Rerurn to Romy the Cat's Site
In the Forum: Horn-Loaded Speakers
In the Thread: The best 20 hz bass horn
Post Subject: The 20Hz horn on 416sPosted by Romy the Cat on: 8/26/2010
fiogf49gjkf0d
Audiofilofine, if you do not mind then can you name you posts more identifiably and not with the same name?
On the subject: I do not think that drawing shall be important to you. If you build as you say 20Hz horn then the design of the horn will be more than 80% depended on the layout of your room, location of your playback and the objective HOW you intend to use and integrate that horn.
Horn Savant, the 416’s are good drivers, they in contrary to many other Altec 15 inchers have very good dynamic rise – they just do not stop and are gin up and up. What was your resonant frequency after loading? The 416 are 25Hz drivers, after loading and with two drivers it might be deep in teens. From the picture it looks like you keep the back chamber of extra large space, or even wide open. Did you find in this situation that the cone is a bit “loose?”
The CatRerurn to Romy the Cat's Site