Rerurn to Romy the Cat's Site
In the Forum: Horn-Loaded Speakers
In the Thread: Another time aligned 5-way horn project
Post Subject: Drivers first ?Posted by Murataltuev on: 8/16/2015
fiogf49gjkf0d
Well, I read somewhere here, when you suggested to start from general configuration and horn design.
Do you suggest first to choose drivers ?
I have 2m long 100Hz horn which covers 200-4000Hz and I like it very much, but 2m is too long for time-aligned system,
so I'm in process of ordering 200Hz LeCleac'h horn...it is "just" 730mm long.
I like the idea to cover 300-3000 with one horn, but will have an option to go down to 1000.
To try both options, I've ordered 550Hz LeCleac'h horn and going to make 3000Hz horn.
Then as I expect, for exact drivers in this horns I'll get optimal crossover frequencies.
I also like the idea to use the same driver in both horns, because differences in character of drivers in this range is obvious.
Rerurn to Romy the Cat's Site