Rerurn to Romy the Cat's Site


In the Forum: Melquiades Amplifier
In the Thread: The 6E5P tube data.
Post Subject: 6c33 swing voltagePosted by Celsius on: 11/6/2013
fiogf49gjkf0d
 Romy the Cat wrote:

Why do you think I bout a 1000 of them and closed to the rest of my life my interest in driver tubes?

Still, the 6E5P should not be measured as a driver but heard as a driver – the beauty in this tube is in its sound.

I do not know why it gave to you more power. It is a regular 32-36 times gain, it means with 4V bias you can get a lot of voltage from this tube with no problems. I uselessly drive it with 200V and you might drive it as hot at 6.5W, with 8.5W max but I would not go there. The only concern that I have, since I knew that you will be juts measure them, if I did not send you the 6E5P-E. The 6E5P-E is impulse venison of the tube and although it measures virtually identically but it does not sound as good, it is ¼ smaller as well.

BYW, the benefits that you got were so far not the 6E5P advantages but you juts stopped to use absolutely not appropriate tube (7788) to drive your 2a3. John, I am very much not in position to argue with your about tubes but to use 7788 at line voltage as … a driver is absolutely beyond my believe in mankind sincerity… :-)

The Cat


Hi Romy, this is my first comment here ( hello everybody ), but follow you for a long time, thanks for you job.

Well I try to understand but for me is not clear, the 6c33 need bias -70 to -90 at less the mine.  -80v give  160Vpp swing voltage  and 160vpp is difficult to obtain from 6E5P, I am sure that I am wrong but prefer to understand better that only copy the schematic.
I would like to change my actual driver 6ac7 who give 200Vpp but the sound is good but not great.

I find anothers driver that maybe are better, as E180F  or 6485 (6J5P) that give more swing, but I follow thinking that I am wrong only need to read here but dont understand, who can show me the way.

Rerurn to Romy the Cat's Site