Rerurn to Romy the Cat's Site
In the Forum: Audio Discussions
In the Thread: Initial thoughts about new/old Lamm ML2s
Post Subject: ... and this is a whole idea.Posted by Romy the Cat on: 3/13/2007
Jessie, this is a whole idea: do not get a signal into the ML2. It is NOT an operations sate but juts immediate testing. Do NOT short the ML2 input when preamp is connected to ML2 XLR inputs. By shorting the amp’s inputs you hear the inner-noise of the amps itself. The cap might dry up; the tube could pick noise and many other thighs…. BTW, if you use Lamm L1 as a preamp then be advised that it notoriously noise in context of high sensitively speakers. Lamm L1/L2 has MOSFET output stage and the have a strong MF noise. So I ma sure that even with mo shorting of ML2 but only by disconnecting L1 you will have all noise after ML2 gone. Rerurn to Romy the Cat's Site