| Search | Login/Register
   Home » Audio Discussions » Baseline measurements and post processing software (2 posts, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (2 items) Select Pages: 
01-06-2005 Post does not mapped to Knowledge Tree
skushino
Seattle, WA
Posts 93
Joined on 07-07-2004

Post #: 1
Post ID: 478
Reply to: 478
Baseline measurements and post processing software

is naloxone and naltrexone the same

naltrexone and naloxone knagis.miga.lv
Before treating my room, I want to benchmark the performance. Seeking a credible and contemporary resource (not Everest) where I can learn PC-based measurement and post-processing. Emphasis on test and measurement over modeling.

It is a bonus if the sw can also be used to calibrate my analog set-up (spectrum analyzer / oscilloscope / channel separation, crosstalk, etc).

Much thanks.
Scott

01-07-2005 Post does not mapped to Knowledge Tree
skushino
Seattle, WA
Posts 93
Joined on 07-07-2004

Post #: 2
Post ID: 483
Reply to: 478
ETF (Energy Time Freq) sw
I learned about this sw package, ETF. 

http://www.etfacoustic.com/index.html

It includes MLS and sweeps response measurements, RT/60, 1/12 octave resolution, etc.  These are the functions I'm interested in.  I'll give it a try.

Anyone use this and care to share their experience?

scott
Page 1 of 1 (2 items) Select Pages: 
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts