers: I got the Lundahls and was quite comfortable with the result. Since you live across the pond you might try Tribute transformers:

http://www.tribute-audio.nl/

However be advised that all that wisdoms about the “good reputation” worth very little. People prefer one of another transformer primary in context of a full range transformer, as any SET transformers is juts a compilation of compromises. However in context of DSET, when you have a dedicated narrow frequency range transformer for each channel then rules of the game are different and you might go away with much simpler transformer and get much better result at the same time. You just do not care about the bandwidth of the transformers anymore.

 jessie.dazzle wrote:
Regarding the architecture of the 5-Channel beasts : I should start off by confessing that I am not at all an electrical engineer. I will need to think and ask advice regarding the details. In the prototype stage, though it might be more costly, I have a strong preference for keeping things as direct as possible, dedicating components to only one channel. This approach has the advantage of being easier to get one’s mind around exactly what he might be doing.

Hm, if I were you I would go for horn first. Then you will see what channels you might need. I personally do not feel that you it really make sense to make 5-chanls DSET if you wish do not lower then 40Hz. For instance I run MF and tweeter from the same channel with a transformer of 1.5H inductance. You have to have reasons (crossovers, drivers and so on) to isolate the drivers to desiccated channels and it is not necessary should be 1:1. For instance I will be considering to drive my “fundamental canal” from my current upperbass channels and I will go for a separate amp ONLY if I see/hear the benefits. Perhaps the benefits will manifest themselves (crossover + ability to drive the channels with different current = manage the transients) but how critical it would be? The more you go up in the frequency the less critical it will be. The 3 of your channels will be over 1000Hz and they might be integrated (if the crossovering allow to do it painfully)

 jessie.dazzle wrote:
For cooling, I will need to consider the fact that I live with two cats (yesssss), and a fan would likely require an external filter, (which could also serve to attenuate the fan noise). Because I am less interested in keeping things compact, this should not be a problem.
Absolutely, the foam filter is very necessary and the cost $1.70, including the filter holders. I use them everywhere and clean then one in few month.
 jessie.dazzle wrote:
Could you send the list of “Approved Parts” (and where to get them) for construction of a pair of standard Melquiades.
I would like to keep everything open public and do not sent message that Melq might use some Approved Parts. There is nothing “special” in there and I do not believe into “making sound” but selecting of different sounding parts. I feel it is what Morons do and I am not.  Look at the paragraph  “Some Specification comments” on the Melq’s page:

http://www.goodsoundclub.com/Melquiades.aspx

Rgs,
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-30-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 5
Post ID: 2707
Reply to: 2693
Super Melquiades insided - a fresh shot.

BTW, Jessie, this morning I opened a Super Melquiades and made some changes in plate current measurements. While I did it I took a shot of the Super Melq inside. The former image was made juts when I finished the amp. The current shot is actual stage of the amp as it has been used for a year. You might or might not find the idea useful but it is what it is…



Red is the signal. Green is the B+


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-01-2006 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 6
Post ID: 2713
Reply to: 2707
Re: Super Melquiades insided - a fresh shot.
Romy,

Thanks for the updated image of the Super Melquiades.

For the past 10 days I have had to temporarily stop production of the horns and put off researching components for the amps; all this is due to my moving to a new apartment sooner than expected.

This move is actually very much a part of the entire project, as there is no way the horns would have fit in the old place.

I am looking forward to getting back into it (probably another week before I am up and running again...)

jd*


How to short-circuit evolution: Enshrine mediocrity.
08-01-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 7
Post ID: 2714
Reply to: 2713
Re:think about the architecture ... before.
 jessie.dazzle wrote:

For the past 10 days I have had to temporarily stop production of the horns and put off researching components for the amps; all this is due to my moving to a new apartment sooner than expected.

This move is actually very much a part of the entire project, as there is no way the horns would have fit in the old place.

I am looking forward to getting back into it (probably another week before I am up and running again...)
Jessie,

I do not wont to dive too dive too far from the subject of building Melq in this thread but I would like to make an important point that I feel you should take under consideration when you will be architecting your new installation. As I understand you will be going for ~50Hz horns, which is fine but the major question for me, if I were in your situation, what kind topology you will be using the lower bass channel and how you will be driving it. It is much more complicated question then you think and you might not necessary would be able to answer to this question in the new, unknowing to you room. This is why again and again I suggest you do not do anything but juts think about the architecture, options and methods for now.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-03-2006 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 8
Post ID: 2724
Reply to: 2714
Re: Dealing with the Variables
Romy,

Thanks for your comments.

