Rerurn to Romy the Cat's Site


In the Forum: Horn-Loaded Speakers
In the Thread: Open cell foam in horns and MF drivers
Post Subject: The John Hasquin's schooling.Posted by Romy the Cat on: 1/26/2008
It should be read: "...Alternately you might use hairy wood OR rough plaster surface as Jessie might do with his plaster horns..." Anyhow if you use textured paint then there is an easy was to increase size. When you spray the paint do not spay from default 10”-12” but from I would say 30”. Yes, it is too far and it will waste a lot of paint but it has own merit as the paint when it arrives to target surface will be already dried out and will pile itself up instead of gluing to older layer of pain and turning into a liquid. The further you go in distance between stray can and the horn the larger paint texture. The larger texture I was able to get was when I painted in a very cold day and used a very hot paint. I usually warm the paint to 60-65C before spraying….

Rerurn to Romy the Cat's Site