Rerurn to Romy the Cat's Site


In the Forum: Horn-Loaded Speakers
In the Thread: Another time aligned 5-way horn project
Post Subject: Don't drop itPosted by anthony on: 8/19/2015
fiogf49gjkf0d
That "curl" beyond 350mm in your diagram is what the LeCleach profile is all about...drop it and it is not a LeCleach anymore (it is more or less Tractrix) and the benefits of that profile to do with the horns lower range are lost.  Besides, a 1m diameter horn is just fine to integrate because it get the midrange at the right height, but I would try to go lower than 200Hz because the frequencies that we use to localise sound go down to about or just below 100Hz or so and it will probably help imaging.


EDIT:  Not sure we are on the same page regarding frequency range for this horn

Rerurn to Romy the Cat's Site