When you write "...but the major question for me, if I were in your situation, what kind topology you will be using the lower bass channel and how you will be driving it."

I assume you are suggesting that the topology of the lower bass channel would be easier to nail down in a room having an acoustic character with which I am already familiar.

Very true, I am not making things easy by throwing so many unknowns into the mix (new horns, drivers, amps, and room).

I am working to establish a reference point in the new room, in as much as will be possible, by carefully setting up the existing (direct radiating) system, then switching to the horns driven by a pair of full range SET amps via passive filters, and finally to the horns driven by the five-channel Melqs.

It will be necessary to get the system sounding right in each case (each step) before moving on.

I am somewhat counting on my familiarity with what can be expected of the existing system in a variety of environments (I have lived with it, unchanged, for a good long time).

Regards,

jd*



How to short-circuit evolution: Enshrine mediocrity.
08-04-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 9
Post ID: 2727
Reply to: 2724
About the LF in multi-channel DSET

Yes, Jessie, but in case you decide to go for DSET, would it be multi-channel Melquiades or anything else, then your consideration for type and topology of the lower bass would greatly dictate requirements for your DSET. If your lower bass channels run from 40Hz and down then the PS, size of the capacitors and the size of the output transformers for this lower frequency channels would be dominating in your amp. Also, you MUST take under consideration many other factors: efficiency of your LF section, reverberation times in your room at LF, the dimensions of your room (actual and virtual), power handling of your LF drivers, the topology of your LF section and many others.  For instance my LF Super Melquiades channel has somewhere slightly over 20W power and it is perfectly fine with my 6-drivers line array and relatively small room, in fact I have a lot of spare power. However, if my room would be 3 times larger or much less bass efficient then I do not think that the power I get from a single 6C33C would be enough for me.

Since you, looks, like will be dealing with very large room I do not know how it all will play to you. The 6C33C is a fairly not powerful tube and in the way in which it used in Melquiades (fixed bias) it gives better sound but less toleration to work with high AC grid voltages. It is phenomenal rube for bass that does down to 100Ohm on plate and makes the LF transformer very simple to make but it will be still 20W, and in many instances less power if you would like to drive it reliably.

If you find that you need more power then you might go in your LF channels for parallel 6C33C, getting out of it 35W-40W or go for more powerful tube, high voltage tubes for instance. It would be if you would like to stay in the SET world for your LF channel. It is possible that you might decide do not stick to SET for lower LF and go for PP tubes or PP SS amps. It is an open question if properly made SS, hybrids or PP tube amps might be a good complimentary lower LF amplifier to a system where DSET drives the rest of the systems. In fact I will be trying to address this question for myself in context of my system: the LF channel of Melquiades was better then any SS amp that I tried and was better then Zaratrusta Hybrid. However, the new implementation of Zaratrusta is coming (made at very different level, 150W of pure class A, with many other new elements of design) and I really wonder how it will be able to stand up to the sound of Super Melquiades’ LF channel.

In context of this thread: you need to decide much power you would need from your LF channels and then ingrate or do not ingrate this solution into your multi-channel DSET

Rgs,
Romy the caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-09-2006 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 10
Post ID: 2740
Reply to: 2727
DSET : Defining LF Channels & Necessary Power

Romy,

Sorry for taking so long to get back to you… (this being the summer time in a Latin country, I still have no internet connection at the new place).

Quote from Romy “If your lower bass channels run from 40Hz and down then the PS, size of the capacitors and the size of the output transformers for this lower frequency channels would be dominating in your amp.”

To clarify things, here is the way I plan to handle frequencies under 500Hz :

Upper Bass : Frequency range between 100 and 500Hz – Driver loaded into a 120Hz straight horn, driven by DSET dedicated channel.
 
Mid Bass : Frequency range between 40 and 100Hz – Driver loaded into a 45Hz straight horn, driven by DSET dedicated channel.
 
Lower Bass : Frequency range under 40Hz – via a pair of large direct-radiating woofers in sealed enclosures - driven by a pair of 100 watt hybrid monoblocks (Lamm M1.1s).

