Rerurn to Romy the Cat's Site
In the Forum: Horn-Loaded Speakers
In the Thread: Macondo’s Midbass Project – the grown up time.
Post Subject: Another way of rising the resonance frequencyPosted by haralanov on: 8/31/2010
fiogf49gjkf0d
 Romy the Cat wrote: |
| The volume of tone was rising faster than the volume of pressure... |
|
Congratulations. It is very promising result. I think the degree of tonal density will jump to even higher level if you attach a thick felt on the back side of the Vitavox chassis just behind its cone. It will cost you almost no efforts to try it. Also instead of using electrical tape, try to seal the back of the driver with a 2mm thick sheet of microperforated tonewood and then glue a leather layer over it. Then you could also pierce multiple tiny holes in the leather until you get the same 42Hz tunning. I think you will get much more interesting tone if you use this method.
Regards,
Haralanov
Rerurn to Romy the Cat's Site