Rerurn to Romy the Cat's Site


In the Forum: Analog Playback
In the Thread: Copper Mat on a Micro Seiki Gun Metal Platter
Post Subject: Mass is King!Posted by jam on: 10/28/2017
I have to agree with Wellington. To be fair we both use stainless steel platters (heavier than stock) and use CU-180 mats to damp the platter which ensures an almost dead platter, way better than any acrylic, hard rubber and felt mat I have tried. Stainless steel platters sound much better than the stock platters, Micro Seiki realized this and offered it as a higher cost option (rare). This is a pretty simple experiment as Wellington has stated. For the most part the use of the HS-80 is cosmetic and I have not been able to hear any difference in my setup. (maybe another RX-5000 as a flywheel might work?) If not set up correctly(which can be a pain) it can cause problems. 
In my opinion the best improvements to a RX-5000 are the use of a stainless steel platter with a copper mat, rebuilding the bearing and rebuilding the motor with the possibility of a new power supply. I have two RX-5000's ad one remained stock while the other was rebuilt (same tonearm and cartridge) when I was satisfied that the changes made an improvement I rebuilt the other one.

Rerurn to Romy the Cat's Site