Based on the info in the thread “Exceptional loudspeakers drivers: 18-inchers”, I would of course like to try the Aurasound 1808, but I am not at all sure I can find a pair of the original model… In that same thread, you mention the 833A tube could possibly be used to good effect in a DSET channel driving such a woofer… ultimately, I would like to consider this solution, in which case we would be talking about a 6th channel. For now however, I think it would be best to take things one step at a time, and leave this channel out of the DSET, driving it with the M1.1s (I don’t mind building a second version that integrates a lower bass channel, but would rather leave that for later).

Room dimensions : The “room” is actually a sort of loft; the main room plus immediately adjoining areas total to around 400 ft², with ceiling heights varying from 8.25 to 16.5 ft. for an average of about 12 ft, which works out to about 4800 cubic ft. How does this compare with your room?

Quote from Romy : “In context of this thread: you need to decide much power you would need from your LF channels and then ingrate or do not ingrate this solution into your multi-channel DSET” and “If you find that you need more power then you might go in your LF channels for parallel 6C33C, getting out of it 35W-40W…“

In the case of the Upper-Bass channel (100-500Hz) : The driver can handle up to 100 watts, and has an efficiency rating of 101db/w/m. I assume 20 watts would be adequate.

In the case of the Mid-Bass channel (40-100Hz) : The specifications regarding power handling and efficiency of the selected driver (Vitavox AK151) are not clear; the manufacturer says power handling is “determined by the associated horn characteristics”… In any case, 20 watts should not be too much for this driver. You are right, the real question is: Will 20 watts be enough?

I had planned to answer that question by connecting a pair of ML2s to the horns, but am having trouble finding a seller (early version ML2) who will ship to Europe.

Thanks for your thoughts,
Jd*


How to short-circuit evolution: Enshrine mediocrity.
08-09-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 11
Post ID: 2742
Reply to: 2740
No problems with necessary power

 jessie.dazzle wrote:
Upper Bass : Frequency range between 100 and 500Hz – Driver loaded into a 120Hz straight horn, driven by DSET dedicated channel.
 
Mid Bass : Frequency range between 40 and 100Hz – Driver loaded into a 45Hz straight horn, driven by DSET dedicated channel.
 
Lower Bass : Frequency range under 40Hz – via a pair of large direct-radiating woofers in sealed enclosures - driven by a pair of 100 watt hybrid monoblocks (Lamm M1.1s).

Hmmmmm, I would say that looking at the upperbass channels it would be important to know where and how your MF driver stop. Would it be 500Hz, 750Hzm 1000Hz,? The Slope, how good they will be at their lower knee? It is all very important. I do not feel that it is possible to think about the system architecture without looking what a specific driver does in the specific condition. 120Hz straight horn is a good thing but why 120Hz? Also, the 40 and 100Hz? It might be also the 40-150Hz and 150Hz-800Hz. It will be all depends the driver you use and the physical excursion of the bass horns and your ability to position them. Still, what you are planning to do it very commendable and very noble…
 jessie.dazzle wrote:
Based on the info in the thread “Exceptional loudspeakers drivers: 18-inchers”, I would of course like to try the Aurasound 1808, but I am not at all sure I can find a pair of the original model… In that same thread, you mention the 833A tube could possibly be used to good effect in a DSET channel driving such a woofer… ultimately, I would like to consider this solution, in which case we would be talking about a 6th channel. For now however, I think it would be best to take things one step at a time, and leave this channel out of the DSET, driving it with the M1.1s (I don’t mind building a second version that integrates a lower bass channel, but would rather leave that for later).

