Rerurn to Romy the Cat's Site

Paul S wrote:

It took ~3 1/2 hours for the system to charge up and start working as a system again, and then I tried Romy's suggestion to try dropping current (and raising vlotage) on the ML2s.  I experimented again and stuck with the 16 ohm taps, and as I listened I moved the V/A points around, eventually deciding on 54 Watts as a pivot, and I settled on 29.5 mA and 183V.

Paul I do not think I suggested dropping current and raising voltage as I have no idea what loudspeakers you are using. I might suggested to play with taps and play with different current and voltage settings  but I would defiantly would not propose to go toward explicit dropping current and raising voltage. BTW, the 295mA (I ma sure it was not 29.5mA) and 183V is very close to what Vladimir suggests to use (175V and 300-310mA).  BTW, a few years about I was asking Lamm what was max current his ML2 transformer is gaped (to know what would be my current boundaries when I was dropping voltage) and he replied that it was his proprietary information that he is not wiling to divulge. What a hoot!

BTW, if you still looking for bass then you should dump you ML2 and but Lamm ML3 as according to some Morons ™ the ML3 has “better bass”….

Rerurn to Romy the Cat's Site