Rerurn to Romy the Cat's Site
In the Forum: Melquiades Amplifier
In the Thread: Single-stage Melquiades vs. DHT amps
Post Subject: The Milq’s MF front-end is donePosted by Romy the Cat on: 5/4/2009
fiogf49gjkf0d
Here is the picture and you might see in front sitting the Dave Slagle’s MF filtering choke, It is not shield but is hangs along relatively far from anything AC-annoying. I did not measure the filer yet but subjectively it sounds fine, somewhere where it shall be.
The front end is very much is done permanently and might be closed up. I was playing today the MF channels, trying to evaluate if the non- shield choke would pick up some noise. I am not sure if it does as generally the amp I would call it “noisy”. It is not the I can hear “noise” at listening position but if I stick my heard into the horn then it certainly has some noise and the most important is that I do not really like the harmonics of THAT noise.
Well, I am not alerted yet as the amp if not close up, the output stage is sitting outside and it might suck garbage from anywhere. Still I ma so accustomed for absolute silence from my horn that whatever minor the DHT does is sound different. At this point I am not considering the DC filaments, let see how it will behave when I close it up. Funny is that with this topology it is hard to figure out where the noise is coming from – the front or back end….
The CatRerurn to Romy the Cat's Site