Well, if you do not go for LF driven by SET then your DSET amp will be relatively simple. You would not need any crazy transformer or PS. Two tips. Do not literally follow the “Exceptional loudspeakers”. I am sure in your part of the world it is possible to find the similarly good drivers. The second tip, and I ma not kidding: forget about the lower frequency channel. Make the horns, get good Sound and THEN add the LF channels. With proper 40Hz horn you should be a able to get very good sound and the LF channel will be a assessed on context of all together well balanced and performed system. I sincerely fell that it you have all horns made and amped then you would need at least 6-mouth until it would make sense to bring the LF channel in the picture.
 jessie.dazzle wrote:
Room dimensions : The “room” is actually a sort of loft; the main room plus immediately adjoining areas total to around 400 ft², with ceiling heights varying from 8.25 to 16.5 ft. for an average of about 12 ft, which works out to about 4800 cubic ft. How does this compare with your room? In the case of the Upper-Bass channel (100-500Hz) : The driver can handle up to 100 watts, and has an efficiency rating of 101db/w/m. I assume 20 watts would be adequate. In the case of the Mid-Bass channel (40-100Hz) : The specifications regarding power handling and efficiency of the selected driver (Vitavox AK151) are not clear; the manufacturer says power handling is “determined by the associated horn characteristics”… In any case, 20 watts should not be too much for this driver. You are right, the real question is: Will 20 watts be enough? I had planned to answer that question by connecting a pair of ML2s to the horns, but am having trouble finding a seller (early version ML2) who will ship to Europe.

Wow! The 400 sq feet is a good small room. It is not a critical size and the amplification you are trying to use with your speaker will be just fine. You will be getting for horns approximately more then 5W-6Wm considering that your horns do +6dB gain. There are many other variables (for instants now ‘live’ the room is) but I still would not worry of the lower channel will not be driven by DSET.

Rgs,
Romy




"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-02-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 12
Post ID: 2794
Reply to: 2742
I am a hippocratic Cat!!!

Hm, it is interesting… a few weeks ago I was trying to saddest Jessie that if he end up with 5-chanalls installation then it might not be necessary for to have exactly 5 channels of Melquiades.  However, since I moved myself into 5 channels I begin to ask myself if my position was reasonable.

I do have reasons to see how some of the channels might be combined but after a few weeks exploring of the 5 channels I feel that I would LOVE to have 5 channels independent amplification. Moving to 5 channels make more complicated crossovering, at least in my setting and 5 Milqs would be kind of very handy. It is not that am contemplating the project as I do not really like the building ceremony but if you have a local, persuadable technician, competent but with sense of humor and who would be OK to suffer from a minor abuse, then I would undertake the projects. The 5 channels? Hm, it would take some repackaging…

Rgs,
The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-04-2006 Post does not mapped to Knowledge Tree
AnonymousUser
Posts 19
Joined on 11-27-2004

Post #: 13
Post ID: 2796
Reply to: 2794
Re: Sounds Better to Call it "Learning"

Hello Romy,

My apologies for not getting back to you sooner… Moving to the new place has turned out to be a huge task, but worth it, as this new home actually has a place to work, not to mention a much better selection of recorded music at the local library. I have also managed to round up most of the materials for construction of the horns. 

While all this has been going on, I have been establishing a sonic reference in the new room by listening a lot to my existing system (which sounds much better on dedicated circuits, isolated ground, and connected directly to 220v. mains… was previously using a large power regenerator set for 110v/60Hz).

Right…

Good to see the success with the new Fundamentals Channel has you thinking… If you don’t have a 5-Channel version running by the time I get around to building mine, it would not be that much more work for me to make a second pair in parallel…

By the way, a big  M E O W  for your work with this new channel (I have some questions on the new horns, but will keep them for the appropriate thread).

In my case, because I will soon have more horns, I am now very much wishing I had started by building a pair of simple amps…

To answer your questions on choice of frequency ranges (sorry if this diverges from the 5-Channel thread)…

First of all, this project is in my case primarily about education. Myself not yet being an  "Experienced Horn Guy", what I need more than anything is to establish a reference. Like most people, I have not yet had the occasion to hear a "properly done" horn system. Since there seem to be very few of these around, I have chosen to educate myself the hard way, and just build one myself.

Due to abilities that come with having a very sordid past, it is relatively easy for me to produce horns having a diameter up to 40 inches. In the interest of establishing a starting point, I am taking my best shot, based on what I am at this point able to understand in matching a driver to a horn, and also of course based on your experiences (thank you very much). I am fully aware that I may have to do some of the work more than once. I will of course make every attempt to insure getting the 45hz horns right the first time.

Looking at your notes in "Over 8,500 Words About My Playback", you spent "a few years" just finding a suitable upper bass driver, and god only knows how long you spent considering drivers for all the other frequencies.

