Rerurn to Romy the Cat's Site


In the Forum: Horn-Loaded Speakers
In the Thread: Another time aligned 5-way horn project
Post Subject: TH is under examinationPosted by Murataltuev on: 9/11/2015
fiogf49gjkf0d
 kodomo wrote:
I don't think you can align the tapped horn. My tapped horn has a total length around 5 metres. To time align that with my other drivers, its got to be around 5 metres closer than others. The only other solution is delaying the rest of the channels...
If you are going to cross it around 30z, I don't know if alignment will create much of a difference. I am building my 5 way down to 38hz flat and have the tapped horn as a 6th channel. I will report to you about my experience of the sound. However I won't be aligning my 6th channel and actually won't be using it on music. My idea is to use it on movies only...
I have also changed my bass array from 12" scanspeaks to 16" TAD 1601b's. Rather than having 3 on each side, I will have 2 on each side and still with better efficiency and response.
I'm also not sure that I continue using TH for music reproduction. I have some idea to get time-aligned LF at 100db! I share later when I get result.
Can you, please, share what channels you have: drivers and horn frequencies ?

Rerurn to Romy the Cat's Site