It might be a good driver but the horn section of it is very much compromised to begin with. If I have it I would consider substituting the original TAD horn with my own spherical horn. It might be difficult as it might be combined in the same peace with the driver’s phase plug. If it is the case then it is possible to cut it horizontally, maintaining the original phase plug and juts to glue to the cut surface a new front horn barrel. It might not be all necessarily but conceptually I do not like the slot tweeters – any rough surface or edge for HF is very bad thing. I always felt that at least the slot drivers much have teeth at the termination edge but then never care about it….
The Cat |
|