There may be better drivers out there, but with my level of experience, I doubt my abilities to recognize them. So though it may resemble laziness on my part (remember, this is the same person that will be constructing a pair of 45Hz straight horns…), it is smarter from my point of view, to establish this starting point, and get on with the physical work, basing it on existing research ; i.e., if you don’t mind, on your research.  It is best that I do this now, because later I may have already developed a "Horn Ego" sufficiently large to prevent such a shameless approach ! I sincerely hope you are not bothered by this… Please say so if you are.

My choice of drivers, as well as physical horn characteristics are therefore based either on what you have ended up with, or what I have been able to understand you would have preferred.

In the case of the Upper Bass Channel… Why 115Hz horn ?

Simple ; I was lucky enough to convince Fane to make a pair of the discontinued Studio 8Ms (16 Ohm). Again, this driver, and the characteristics of your Upper Bass horn seem like a good place to start.

I was originally not going to start by building a Fundamentals Channel… It turned out that In buying S2s, I ended up with 2 pairs that seem very well matched (I bought 4 drivers thinking I would make a selection, keeping the two best matched). So, I now have what I need to make this channel as well. I will base the Fundamentals horn on your observations, and will likely be starting off with a larger horn (yes, further obscuring the tweeters !), while trying to stick with first order X-overs.

The 45Hz horns with Vitavox AK151s are what I will be using in place of multi-driver line arrays. 45Hz may not be the final number… I have the space to go a bit lower if necessary.

For frequencies below what will be produced by the 45Hz horns, I am not immediately concerned (I have enough work for now), but am seriously considering a pair of McCauley 6174s, direct radiating, in large sealed enclosures. These drivers have Fs of 20Hz, a 94db sensitivity rating, high excursion, and a paper cone…Manufacturer recommends 6ft³ enclosure volume, so not huge. And… a big plus, I can get them in Europe. As previously stated, the DSET amps will not drive this channel (plan to use a pair of 100 watt hybrid monoblocks).

As always, thanks for your comments,

jd*

09-04-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 14
Post ID: 2797
Reply to: 2796
Let return in this thread to 5-channel Milq...

 jessie.dazzle wrote:
There may be better drivers out there, but with my level of experience, I doubt my abilities to recognize them. So though it may resemble laziness on my part (remember, this is the same person that will be constructing a pair of 45Hz straight horns…), it is smarter from my point of view, to establish this starting point, and get on with the physical work, basing it on existing research ; i.e., if you don’t mind, on your research.  It is best that I do this now, because later I may have already developed a "Horn Ego" sufficiently large to prevent such a shameless approach !

Well, if I’m in self-appointed position to provide consulting then I might saddest that Romy’s finding about his use is Vitavox S2 drive is the most interesting thing. I would propose that two cannels (Upper MF and Lower MF) around two pairs of S2 is very much deserve for literal replication as it deliver the most interesting result I know of. Regarding everything else, I do not know that I have some concerns. I do not want to go into details on it here as it is the 5-chals Milq thread.
 jessie.dazzle wrote:
In the case of the Upper Bass Channel… Why 115Hz horn ?

It is complicated question and do not feel that my Upper Bass channel horn is not a compromise. It order do not be a compromise the horn should be crossed at 200Hz. You have to look at the upper bass horn only in context of it’s integration with your lower bass horn. Once agane, it is a part of larger conversation….
 jessie.dazzle wrote:
Simple ; I was lucky enough to convince Fane to make a pair of the discontinued Studio 8Ms (16 Ohm). Again, this driver, and the characteristics of your Upper Bass horn seem like a good place to start.

I do not know about it. If you have straight 45Hz horn with AK151 then it might work well up to 350Hz-400Hz and then and then handles by your lower MF channel with 200Hz horn and S2 driver crossed at 450Hz…
 jessie.dazzle wrote:
I was originally not going to start by building a Fundamentals Channel… It turned out that In buying S2s, I ended up with 2 pairs that seem very well matched (I bought 4 drivers thinking I would make a selection, keeping the two best matched). So, I now have what I need to make this channel as well. I will base the Fundamentals horn on your observations, and will likely be starting off with a larger horn (yes, further obscuring the tweeters !), while trying to stick with first order X-overs.

Possible…
 jessie.dazzle wrote:
The 45Hz horns with Vitavox AK151s are what I will be using in place of multi-driver line arrays. 45Hz may not be the final number… I have the space to go a bit lower if necessary.

That what I would go if I have space. In your 400cu feet one AK151s will do wonderful. Juts go doe heavier horn you can afford.
 jessie.dazzle wrote:
For frequencies below what will be produced by the 45Hz horns, I am not immediately concerned (I have enough work for now), but am seriously considering a pair of McCauley 6174s, direct radiating, in large sealed enclosures. These drivers have Fs of 20Hz, a 94db sensitivity rating, high excursion, and a paper cone…Manufacturer recommends 6ft³ enclosure volume, so not huge. And… a big plus, I can get them in Europe.

Can you send a link to those McCauley 6174s drivers/

Rgs, Romy the Cat




"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
09-06-2006 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 15
Post ID: 2811
Reply to: 2797
Which Channels to do First
Romy,

Here's the link to the McCauley 6174 specs...
http://www.mccauleysound.com/product_specifications.cfm?ID=126

In considering your comments on the necessity of a 115 Hz Upper Bass horn : You make a good point...

Your quote : "...If you have straight 45Hz horn with AK151 then it might work well up to 350Hz-400Hz and then and then handles by your lower MF channel with 200Hz horn and S2 driver crossed at 450Hz…"

It would seem best to start by putting in place the Mid-Rang horns (both Upper and Fundamentals horns). This would be followed by construction of the 45 Hz Bass horns, followed by listening (and sampling) to determine if there is adequate coverage between the 45 Hz horn and the Fundamentals channel.

Regarding your recommendation to make the 45 Hz horns heavy... Each one will likely out-weigh my car... the difficult part is making them so that they can be moved through the front door if need be... for this, they will have to be made like the stages of a rocket motor...

Thanks, and... Salutations (as they say over here),

jd*


How to short-circuit evolution: Enshrine mediocrity.
09-07-2006 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 16
Post ID: 2813
Reply to: 2811
Re: Which Channels to do First

Once again, let make it the last post off the subject of the 5-chals Milq.

I think it make sence to start from 370Hz-400Hz horns for S2, targeting it for 1000Hz. Then the lower bass horn, for instance the 45Hz, however it should have a chamber of mach larger size, embeblming to tunes the driver for 80-90Hz. I know it sounds ridicules to make a huge horn and waste it for a high crossover point. Still you might find it very beneficial for Sound. People usually do not do it (and I understand why) but you might experiment with it and you might discover then with "enough" space under crossover point the upper bass "might" sound very “opened”. You might go then to a lover crossover point by juts masking out the back chamber. It is hard to predict how high the 45Hz horn will be working. It defiantly will not reach the S2 channels and you will need ONE proxy channel. Would it be Fane in own horn or a compression driver it all depends or many factors but I would most defiantly try to take advantage of a copmression drivers. S2 would be wonderful for this task but you can not run it lower then 450-470Hz. It would be VERY interesting to try it in sub-near0200Hz horn crossed at 470Hz with second order. I will be like nothing else!!! Make sure that you have the diaphragm very precisely aligned.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
03-25-2007 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 17
Post ID: 4063
Reply to: 2686
5 Channel Melquiades with.... one stage.
 ml8 wrote:
So sometimes i just wonder why do you need 6C33C at all, with your high-sensitive speakers.
Actually it would be VERY interesting to expend on it sometimes… Why the Supper Melquiades could not be juts one powerful 2-stafes LF channel and the rest 4 cans would be juts one stage of the Melquiades’ driver. Currently I have 12dB deviser at all channels that make the Supper Melquiades 1W amp. With 4 Macondo channel of 109db I really migh not (???) need it…

So, could the ides of Melquiades evolve into one stage amp? A single 6E5P could do 2W that it twice that I have now… The separate 4 channels of the Milq biased 6E5P would be a phenomenally simple amp… Hm, interesting….

Sometime in future I have to try to convert my failed headphone phone into 6E5P single gain stages….


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
03-26-2007 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 18
Post ID: 4070
Reply to: 4063
I juts wish I have a desire...
Actually it the idea sounds good then the one stage Milq might be a radically simple:

OnStageMilq.jpg

No big caps. Not big currents. No service voltages. No forces cooling. Not gauges for plate current setting. Small and not expensive out transformers. The positive side of biased could be sourced from on B+… sine the power transformers would be very 4A for filaments and 200mA for plates it might be made even within one transformer and one chasses with all 4 channels sitting in there and it might be literally a size of a large telephone…. and could be easily incorporated in the new Macondo frame … I juts wish I have a stamina to try how a single 6E5P will sound on my horns….


