Rerurn to Romy the Cat's Site

Audio For Dummies ™
Topic: Bass info

Page 1 of 1 (6 items)


Posted by Romy the Cat on 04-17-2011
fiogf49gjkf0d
Audio people are so accustomed with a comfortable believe that as frequency drops the stereo information becomes less important that no one seems question this old believe.  The reality is very much do not support this. From what I can observe the stereo information live in sound down to lowers frequency, you just need to know what to listen to “get” it.

I am ruining now my ULF channels at 20Hz with 3rd order- you understand that my ULF produce only very lowers bass. So, flipping the signal from mono to stereo and reversing the channels do produces very notable difference. What you listen my playback with mono bass then I have less complexity in Sound and Sound feel like a large wall with ornamentations. With Stereo bass the wall is replaced with animated and constantly changing fields, the clouds of Sound. Also, the “clouds” in stereo mode has capacity to softer right and left instruments of orchestra with different force.  So, say no to mono LF section regardless what kind topology and type you use. Remember, there are very few rules that you do not want to screw with: your LF much not be between your MF and your LF much not be mono.

Rgs,
Romy the Cat

Posted by ArmAlex on 04-19-2011
fiogf49gjkf0d
Dear Romy,Most of audiophiles listen to ported bass so there is no info left in LF to worry about.Best regards,Armen

Posted by Scott L on 12-19-2015
fiogf49gjkf0d
 ArmAlex wrote:
Dear Romy,Most of audiophiles listen to ported bass so there is no info left in LF to worry about.Best regards,Armen


Once again the misconception that any or all ported bass is evil and must be eliminated. This is simply not true. What is true, however, is that many or most all ported (vented) woofer systems have been done incorrectly.

Posted by Romy the Cat on 12-19-2015
fiogf49gjkf0d
 Scott L wrote:

Once again the misconception that any or all ported bass is evil and must be eliminated. This is simply not true. What is true, however, is that many or most all ported (vented) woofer systems have been done incorrectly.
Scott, would you be kind to name a loudspeaker where is ported bass made properly from your point of view?

Posted by decoud on 12-19-2015
fiogf49gjkf0d
That is given in the psychophysics: binaural phase offset sensitivity goes up with wavelength.

Posted by Scott L on 12-19-2015
fiogf49gjkf0d
 Scott L wrote:
I had to take pause before I answered here; realizing in an almost shocking manner [that] I don't listen to many commercial loudspeakers. I am largely involved in the (gasp) DIY community, where it's also very often done incorrectly. My last very satisfactory retail loudspeaker experience was that of a B&W Matrix 801. Commercial audio peoples and audiophiles alike, tend to draw carved-in-stone conclusions from a very limited exposure, or experience. For example, "I hate horns". Yes, because person (Mr. A) once listened to one or two gawd awful horns and therefor concludes ALL horns must therefor[also] be awful. With respect to ported verses sealed systems, ported are indeed more  challenging to get correct; being lazy about paying attention to design/and/ construction details may easily lead to disaster. I should also include my finding here with experience in muti-way systems. A sub-woofer section may indeed be sealed, or vented; but I have obtained the very best results with a mid-bass section being sealed, where blended with either a vented, or, sealed sub bass. Never, ever in a billion years should there be an attempt on sub-woofing with an open baffle. Infinite baffle? Oh yes, but never an open baffle.
Scott, I understand where you are coming from. I was asking about commercial speakers because it is easy to find a common denominator when we TALK about. I do have in my mine a few models that I feel done more or less acceptable if they are driven with current-capable amplification. Still, they are acceptable to a point, to a point of reference….
 
I do not what is done better in DIY world. My personal DIY experience with ported bass was disasters but I was very little informed what I was doing. It is possible that you are right and proper DIY might breed something that best commercial loudspeakers can’t reach. I personally do not think so. The problem (as I see it) with port is not in the “paying [low] attention to design/and/ construction details” but rather a fundamental fault that factor into the idea of ported bass. I can describe it again (I did it somewhere before) but it is not the thread about ported bass.
 
I truly do not need to argue about it. If you feel that you with your practice have overridden everything that you do not like about ported bass then my salute to you. We truly do not need to be agree in our take regarding the ported bass capacity. 

Rgs, the Cat

Page 1 of 1 (6 items)