Rerurn to Romy the Cat's Site
In the Forum: Melquiades Amplifier
In the Thread: To Milq builders: corrections, simplification, modifications.
Post Subject: Intelligent dynamic viscosityPosted by Romy the Cat on: 10/7/2014
fiogf49gjkf0d
Generally the 105V gas
tube are the best and the most stable gas tubes and if you are willing to use
them then it would be a good idea. You need to recirculate the whole bias
securely to do so and it is tricky. It is not so hard to figure out how to get
from 105V the 4.3V of bias but they are bias line and whatever you do with it hugely
affect sound. The last resistor and the last small cap – all of them do impact sound.
You can do your own experiments of you can use my template. My secretary works
the vales in there are actual values. You do not need to follow but you might
if you wish.
When I was taking about “unintelligent
dynamically” I was referring that the driver tube with my bias demonstrate something
that I called intelligent dynamic viscosity. Find it, I have write about it a
lot. This “intelligent dynamic viscosity” is the key in the amp and without getting
it with my bias I assure you that you did not build/heard Melquiades.
Rerurn to Romy the Cat's Site