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
03-26-2007 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,570
Joined on 10-12-2006

Post #: 19
Post ID: 4074
Reply to: 4070
Voltage/drive/frequency
So this amp would not have to deal with a crossover?  One R and one L in the signal path, it looks like a headphone amp, maybe a dream circuit for a light piston, HF only, given no cap/coil load at the [ribbon] driver.

What is gain from 6E5P?


Best regards,
Paul S
03-27-2007 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 20
Post ID: 4076
Reply to: 4074
A new Super Short Milg? Oh, no!

 Paul S wrote:
So this amp would not have to deal with a crossover?  One R and one L in the signal path, it looks like a headphone amp, maybe a dream circuit for a light piston, HF only, given no cap/coil load at the [ribbon] driver.

Why would not deal with a crossover? The amps will deal with crossover in the way identical to the Super Milq does-combining bias and filter just before the grid of the stage.

It will be hell of a mess to circulate everything considering the necessity to preserver the bias, the input impedances,  use different type of filters (perhaps some subtraction filers) but it is perfectly accomplishable)

It might be way simplified if each channel out of negative gas tube. It would be fine to keep one single negative source but I would more then 150V for 4 channels, perhaps 2 gas tubes but I do not know if the nesting of the gas tube would not affect sound as anything the go to the grid if VERY critical and VERY finicky.

Once again where the get the transformers for the thing? It would be 1K to 15R …..The upperbass and fundamentals channels might be cared by an amorphous version of this (inverted):

http://www.lundahl.se/pdfs/datash/1689.pdf

But how about the HF transformers? I would need something similar with less turns…. Anyhow I do not want to think about it until I verify that one signal 6E5P sound acceptable to drive compression drivers.

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
10-07-2013 Post does not mapped to Knowledge Tree
skushino
Seattle, WA
Posts 93
Joined on 07-07-2004

Post #: 21
Post ID: 20136
Reply to: 4076
High-Pass Filter Help
fiogf49gjkf0d
Romy, would you explain / help me better understand how you implemented the HP filter in Melquiades?

The schematic shows a series cap after the first tube stage (C3 and C4 in the schematic).  I think these are the first-order HP filters, correct?

Question - what is the procedure used to determine the cap values?

My basic understanding is that the knee of the filter is a function of the cap value and input impedance of the following stage.  I'm getting lost on determining the input impedance of the following stage.  I have a hunch I'm overly complicating things.

My goal is to HP my ML2s around 60 Hz.

Thanks.
10-07-2013 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 22
Post ID: 20137
Reply to: 20136
Very easy.
fiogf49gjkf0d
HP means high-passing, right? In Melquiades I do it by changing the coupling cap between the stages. You can do the same in ML2. To unsolder the cap from ML2 is pain in ass but you might juts clip one of the lead and solder another smaller cap next to the big one. To know the cap value you need to know the input impedance of the ML2 second stage and then juts run a first older filter against the fixed impedance. I think ML2 has fix bias and it have to be very easy to find out what would it be.


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 1 of 1 (22 items) Select Pages: 
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Super Melquiades Amplifier...  About the Super Melquiades Bass....  Melquiades Amplifier  Forum     29  268772  07-16-2005
  »  New  Summary: my/your audio: year by year..  Happy 2024!...  Audio Discussions  Forum     45  376058  12-29-2006
  »  New  Jessie Dazzle Project..  Will this better to be auditable?...  Horn-Loaded Speakers Forum     172  1509199  08-03-2007
  »  New  6 Channel Version of Super Melquiades..  The first Milq screw up....  Melquiades Amplifier  Forum     131  1202684  08-08-2007
  »  New  A DSET is better then an expensive SET..  DIY Stradivarius...  Audio For Dummies ™  Forum     41  374516  09-21-2007
  »  New  Incorporating active crossovers into DSET..  Thanks...  Melquiades Amplifier  Forum     2  43988  07-22-2008
  »  New  The DSET perspective examines the Herb Reichert article..  Are you still in Reutlingen, Germany?...  Melquiades Amplifier  Forum     5  93866  07-01-2009
  »  New  Thomas Mayer’s Triamp..  It is much more then juts "properly calculated and...  Melquiades Amplifier  Forum     2  38362  03-03-2010
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts