Rerurn to Romy the Cat's Site
In the Forum: Horn-Loaded Speakers
In the Thread: Macondo’s Midbass Project – the grown up time.
Post Subject: The horn painting jobPosted by Romy the Cat on: 9/15/2010
fiogf49gjkf0d
It is hard to see from the picture but the inner walls of the horns are not parallel. In fact there are no two parallel surfaces in the horn – that was the requirement. Some when any kind of roll lays on the section 2 or 3 surface then it is expected that the handle of the roll to be in horizontal 90 degree angle against the painted surface. Unfortunately in this horn it is not possible and even if I stick a roll to where it needs to be then the roll attached to broom will not lay parallel to surface. What is needed is some kind of special rolling frame where roll has freedom against own frame, some kind of ball join. If someone know this type of frame then let me know ASAP as I need it for final paint. The final paining will be two coats – first is textured layer (paint with sand) and second is flat paint over the textured layer. The textured surface will be there but it will be a bit smoothed out by the second layer….
The CatRerurn to Romy the Cat's Site